Victron MultiPlus-II 48/5000 70-95 120V Electrical

MultiPlus-II 48/5000 70-95 120V

The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an External current sensor option that extends the PowerControl and PowerAssist function to 100A.

PowerControl and PowerAssist - Increase the capacity of the grid or a generator

A maximum The current of the network or generator can be adjusted. The MultiPlus-II will then take into account other AC loads and use whatever is extra to charge the battery, thus avoiding overloading the generator or grid (PowerControl function).

PowerAssist takes the principle of PowerControl at a higher level. additional dimension. Where peak power is often only required for a limited period, the MultiPlus-II will compensate for insufficient generator, shore or grid power with battery power. When the load decreases, the available energy is used to recharge the battery.

Solar energy: AC power available even while on grid. Failure

The MultiPlus-II can be used in photovoltaic and other off-grid as well as grid-connected alternative energy systems. It is compatible with solar charger controllers and grid-connected inverters.

Two AC outputs

The main output has uninterruptible functionality. The MultiPlus-II supports powering connected loads in the event of a grid outage or when shore/generator power is disconnected. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption.

The second output is active only when AC power is available at the input of the MultiPlus- II. Loads that must not be dischargedbattery, such as a water heater, for example, can be connected to this output.

Virtually unlimited power thanks to parallel, split-phase and three-phase operation

Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/3000/35 units, for example, will provide an output power of 15 kW / 18 kVA with a load capacity of 210 amps.

In addition to the parallel connection, two units of the same model can be connected for 240V split-phase output, and three units of the same model can be configured for three-phase output. But that's not all: up to 6 sets of three units can be connected in parallel per phase.

On-site system configuration, monitoring and control

Parameters can be changed in minutes with VEConfigure software (computer or laptop and interfacee MK3-USB required).

Multiple monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, Laptop, Computer, Bluetooth (with VE Smart Dongle. Optional bus), battery monitor and multiple digital control panel.

Remote setup and monitoring

Install a Color Control GX or other product GX to connect to the Internet. Operational data can be stored and displayed on our VRM (Victron RemoteManagement), free of charge. Once connected to the Internet, systems can be accessed remotely and settings can be changed.

Specifications:

PowerControl and PowerAssist: Yes
Transfer switch: 95A
Maximum AC input current: 95A

Inverter specifications:

DC input voltage range: 39 -66 V
Output: Output voltagetie 120 VAC ± 2% / Frequency 60 Hz ± 0.1% (1)
Continuous output Power at 25°C (3): 5,000 VA
Continuous output power at 25°C: 4000 W
Continuous output power at 40°C: 3700 W
Continuous output power at 65°C: 3000 W
Peak power: 9000 W
Maximum efficiency: 96%
No-load power: 15 W
No-load power in AES mode: 10 W
No-load power in search mode: 3 W

Charger specifications:

Charger Specifications: AC Input: Input Voltage Range 90-140 VAC / Input Frequency: 45-65 Hz charging "Absorption": 57.6 V

Charging voltage "Float": 55.2 V

Storage mode: 52.8 V

Current maximum battery charge (4): 70 A

Battery temperature sensor: Yes

General specifications:

SoAuxiliary part: Yes (42 A)
External AC current sensor (optional): 100 A
Programmable relay (5): yes
Protection: a – g
VE.Bus communication port: for parallel, split-phase and three-phase operation, remote monitoring and system integration
Com. Port: Yes, 2x
Remote On/Off: Yes
Operating Temperature Range: -40 to +65°C (-40 to 150°F) (assisted cooling by fan)
Humidity (non-condensing): max. 95%

Housing specifications:

Material and Color: Steel, blue RAL 5012
Protection category: IP22
Battery-Connection: M8 bolts
120 V AC-Connection: Screw terminals 35 mm² (2 AWG)
Weight: 32 kg / 71 lb.
Dimensions (hxwxd): (mm)676 x 330 x 164 / (inch) 26.6" x 13.0" x 6.5"

Standards:

Listings: UL1741 pending
Safeity: EN-IEC 60335-1, EN-IEC 60335-2-29, CSA 22.2 107.1-16
Emission, immunity: EN 55014-1, EN 55014- 2, EN-IEC 61000-3 -2, EN-IEC 61000-3-3, EC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3

*Note: for a short time , this product was called MultiGrid-II

Please contact your reseller for any returns, repairs, or support issues related to this product.

PRODUCT ID : 99442
SKU: NVN-99442
CSKU: CWR-99442
REWRITE: 110553-victron-multiplus-ii-48-5000-70-95-120v
MPN: PMP482505110
UPC :
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON MULTIPLUS- II 48/5000 70- 95 120 V
NAME_EX:
PTITLE: Victron MultiPlus-II 48/5000 70-95 120 V
TYPE: Electric | Charger/Inverter Combos
SELLER: Victron Energy
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Victron MultiPlus-II 48/5000 70-95 120 V Product description

MultiPlus-II 48/5000 70-95 120 V

The MultiPlus-II is a multifunctional inverter/charger device with all the features of the MultiPlus, plus an external current sensor option that extends PowerControl and PowerAssist to 100A.

PowerControl and PowerAssist - Increase capacity from the network or a generator

A maximum network or generator current can be defined. The MultiPlus-II will then take into account other AC loads and use whatever is extra to charge the battery, thus avoiding overloading the generator or grid (PowerControl function).

PowerAssist takes the principle of PowerControl at a higher level. additional dimension. Where peak power is often only required for a limited period, the MultiPlus-II will compensate for insufficient power from the generator, dock ornetwork with battery power. When the load decreases, the available energy is used to recharge the battery.

Solar: AC power available even in the event of a grid outage

The MultiPlus-II can be used in off-grid as well as grid-connected photovoltaic and other alternative energy systems. It is compatible with solar charger controllers and grid-connected inverters.

Two AC outputs

The second output is active only when AC power is available.the at the entrance of the MultiPlus-II. Loads that should not discharge the battery, such as a water heater, for example, can be connected to this output.

Virtually unlimited power thanks to parallel, split-phase and three-phase operation

Up to 6 Multis can work in parallel to achieve higher power output. Six 48/3000/35 units, for example, will provide an output power of 15 kW / 18 kVA with a load capacity of 210 A.

In addition to the parallel connection, two units of the same model can be connected for a 240V split-phase output and three units of the same model can be configured for three-phase output. But that's not all: up to 6 sets of three units can be connected in parallel per phase.

On-site system configuration, monitoring and control

Parameters can be changed in minutes with the softwareel VEConfigure (computer or laptop and MK3-USB interface required).

Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with optional VE.Bus smart dongle), battery monitor and multiple digital control panel.

Remote setup and monitoring

Install a Color Control GX or another GX product to connect to the Internet. Operational data can be stored and displayed free of charge on our VRM (Victron Remote Management) website. Once connected to the Internet, systems can be accessed remotely and settings can be changed.

Specifications:

PowerControl and PowerAssist: Yes
Transfer switch: 95A
Maximum AC input current: 95A

Inverter specifications:

BeachDC input voltage: 39 -66 V
Output: Output voltage 120 VAC ± 2% / Frequency 60 Hz ± 0.1% (1)
Continuous output Power at 25°C (3): 5000 VA
Continuous output power at 25°C: 4000 W
Continuous output power at 40°C: 3700 W
Continuous output power at 65°C: 3000 W
Peak power: 9000 W
Maximum efficiency: 96%
Power at no load: 15 W
Power at no load in AES mode: 10 W
Power at no load in search mode: 3 W

Charger Specifications:

AC Input: Input Voltage Range 90 -140 VAC / Input Frequency: 45 – 65 Hz
"Absorption" charging voltage: 57.6 V
"Float" charging voltage: 55.2 V
Storage mode: 52.8 V
Maximum battery charging current (4): 70 A
Battery temperature sensor: Yes

General specifications:

Auxiliary output: Yes (42 A)
External AC current sensor (optional): 100 A
Programmable relay (5): Yes
Protection: a – g
VE.Bus communication port: for parallel, split-phase and three-phase operation , remote monitoring and system integration
Com for general purpose. Port: Yes, 2x
Remote On/Off: Yes
Operating Temperature Range: -40 to +65°C (-40 to 150°F) (assisted cooling by fan)
Humidity (non-condensing): max. 95%

Housing specifications:

Material and Color: Steel, blue RAL 5012
Protection category: IP22
Battery-Connection: M8 bolts
120 V AC-Connection: Screw terminals 35 mm² (2 UNWG)
Weight: 32 kg / 71 lb.
Dimensions (hxwxd): (mm) 676 x 330 x 164 / (inch) 26.6" x 13.0" x 6.5"

Standards:

Listings: UL1741 pending
Safety: EN-IEC 60335-1, EN -IEC 60335-2-29, CSA 22.2 107.1-16
Emission, immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3

*Note: For a short time this product was called MultiGrid-II

Please contact your dealer for any return, repair, or support issues related to this product.

Frequently Asked Questions (FAQ) at About VICTRON MULTIPLUS -II 48/5000 70-95 120V Who is Victron Energy?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel at effectively combining two or more separate power sources, are recognized internationally as the best professional choice forresilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and much more.

Save $286 when you purchase the Victron MultiPlus-II 48/5000 70-95 120V for only $1,620 at NVN Marine! Free same day delivery before 3 p.m. Technical specifications Victron MultiPlus-II 48/5000 70-95 120 V

Type:	Electric \| Charger/Inverter Combos
Supplier:	Victron Energy
User Guide:	Download PDF
Product Manual:	Download PDF

User reviews Victron MultiPlus-II 48/5000 70-95 120VVictron MultiPlus-II 48/5000 70- 95 120V Shipping and; Back