Victron Quattro-II - 24/3000 - 70-50/50 - 2X 120V Electrical

Quattro-II - 24/3000 - 70-50/50 - 2X 120V

Similar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and Charger specifically designed for standard North American 50A 120/240V AC split phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source.

120/240 V input and output, or 120 V input and output (always 120 V output in inverter mode )

Both AC inputs can be powered from a single-phase 120/240 V source or a 120 V single-phase source. When one of the AC sources is available, the Quattro will power its output via AC. The output will therefore mirror the AC input.

The inverter/charger connects to neutral and the preferred input line (L1). The energy necessary for charging the batteries will therefore be taken from L1.

The Quattro switches to inverter operation when no AC source is available. The output of the waveThe voltage is 120 V single phase. In reverse mode, the Quattro connects the two output lines (L1 and L2) together to provide 120 VAC to the loads on either line.

Any 240 V load will therefore be supplied only when the Quattro is powered by a split-phase AC source. . This prevents heavy loads such as water heaters or 240V air conditioners from draining the battery.

PowerControl and PowerAssist - Increase the capacity of the grid or a generator

A maximum network or generator current can be set. The Quattro will then take into account other AC loads and use whatever is extra to charge the battery, thus avoiding overloading the generator or grid (PowerControl function).

PowerAssist brings the principle of PowerControl into another dimension. . Where peak power is often only required for a limited period, the Quattro will compensate for power inssufficient power from the generator, dock or grid with battery power. When the load decreases, the available energy is used to recharge the battery (available on L1 enmis only).

Two AC inputs and two AC outputs

The Quattro can be connected to two independent AC sources, for example shore power. and a generator, or two generators. The Quattro-II will automatically connect to the active source.

The main output has uninterrupted functionality. The Quattro supports powering connected 120V loads in the event of a grid outage or when shore/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without interruption. The transfer time of the L2 output is longer: around 40 milliseconds.

The second output (auxiliarye) is active only when alternating current is available on the Quattro input. Loads that should not discharge the battery can be connected to this output.

Virtually unlimited power thanks to parallel and three-phase operation

Up to 6 Quattros can work in parallel to achieve higher output power. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase configurations, L2 is disabled on all units.

On-site system configuration, monitoring and control

Parameters can be changed in one wink. minutes with VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface required). Several monitoring and control options are available: Cerbo GX, Color Control GX, portable computertable, computer, Bluetooth (with optional VE.Bus smart dongle), battery monitor and multiple digital control panel.

Remote configuration and monitoring

Install a Cerbo GX or another GX product to connect to the Internet. Operational data can be stored and displayed free of charge on our VRM (Victron Remote Management) website. Once connected to the Internet, systems can be accessed remotely and settings can be changed.

Specifications:

PowerControl & PowerAssist: Yes (on L1 input)
Transfer switch: 50 A
Maximum AC input current: 50A (each branch)

Inverter Specifications:

DC Input Voltage Range: 19-33V
Mode Output Inverter Mode: Output Voltage: 120 VAC ± 2% / Frequency: 60 Hz ± 0.1% (1)
Cont. Output power at 25°C: 3000 VA
Cont. Output power at 25°C: 2400 W
Cont. Output power at 40°C: 2200 W
Cont. Output power at 65°C: 1700 W
Maximum apparent supply power: 2500 VA
Peak power: 5500 W
Efficiency maximum: 94%
No-load power: 11 W
No-load power in AES mode: 8 W
No-load power in search mode: 4W

Charger Specifications:

AC Input: Split Phase: 180-280 Vac 45 - 65 Hz / Single Phase: 90-140 Vac 45 - 65 Hz
Charging voltage "Absorption": 28.8 V
Charging voltage "Floating": 27.6 V
Storage mode: 26.4 V
Maximum BaBattery charging current: 70 A
Battery temperature sensor: Yes

General specifications:

Auxiliary Output: 50 A (each branch)
External AC current sensor (optional) : 100A
Programmable relay: yes
Protection: a – g
VE.Bus communication port: for parallel and three-phase operation, remote monitoring and system integration
Com. Port: Yes, 2x
Remote On/Off: Yes
Operating Temperature Range: -40 to +65°C (-40 -150°F) Power Assisted Cooling fan
Humidity (non-condensing): max. 95%

Housing specifications:

Material and color: steel, blue RAL 5012
Protection category: IP22
Battery-Connection: 2 M8 bolts
120/240 V AC-Connection: Screw terminals 21 mm² (4 AWG)
Weight: 22.5 kg / (50lb)
Dimensions (hxwxd): 579 x 319 x 168 mm / (23 x 13 x 7 inches)

Standards:

Safety: EN-IEC 60335-1, EN-IEC 60335-2-29
Emission, immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1,IEC 61000-6-2, IEC 61000-6-3
Adjustable at 50 Hz
Protection key: output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 120 VAC on inverter output, input voltage ripple too high
Non-linear load, crest factor 3:1.
High to 75 degrees F / 25 degrees C ambient temperature
Turns off when no external AC source is available.
Programmable relay that can for example be set for a general alarm or direct current under voltage or generator set start/stop function: AC rating: 120 V AC / 4 A / DC rating: 4 A up to 35 V DC, 1 A up to 60V DC
Used, for example, to communicate with a lithium battery BMS

Please contact your dealer for any return, repair issues or support related to this product.

PRODUCT ID: 100131
SKU: NVN-100131
CSKU: CWR-100131
REWRITTEN: 111242-victron-quattro-ii-24-3000-70-50-50
MPN: QUA242305130
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON QUATTRO-II 24/3000 70-50 /50 2X 120 V
NAME_EX:
PTITLE: Victron Quattro-II - 24 /3000 - 70-50/50 - 2X 120V
TYPE: Electric | Charger/Inverter Combos
SELLER: Victron Energy
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Victron Quattro-II - 24/3000 - 70-50/50 - 2X 120V Product description

Quattro-II - 24/3000 - 70-50/50 - 2X 120V

Similar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combination inverter and charger specifically designed for standard North American 50A 120/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source.

120/240 V input and output, or 120 V input and output (always 120 V output in inverter mode )

The inverter/charger connects to neutral and the preferred input line (L1). The energy necessary for charging the batteries will therefore be drawn from L1.

The Quattro switches to operation aith inverter when there is no mains power. This is available. The inverter output is 120V single phase. In reverse mode, the Quattro connects the two output lines (L1 and L2) together to provide 120 VAC to loads on either line.

Any 240 V load will therefore be powered only when the Quattro is powered by a split phase. AC source. This prevents heavy loads such as water heaters or 240V air conditioners from draining the battery.

PowerControl and PowerAssist - Increase the capacity of the grid or a generator

PowerAssist brings the principle of PowerControl into another dimension. . Where peak power is notoften required that for a limited period, the Quattro will compensate for insufficient power from the generator, shore or grid with power from the battery. When the load decreases, the available energy is used to recharge the battery (available on the L1 input only).

Two AC inputs and two AC outputs

The Quattro can be connected to two independent AC sources, for example shore power and a generator, or two generators. The Quattro-II will automatically connect to the active source.

The main output has uninterrupted functionality. The Quattro supports powering connected 120V loads in the event of a grid outage or when shore/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without interruption. Transfer timeof output L2 is longer: approximately 40 milliseconds.

The second (auxiliary) output is active only when alternating current is available on the Quattro input. Loads that should not discharge the battery can be connected to this output.

Virtually unlimited power thanks to parallel and three-phase modes.Simple operation

Up to 'to 6 Quattro can operate in parallel to achieve higher power output. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase configurations, L2 is disabled on all units.

On-site system configuration, monitoring and control

Parameters can be changed in one wink. minutes with VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface required). MoreSeveral monitoring and control options are available: Cerbo GX, Color Control GX, laptop, computer, Bluetooth (with optional VE.Bus smart dongle), battery monitor and multiple digital control panel.

Remote Configuration and Monitoring

Install a Cerbo GX or other GX product to connect to the Internet. Operational data can be stored and displayed free of charge on our VRM (Victron Remote Management) website. When connected to the Internet, systems can be accessed remotely telematically, and settings can be changed.

Specifications:

PowerControl & PowerAssist: Yes (on L1 input)
Transfer switch: 50 A
Maximum AC input current: 50 A (each branch)

Inverter specifications:

DC input voltage range: 19-33V
Reverse mode outputeur: Output voltage: 120 VAC ± 2% / Frequency: 60 Hz ± 0.1% (1)
Continued Output power at 25°C: 3000 VA
Cont. Output power at 25°C: 2400 W
Cont. Output power at 40°C: 2200 W
Cont. Output power at 65°C: 1700 W
Maximum apparent supply power: 2500 VA
Peak power: 5500 W
Efficiency maximum: 94%
No-load power: 11 W
No-load power in AES mode: 8 W
No-load power in search mode: 4W

Charger Specifications:

AC Input: Split Phase: 180-280 Vac 45 - 65 Hz / Single Phase: 90-140 Vac 45 - 65 Hz
Charging voltage "Absorption": 28.8 V
Charged "Floating" voltage: 27.6 V
Storage mode: 26.4 V
Maximum battery charging current: 70 A
Battery temperature sensor: yes

General specificationsales:

Auxiliary output: 50A (each branch)
External AC current sensor (optional): 100A
Programmable relay: Yes
Protection: a – g
VE.Bus communication port: For parallel and three-phase operation, monitoring and remote system integration
Com for general purpose. Port: Yes, 2x
Remote On/Off: Yes
Operating Temperature Range: -40 to +65°C (-40 -150°F) Power Assisted Cooling fan
Humidity (non-condensing): max. 95%

Housing specifications:

Material and color: steel, blue RAL 5012
Protection category: IP22
Battery-Connection: 2 M8 bolts
120/240 V AC-Connection: Screw terminals 21 mm² (4 AWG)
Weight: 22.5 kg / (50lb)
Dimensions (hxwxd): 579 x 319 x 168 mm / (23 x 13 x7 inches)

Standards:

Safety: EN-IEC 60335-1, EN-IEC 60335-2-29
Emission, immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 , IEC 61000-6-1, IEC 61000-6 -2, IEC 61000-6-3
Can be adjusted to 50 Hz
Protection key: output short circuit , overload, battery voltage too high, battery voltage too low, temperature too high high, 120V AC on inverter output, input voltage ripple too high
Non-linear load , crest factor 3:1.
Ambient temperature up to 75 degrees F / 25 degrees C
Turns off when no external AC source is available.
li>
Programmable relay which can for example be set for general alarm or DC undervoltage or generator set start/stop function: AC rating: 120V AC / 4A / DC: 4A up to 35dc, 1A up to 60Vdc
Use, for example, to communicate with a lithium battery BMS

Please contact your dealer forr any return, repair or support issues related to this product.

Save $230 on the purchase of Victron Quattro-II - 24/3000 - 70-50/50 - 2X 120V for only $1,308 from NVN Marine! Free same day delivery before 3 p.m. Victron Quattro-II - 24/3000 - 70-50/50 - 2X 120V Technical specifications

Type:	Electric \| Charger/Inverter Combos
Supplier:	Victron Energy
Input voltage of the inverter:	13-33
Output voltage of the inverter:	120
User Guide:	Download PDF
Product Manual:	Download PDF
Product brochure:	Download PDF

Victron Quattro-II - 24/3000 - 70 -50/50 - 2X 120V UserAvisVictron Quattro-II - 24/3000 - 70-50/50 - 2X 120V Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here .