Xanigo Marine Dock and Deck Cleaner 1 Gallon Bestsellers

Dock & Deck Cleaner - 1 Gallon

Keep your dock and deck looking great while reducing harmful chemical runoff!

>The basic structure of Xanigo The Marine Dock & Deck Cleaner formula is made from plants, which allows it to have an organic content of 94%, certified by the USDA. This uses next-generation renewable biosurfactant technology, is considered easily biodegradable and is high performance and very effective. Does not contain: palm oil, 1, 4-dioxane, formaldehyde, proposition 65 chemicals, sulfates, sodium hydroxide, glycol ethers, phosphates, phthalates, parabens and ammonia

Instructions for Use: For docks and decks, Xanigo Marine recommends a dilution rate of 1:5 to 1:20 to allow for adequate cleaning. 1 gallon of Dock and Deck Cleaner for 5 to 20 gallons of water, depending on usagevail. This dilution rate will provide effective cleaning power for composites, wood and concrete.

Use a suitable deck and dock brush with a minimum of 2 m2" bristles. Bristle stiffness should be tested on the dock that users are trying to clean to determine which is most effective.

For stubborn stains like blood, embedded bird drops or oils, pour full strength into one. spray bottle and spray the stains before scrubbing After scrubbing the deck or dock, rinse with fresh water

Specifications:

Bottle Size: 1 Gallon

The Complete Process for Treating and Preventing Mildew on Vinyl Boat Seats

STEP 1: Eliminate mold with Xanigo Marine Mold Stain Remover

Xanigo Marin Mold Stain Remover is a very effective wayto eliminate mold. harsh chemical, it should only be used once to kill the mold, then the sealant should be applied to prevent the mold from coming back. Generously apply mold stain remover to the seats. Let it sit for 60-90 seconds, but. do not let it dry. It may be necessary to apply additional solution: keep it damp. Swirl in circular motions with a brush to remove mold from pores. Rinse thoroughly with clean water.

STEP 2: Neutralize the nail polish remover

After rinsing the nail polish remover with fresh water, it is important to make sure that the remnants of the solvent are neutralized so as not to dry out the vinyl or the seams by impact. Spray the waterless cleaner on the seats and wipe with a microfiber cloth to neutralize the chemicals in the remover.

STEP 3: Prepel mold with Xanigo Marine

Anti-Mildew Product With just one application, a boat will be protected against mold for up to 90 days. The preventative creates a covalent bond with the surface to which it is applied. Users can apply it to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, slips, patio furniture and other high humidity areas.

Spray Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe.

STEP 4: Maintain seats with Xanigo Marine Waterless Cleaner

Keep it Clean boat between mold prevention applications without using it. harsh chemicals or wasted water. Spray the waterless cleaner on the seats, leave-rest it for 15 to 20 seconds and wipe it with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave it smelling refreshing without affecting the protective layer created by the anti-mold.

It's also a great way to quickly make a gelcoat!

p>

PRODUCT ID: 104319
SKU: NVN-104319
CSKU: CWR-104319
REWRITE: 115430-xanigo-marine -dock-deck-cleaner
MPN: XMDDC1G
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: XANIGO DOCK & DECK CLEANER - 1 GAL
NAME_EX:
PTITLE: Cleaning
SELLER: br>TitleGoogle:

Gtags:

GSpecs:

Xanigo Marine Dock and Deck Cleaner - 1 Gallon Product Description

Dock and Deck Cleaner - 1 Gallon

Keep dock and deck looking good while reducing the runoff of harmful chemicals!

The basic structure of the Xanigo Marine Dock & Deck Cleaner formula is made from plants, allowing it to have 94% certified bio-content USDA. This uses next-generation renewable biosurfactant technology, is considered easily biodegradable and is high performance and very effective. Does not contain: palm oil, 1, 4-dioxane, formaldehyde, proposition 65 chemicals, sulfates, sodium hydroxide, glycol ethers, phosphates, phthalates, parabens and ammonia

Instructions for Use: For docks and decks, Xanigo Marine recommends a dilution rate of 1:5 to 1:20 to allow for adequate cleaning. 1gallon of Dock and Deck Cleaner for 5 to 20 gallons of water, depending on the job. This dilution rate will provide effective cleaning power for composites, wood and concrete

Use a suitable deck and dock brush with bristles of at least 2". Bristle stiffness should be tested on the dock that users are trying to clean to determine which is most effective

For stubborn stains like blood, embedded bird drops or oils/greases, pour the concentrated product into a spray bottle. and spray the stains before scrubbing After scrubbing the deck or dock, rinse with fresh water

Specifications:

Bottle Size: 1 Gallon

The Complete Process for Treating and Preventing Mildew on Vinyl Boat Seats

STEP 1: Eliminate mold with Xanigo Marine Mold Stain Remover

DetailXanigo Marin mold singing is a very effective way to eliminate mold. Being a harsh chemical, it should only be used once to kill mold and then the anti-mold product should be applied to prevent the mold from returning. . Generously apply Mo.LD Stain and Mold Remover to the seats. Let it sit for 60-90 seconds, but don't let it dry out. An additional solution may need to be applied: keep it moist. Swirl in circular motions with a brush to remove mold from pores. Rinse thoroughly with clean water.

STEP 2: Neutralize the nail polish remover

STEP 3: Prevent mold with Xanigo Marine Anti-Mold

With just one application, a boat will be protected against mold for up to 90 days. The preventative creates a covalent bond with the surface to which it is applied. Users can apply it to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, slips, patio furniture and other high humidity areas.

Spray the anti-mold product onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe.

STEP 4: Maintain seats with Xanigo Marine Waterless Cleaner

Keep it Clean boat between mold prevention applications without using it. harsh chemicals or wasted water.Spray the waterless cleaner on the seats, let it sit for 15 to 20 seconds and wipe it with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave it smelling refreshing without affecting the protective layer created by the anti-mold.

It's also a great way to quickly make a gelcoat!

p>

Save $2 when you purchase Xanigo Marine Dock & Deck Cleaner - 1 gallonfor only $49 from NVN Marine! Same day dispatch before 3 p.m. Xanigo Marine Dock & Deck Cleaner - 1 Gallon Technical Specifications

Type:	Boat Layout \| Cleaning
Seller:	Xanigo Marine

Xanigo Marine Dock & Deck Cleaner - 1 Gallon User ReviewsXanigo Marine Dock & Deck Cleaner - 1 Gallon Shipping & Returns