Victron Orion XS Smart 12/12 50A (700W) DC-DC charger Electrical

50A (700W) DC-DC Smart Buck-Boost Charger - Non-Isolated

The DC-DC Smart BuckBoost charger can be used as a battery charger or as a Power supply with a wide input and output voltage range. In charger mode, the four-stage charging algorithm will increase battery life by properly charging the battery.

Especially in the case of vehicles equipped with a Euro 5 or 6 smart alternator, which often provides too low a charging voltage, even when the engine is running or when voltage drops on long cables, controlled charging is crucial.

Controlled charging also protects the systems alternator lithium battery against overcharging, because the low impedance of lithium batteries results in high alternator current.

In power mode, the output voltage remains stable regardless of the applied load or voltage fluctuating input (within specified range). The tenoutput voltage is fully adjustable and remains independent of the input voltage, thanks to the automatic regulator.strengthening control. This control also ensures that the current will never exceed the set value, even when the input voltage is higher than the output voltage.

The Smart BuckBoost can be configured to provide power only when the engine is running. This is possible thanks to the integrated engine stop detection. This eliminates the need to adjust wiring in the vehicle or add an engine detection sensor to determine if charging can start. This also prevents the voltage on board the vehicle from becoming too low. In addition to this detection, the Smart BuckBoost can also be forced via the remote on/off port.

The Smart BuckBoost is fully programmed and monitored using the VictronConnect app. This also includes remote access via VictronConnect-Remote (VC-R) whenConnected to a GX device (requires GX device connection to VRM portal) via the built-in VE.Direct port, monitoring via the GX remote console or from a PC, Apple computer with macOS or associated Android device to a VInterface E.Direct to USB and VictronConnect. Discover all configuration and monitoring options in the Configuration and Monitoring with VictronConnect chapter [15] and in the VictronConnect manual.

In the box

Smart Buck-Boost 50A (700W) non-insulated DC-DC charger 12/12-50 with terminal block for remote on/off connection

Features

Compatibility with smart alternators

It is common for automobile manufacturers to install "smart" alternators controlled by the ECU (Engine Control Unit) to increase fuel efficiency and reduce emissions. Smart alternators provide voltage ofvariable output and shut off when not needed. The Smart BuckBoost has a built-in mechanism that detects whether the engine is running (engine stop detection), so the charger is only activated when the alternator is supplying power. This ensures that the charger only consumes power when the alternator is supplying power.

Separation of Starter Battery and Service Battery

The Smart BuckBoost separates the starting battery from the service battery.

Comprehensive electronic protection

The charger is protected against overheating ( lower plate>90 °C) by reducing the output power when the maximum product temperature is reached.

Protected against overloads
Protected against short circuits
Protected against excessive temperatures

Four-stage adaptive charging

Smart BuckBoost is compatibleFigured by default for a three-step charging process.

Bulk — Absorption — Float — Storage

Bulk - Au During this phase, the Smart BuckBoost provides as much charging current as possible to quickly charge the batteries.

Absorption - When the battery voltage reaches the voltage setting d absorption, the charger switches to constant voltage, that is to say in absorption mode. For lead acid batteries, it is important that the absorption time remains short during superficial discharges to avoid overcharging the battery. After a deep discharge, the absorption time is automatically increased to ensure that the battery is fully charged again. For lithium batteries, the absorption time is fixed, 2 hours by default. Fixed or adjustable modes can be selected via battery settings.

Floating - Pendant this phase, the battery is charged with a trickle charge voltage to keep it in a fully charged state. When the battery voltage drops well below this level, for example due to high charging for at least 1 minute, a new charging cycle is activated.

Storage - The battery voltage is maintained at the configured storage voltage, which is slightly reduced.

Flexible charging algorithm

The Smart BuckBoost features fully programmable charging algorithms and eight pre-programmed charging algorithms. battery settings. Configurable with VictronConnect.

Adaptive Absorption Time

In adaptive absorption time mode, the correct absorption time is calculated automatically. Configurable with VictronConnect.

Repeated absorption

To refresh the battery and prevent slow self-discharge duringIn the storage phase over an extended period, a 1- hour absorption charge will occur automatically every 7 days (or as configured).

Temperature compensated charging

The optimal charging voltage of a lead-acid battery is inversely proportional to temperature. The Smart BuckBoost DC-DC charger measures the ambient temperature at the start of the charging phase and compensates for the temperature during charging. The temperature is measured again when the battery charger is in low current mode during absorption or storage. Special settings for a cold or hot environment are therefore not necessary.

Adjustable charging current

The charging current is adjustable with a minimum of 0.1A step size. Configurable with VictronConnect.

Low temperature shutdown

Prevents damage to lithium batteries by turning off the charger at low temperaturesnature. Configurable with VictronConnect.

Input voltage lockout

Stop the charger when the input voltage drops below the lockout value and restart when the input voltage exceeds the restart value. Configurable with VictronConnect.

Remote On/Off

The inverter can be turned on and off remotely via the remote on/off connector or the VictronConnect app. Typical applications include a hardwired switch or lithium battery with a battery management system (BMS) that has an ATC (allowed to charge) output.

VE.Direct

Monitor and control (on/off) the Smart BuckBoost via a wired connection from a GX device such as the Cerbo GX, Ekrano GX, or use a PC, Apple computer ( requires macOS) or an Android device in conjunction with Vic.tronConnect via VE.Direct wired connection.

Configuration and monitoring via the VictronConnect app and Bluetooth

Built-in Bluetooth Smart: the wireless solution to change settings, monitor activities and update software using smartphones, tablets or other Apple and Android devices. Various parameters can be adjusted and monitored with the VictronConnect app.

This also includes instant reading, which displays the most important data from the Smart BuckBoost (and other smart products) on the list page devices without needing to connect to the product. This includes visual notifications of warnings, alarms and errors that enable at-a-glance diagnosis.

VictronConnect is available for Android, iOS, Windows and macOS. Consult the VictronConnect manual to get the most out of the VictronConnect app when connected to a Victron smart product.

Waterproofche

The Smart BuckBoost meets an entry standard. IP65 rating; thThis means that the product is dustproof and protected against heavy rain.

Quiet

Heat is dissipated by natural convection, eliminating the need a noisy system. cooling fan.

Specifications:

Input voltage range: 9-17V
Voltage adjustment range output voltage: 10-17 V
li>
Output voltage tolerance: +/- 0.25% (max)
Output voltage noise: 10 mV rms
Input and output current setting range: 1 - 50 A
Maximum constant short circuit current: 50 A
Power of continuous output up to 40°C: 700 W
Maximum efficiency: 98.5%
Non- Load current consumption: <100 mA
Standby current consumption: <1.5 mA

Pro specificationsCommunication ports:

Bluetooth Smart: Yes
VE.Direct: Yes

Other specifications :

Operation Temperature range: -20 to +60°C (1.5% derating per °C above 40°C)
Protection category: IP65
DCConnection: Screw terminals
Maximum cable cross section: 25 mm² AWG4
Weight: 0.330 kg (0.73 lb )
Dimensions H x W x D: 137.3 x 123.1 x 40 mm (5.4 x 4.85 x 1.6 inches)

Standards

Safety: IEC 62477-1
Emission: IEC 61000-6-3, EN 55014-1
Immunity: IEC 61000-6-2, IEC 61000-6-1, EN 55014-2
Automotive directive: ECE R10 -5

Please contact your dealer for any returns, repair or support issue related to this product.

PRODUCT ID: 102193
SKU: NVN-102193
CSKU: CWR-102193
REWRITE: 113304 -victron-orion-xs-smart-12-12-50a-700w
MPN: ORI121217040
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON ORION XS SMART 12/12 50AMP (700W) DC-DC CHARGER
NAME_EX:
PTITLE: Victron Orion XS Smart 12/12 50 A (700 W) DC-DC Charger
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES AND PARTS> VEHICLESPARTS AND ACCESSORIES> PARTS AND ACCESSORIES FOR WATERCRAFT

Gtags:

GSpecs:

Victron Orion>

The Smart BuckBoost DC-DC charger can be used as a battery charger or power supply with a wide input and output voltage range. In charger mode, the four-stage charging algorithm will increase battery life by properly charging the battery.

Controlled charging also protects the systems alternator lithium battery against overcharging, because the low impedance of lithium batteries results in high alternator current.

In power mode, the output voltage remains stable regardless of the hparge applied or fluctuating input voltage (within specified range). The output voltage is fully adjustable and remains independent of the input voltage, thanks to automatic Buck-Boost control. This control also ensures that the current will never exceed the set value, even when the input voltage is higher than the output voltage.

The Smart BuckBoost is fully programmed and monitored using the VictronConnect app. This includesalso remote access via VictronConnect-Remote (VC-R) when connected to a GX device (requires connection of GX device to VRM portal) via built-in VE.Direct port, monitoring via console remotely GX or from a PC, an Apple computer with macOS or an Android device in conjunction with a VE.Direct to USB interface and VictronConnect. Discover all configuration and monitoring options in the Configuration and Monitoring with VictronConnect chapter [15] and in the VictronConnect manual.

In the box

Smart Buck-Boost 50A (700W) non-insulated DC-DC charger 12/12-50 with terminal block for remote on/off connection

Features

Compatibility with smart alternators

It is common for car manufacturers to install "smart" alternators controlled by the ECU (Engine Control Unit) to increase fuel efficiencyand reduce emissions. Smart alternators provide variable output voltage and shut off when not needed. The Smart BuckBoost has a built-in mechanism that detects whether the engine is running (engine stop detection), so the charger is only activated when the alternator is supplying power. This ensures that the charger only consumes energy when the alternative or supplies energy.

Separation of the starting battery and the service battery

The Smart BuckBoost separates the starting battery from the service battery.

Comprehensive electronic protection

The charger is protected against overheating (bottom plate>90°C) by reducing the output power when the maximum product temperature is reached.

Protected against overloads
Protected against short circuits
Protected against excessive temperatures

Four-stage adaptive charging

The Smart BuckBoost is configured by default for a three-stage charging process.

Bulk — Absorption — Float — Storage

Bulk - During this phase, the Smart BuckBoost provides as much charging current as possible to quickly charge the batteries. p>

Absorption- When the battery voltage reaches the absorption voltage setting, the charger switch is in constant voltage, that is, in d mode 'absorption. For lead-acid batteries, it is important that the absorption time is short during superficial discharges to avoid overcharging the battery. After a deep discharge, the absorption time is automatically increased to ensure that the battery is fully charged again. For lithium batteries, the absorption time is fixed, 2 hours by default. Fixed or adjustable modescan be selected via battery settings.

Floating - During this phase, the battery is charged with a trickle charge voltage to keep it in a fully charged state . When the battery voltage drops well below this level, for example due to high charging for at least 1 minute, a new charging cycle is activated.

Storage - The battery voltage is maintained at the configured storage voltage, which is slightly reduced.

Flexible charging algorithm

The Smart BuckBoost features fully programmable charging algorithms and eight programmed battery pre-sets. Configurable with VictronConnect.

Adaptive absorption time

In adaptive absorption time mode, the correct absorption time is calculated automatically. Configurable with VictronConnect.

Repeated absorption

To refresh the battery and avoid slow self-discharge during the storage phase over an extended period, a 1-hour absorption charge will occur automatically every 7 days ( or depending on configuration).

Temperature compensated charging

Adjustable Charging current

The charging current is adjustable with a minimum step of 0.1 A. Configurable with VictronConnect.

Low temperature shutdown

Prevents damageages to lithium batteries by turning off the charger at low temperatures. Configurable with VictronConnect.

Input voltage lockout

Stop the charger when the input voltage drops below the lockout value and restart when the input voltage exceeds the restart value. Configurable with VictronConnect.

Remote On/Off

VE.Direct

Monitor and control (on/off) the Smart BuckBoost via a wired connection from a GX device such as the Cerbo GX, Ekrano GX, or use a PC, Apple computer (requires macOS) or an Android device in conjunctionion with VictronConnect via a VE.Direct wired connection.

Configuration and monitoring via the VictronConnect app and Bluetooth

Integrated Bluetooth Smart: the wireless solution to change settings, monitor activities, and update software using Apple and Android smartphones, tablets, or other devices. Various parameters can be adjusted and monitored with the VictronConnect app.

VictronConnect is available for Android, iOS, Windows and macOS. Consult the VictronConnect manual to get the most out of the VictronConnect application whenIt is connected to a Victron smart product.

Waterproof

The Smart BuckBoost complies with an IP65 protection rating; this means that the product is dustproof and protected against heavy rain.

Quiet

Heat is dissipated by natural convection, eliminating the need a noisy system. cooling fan.

Specifications:

Input voltage range: 9-17V
Voltage adjustment range output voltage: 10-17 V
li>
Output voltage tolerance: +/- 0.25% (max)
Output voltage noise: 10 mV rms
Input and output current setting range: 1 - 50 A
Maximum constant short circuit current: 50 A
Power of continuous output up to 40°C: 700 W
Maximum efficiency: 98.5%
Non- Load current consumption: <100 mA
Standby power consumption:<1.5 mA

Communication port specifications:

Bluetooth Smart: Yes
VE.Direct: Yes

Other specifications:

Operation Temperature range: -20 to +60°C (derating by 1.5% per °C above 40 °C)
Protection category: IP65
DC connection: screw terminals
Maximum cross section cable size: 25 mm² AWG4
Weight: 0.330 kg (0.73 lb)
Dimensions H x W x D: 137.3 x 123.1 x 40 mm (5.4 x 4. 85 x 1.6 inches)

Standards

Safety: IEC 62477-1
Emission : IEC 61000-6-3, EN 55014-1
Immunity: IEC 61000-6-2, IEC 61000-6-1, EN 55014-2
Automobile directive: ECE R10-5

Please contact your dealer for any returns, repairs, or support issues related to this product.

Save $57 when you purchase the Victron Orion XS Smar DC-DC Chargert 12/12 50A (700W)for only $328 from NVN Marine! Free same day delivery before 3 p.m. Technical specifications of the Victron Orion Battery chargers Supplier:

Victron Energy

Product manual:

Download PDF

Victron Orion XS Smart 12/12 50A (700W ) DC-DC Charger User Reviews Victron Orion return and refund policy here.