Victron Orion-Tr Smart 24/12-20A (240W) isolated DC-DC charger Electrical

Orion-TR Smart Isolated DC-DC Charger 24/12-20 Amp (240 W)

The Orion-Tr Smart Isolated DC-DC Charger serves as a DC- DC battery charger or power supply (also designed for use as a constant voltage source), providing a wide input and output voltage range. This is particularly important in the case of vehicles equipped with a Euro 5 or Euro 6 smart alternator, which often provides too low a charging voltage even when the engine is running or when running extended cable lengths, as is often the case in boats and campers, lead to voltage drop. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.

Bluetooth Smart Enabled

Any smartphone, tablet or other Bluetooth enabled device can be used to monitorer, change settings and update the charger when new software features are available
Instant playback: The VictronConnect app can display key data, including warnings and alarms, on the page of list of devices without the need to connect to the product

Fully programmable

Battery charging algorithm (configurable) or fixed output. Orion-Tr Smart 12/12-30 Orion-Tr Smart 12/12-30
Smart alternator compatibility: engine running detection mechanism

Adaptive 3- Staged charging algorithm: Bulk – Absorption – Float

For lead batteries it is important that during superficial discharges the absorption time is short to avoid overcharging the battery. After a deep discharge, the absorption time is automatically increased to ensure that the battery is fullement recharged.
For lithium batteries, the absorption time is fixed; default is 2 hours
Alternatively a fixed output voltage can be chosen

Suitable for use in vehicles fitted with a Smart Alternator (Euro 5 and Euro 6 Engines)

The built-in engine stop protection will shut down the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).

Remote on/off

An on/off switch Remote stop or relay contact can be connected to a bipolar connector. Alternatively, the H (right) terminal of the bipolar connector can be switched to battery plus, or the L (left) terminal of the bipolar connector can be switched to battery minus (or the chassis of a vehicle, for example). ).

All models are short-c resistantircuits and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

All models are short circuit resistant and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

All models are short circuit resistant and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

Protected against high temperatures

The output current will decrease at high ambient temperatures.

Protection IP43

When installed with screw terminals facing down.

Screw terminals

No special tools are required for installation. Input fuse (non-replaceable)acceptablee)

*Input fuse (non-replaceable)

Specifications:

Input voltage range : 16-35V
Undervoltage shutdown: 14V
Undervoltage restart: 15V
Rated output voltage : 12.2 V
Output voltage adjustment Range: 10-15 V
Output voltage tolerance: +/- 0.2 V
Output noise: 2 mV rms
Cont. Output current at rated output voltage and 40 degrees C: 20 A
Maximum output current (10 S) at rated output voltage minus 20%: 25 A
Short circuit output current: 50 A
Continued. Power output at 25 degrees C: 300 W
Cont. Output power at 40 degrees C: 240 W
Efficiency: 88%
No-load input current (2): <100 mA
No load current (2): standby: less than 1A
Can be used as power supply: yes, output voltage can be adjusted with Bluetooth
G isolationalvanic: 200 V DC between input, output and enclosure
Operating temperature range -20 to +55 °C (3% reduction per °C above 40 °CC)
Humidity: Max. 95% non-condensing
DC connection: screw terminals
Maximum cable size: 16 mm² AWG6
Weight: 1.3 kg (3 lb)
Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inches)
Protection category IP43 (electronic components) , IP22 (connection area)
Standards: Safety - Emission / Immunity; Automotive Directive - EN 60950 EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 ECE R10-5

Please contact your dealer for any return, repair, or support issues related to this product.

PRODUCT ID: 103510
SKU: NVN-103510
CSKU : CWR-103510
REWRITE: 114621-victron-orion-tr-smart-24-12-20a-240w-isolated-dc-dc
MPN: ORI241224120
UPC: 8719076046080
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON ORION-TR SMART 24/12 20A (240W) ISOLATED DC-DC
NAME_EX:
PTITLE: Victron Orion-Tr Smart 24/12-20A (240W) DC-D isolatedCharger C
TYPE: Electric | DC to DC Converters
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Victron Orion-Tr Smart 24/12-20 A (240 W) isolated DC-DC charger Product description

Orion-TR Smart 24/12-20 A (240 W) isolated DC-DC charger

The Orion-Tr Smart Isolated DC-DC Charger serves as a DC-DC battery charger or power supply (also designed to be used as a constant voltage source), providing a wide voltage range entry and exit. This is particularly important in the case of vehicles equipped with a Euro 5 or Euro 6 smart alternator, which often provides too low a charging voltage even when the engine is running or when running extended cable lengths, as is often the case in boats and campers, lead to voltage drop. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.

Bluetooth Smart Enabled

Any smartphone, tablette or other Bluetooth enabled device can be used to monitor, change settings and update the charger when new software features become available. me available
Instant playback: VictronConnect app can display key data , including warnings and alarms, on the device list page without the need to log into the product

Fully programmable

Battery charging algorithm (configurable) or fixed output. Orion-Tr Smart 12/12-30 Orion-Tr Smart 12/12-30
Smart alternator compatibility: engine running detection mechanism

Adaptive 3- Staged charging algorithm: Bulk – Absorption – Float

For lead batteries it is important that during superficial discharges the absorption time is short to avoid overcharging the battery. After a teacher dischargewave, the absorption time is automatically increased to ensure that the battery is fully recharged.
For lithium batteries, the absorption time is fixed; default is 2 hours
Alternatively a fixed output voltage can be chosen

Suitable for use in vehicles fitted with a Smart Alternator (Euro 5 and Euro 6 engines)

Built-in engine stop detection will shut down the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).

Remote on/off

All models are short circuit resistant and can be paralleled to increase output current

Unlimited number of units can be connected in parallel.

All models are short circuit resistant and can be connected in parallel to increase the output current

A number Unlimited units can be connected in parallel.

All models are short circuit resistant and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

Protected against high temperatures

The current output will decrease at high ambient temperatures.

IP43 protection

When installed with the screw terminals facing down.

Screw terminal

NoneNo special tool is required for installation. Input fuse (non-replaceable)

*Input fuse (non-replaceable)

Specifications:

Input voltage range: 16-35V
Undervoltage shutdown: 14V
Undervoltage restart: 15V
Rated output voltage: 12.2V
Output voltage adjustment range: 10-15V
Output voltage tolerance: +/- 0.2 V
Output noise: 2 mV rms
Cont. Output current at rated output voltage and 40 degrees C: 20 A
Maximum output current (10 S) at rated output voltage minus 20%: 25 A
Short circuit output current: 50 A
Continued. Power output at 25 degrees C: 300 W
Cont. Output power at 40 degrees C: 240 W
Efficiency: 88%
No-load input current (2): <100 mA
No load current (2): standby: less than 1 A
Can be used as a power supplytation: yes, output voltage can be adjusted with Bluetooth
Galvanic isolation: 200 VDC between input, output etc.
Operating temperature range -20 to +55 °C (3% reduction per °C above 40°C)
Humidity: Max. 95% non-condensing
DC connection: screw terminals
Maximum cable size: 16 mm² AWG6
Weight: 1.3 kg (3 lb)
Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inches)
Protection category IP43 (electronic components) , IP22 (connection area)
Standards: Safety - Emission / Immunity; Automotive Directive - EN 60950 EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 ECE R10-5

Please contact your dealer for any return, repair, or support issues related to this product.

Save $28 when you buy the Victron Orion-Tr Smart 24/12 isolated DC-DC charger-20A (240W)for only $159 from NVN Marine! Same day dispatch before 3 p.m. Victron Orion-Tr Smart 24/12-20A (240W) Isolated DC-DC Charger Videos Victron Orion-Tr Smart 24/12-20A (240W) Isolated DC-DC Charger Technical Specifications

Type:	Electric \| DC to DC Converters
Supplier:	Victron Energy
Weight:	3.0 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

User reviews for Victron Orion-Tr Smart 24/12-20A (240 W) Isolated DC-DC ChargerVictron Orion-Tr Smart 24/12-20A (240 W) DC Charger -DC insulated Shipping & Returns

Shipping Weight:	3.0 lbs
Box sizes:	4.00 (h) x 6.00 (w) x 9.00 (w)
Cu feetbes:	216.0

For the shipping policy shown, please see our shipping policy 'shipping and you can find our return and refund policy here.