Xantrex FREEDOM EX 4000 - Inverter/Charger 4000W 80A 120V/48VDC Electrical

The new FREEDOM EX 4000 is a truly unique sine wave power solution featuring a powerful 48V DC, 4000W inverter (8000W> 5s surge), 80Amp battery charger 48 V DC, a 50 Amp transfer relay and a 48 V. Volt DC to 12 Volt DC, 45 Amp converter in a box. Designed for mobile applications using 48V DC battery systems, the FREEDOM EX 4000 is designed to operate as a standalone AC and DC power solution or to supplement an existing generator to create a hybrid system. The built-in Automatic Generator Start (AGS) module allows the FREEDOM EX4000 to start a generator at configurable low battery voltage settings to charge the batteries and produce the additional power needed to support a primarily generator-powered electrical system. The FREEDOM EX 4000 features the most widely used communication protocolss: RV-C (RV), J1939 (Truck) and NMEA 2000 (Marine), allowing it to be used in virtually any application requiring integration with MFPs and third-party software.

Xantrex 820408041 Attributes

Output voltage: 120 V AC
Input voltage: 12 V DC
Continuous output power (W): 4000 W
Maximum output power (W): 8,000 watts
Rated current: 33 amps
Length (IN): 17.1 inches
Width (IN): 14 inches
Height (IN): 8.1 inches
Remote on/off capable: Yes
With USB port: Yes
With Volt/Watt Meter: No
With short circuit: No
With reverse battery protection: No
With thermal protection: Yes
With battery cables: No
With integrated charger: Yes
With fuse: No

Xantrex 820408041 Features and Benefits

Voltage converter; 48V outputDC to 12V DC, simplifies installation, fewer components, fewer cables, reduced installation time.
Power factor correction, temperature compensation, power sharing, battery equalization and ability to configure charging profile and stages. Set load output to desired amps
Built-in 50 amp transfer relay
Extended surge rating reaches 2 times continuous power for 5 seconds or more for loads motor power
True sine wave AC power for operating sensors and motors Loads
Ignition control function to turn the inverter on and off via a 12 volt signal DC and to minimize battery drain by turning off the inverter when the ignition key is off
Stacking support battery Up to six units
Highly configurable charger specially designed for lithium-ion batteries
3-Year Limited Warranty The FREEDOM EX 4000 is a truly unique true sine wave power solution containing a powerful 48V DC, 4000W (8000W [5s]), 80A inverter. 48VDC Battery Charger, Transfer Relay 50A and 48VDC to 12VDC, 45A converter in one package. Designed for mobile applications using 48V DC battery systems, the FREEDOM EX 4000 is designed to operate as a standard AC and DC power solution or supplement an existing generator to create a hybrid system. The FREEDOM EX 4000 features the most widely used communications protocols – RV-C (RV), allowing it to be used in virtually any application requiring integration with MFPs and third-party software.
Features:
- Stack up to 3 units in parallel; until2 units in series
- 48 V DC to 12 V DC converter output
- Highly configurable charger specifically designed for lithium-ion batteries
- Transfer relay Built-in 50A
- Extended surge rating to 2x continuous power for 5 seconds
- True sine wave AC power
- Ignition control function for turn the inverter on/off via 12V DC signal
- li>
- Easily configurable settings to charge any lithium-ion battery
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 87991
SKU: NVN-87991
CSKU: CWR-87991
REWRITE : 99102-xantrex-freedom-ex-4000-4000w-inverter-charger
MPN: 820-4080-41
UPC: 715535906832
ASIN:
WSKU: XAN820408041
SSKU:
KSKU: X16820408041
GSKU:
MSKU:
LSKU:
NAME: Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC
NAME_EX: 120V/48VDC
TYPE: Electric | Charger/Inverter Combos
SELLER: Xantrex
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Xantrex Freedom true (2000W/80A)

Gtags:

GSpecs:

Xantrex FREEDOM EX 4000 - 4000W 80A 120V/48V DC Inverter/Charger Product Description
The new FREEDOM EX 4000 is a truly unique true sine wave power solution containing a powerful 48V DC inverter, 4,000 watts (8,000 watts> 5 sec surge), 80 amp 48 volt DC battery charger, 50 amp transfer relay and 48 volt DC to 12 volt DC, 45 amp converter in one box. Designed for mobile applications using 48V DC battery systems, the FREEDOM EX 4000 is designed to operate as a standalone AC and DC power solution or to supplement an existing generator to create a hybrid system. The built-in Automatic Generator Start (AGS) module allows the FREEDOM EX4000 to start a generator at configurable low battery voltage settings to charge the batteries and produce the additional power needed to support a primarily generator-powered electrical system.The FREEDOM EX 4000 features the most widely used communications protocols – RV-C (RV), J1939 (Truck) and NMEA 2000 (Marine), allowing it to be used in virtually any application requiring integration with MFPs and third party software. li>Input voltage: 12V DC
Continuous output power (W): 4 000 watts
Maximum output power (W): 8000 watts
Amps Rating : 33 A
Length (IN): 17.1 inches
Width (IN): 14 inches
Height (IN): 8.1 inches
Remote on/off capable: Yes
With USB port: Yes
With youltmeter/wattmeter: No
With short circuit: No
With reverse battery protection: No
With thermal protection: Yes
With battery cables: No
With integrated charger: Yes
Fused: No

Xantrex 820408041 Features and Benefits

Voltage Converter ; 48V DC to 12V DC output, simplifies installation, fewer components, fewer cables, reduced installation time.
Power factor correction, temperature compensation, power sharing, battery equalization and ability to configure charging profile and stages. Set load output to desired amps.
Built-in 50 amp transfer relay
Extended surge rating reaches 2 timess power continues for 5 seconds or more for motor loads
True sine wave AC power for operation of sensitive loads and motor.
Ignition control function to turn the inverter on and off via a 12 volt DC signal and to minimize battery drain by turning the inverter off when the ignition key is turned. Disabled
Stackable stacking rack for up to six units
Highly configurable charger designed specifically for lithium-ion batteries
3-year limited warranty
li>

FREEDOM EX 4000 - 4000W 80A 120V/48V DC Inverter/Charger

The FREEDOM EX 4000 is a Truly unique true sine wave power solution containing a powerful 48V DC, 4000W (8000W [5s]) inverter, 80A 48VDC battery. charger, 50A transfer relay and 48VDC to 12VDC, 45A converter in one box. Designed for applicationsMobile applications using 48V DC battery systems, the FREEDOM EX 4000 is designed to operate as a stand-alone AC and DC power solution or to supplement an existing generator to create a hybrid system. The FREEDOM EX 4000 features the most widely used communications protocols – RV-C (RV), allowing it to be used in virtually any application requiring integration with MFPs and third-party software.

Features:

Stack up to 3 units in parallel; up to 2 units in series
48VDC to 12VDC converter output
Highly configurable charger specifically designed for lithium-ion batteries
50A transfer relay built-in
Extended surge rating to 2x continuous power for 5 seconds
True sine wave AC power supply
Ignition control function to turn on/ turn off the inverter via a 12 V DC signal
Easily configurable settings to charge any lithium-ion battery

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Frequently Asked Questions (FAQ) about Xantrex FREEDOM EX 4000 - 4000 Inverter/Charger W 80A 120V/48V DC. what is Xantrex?
How to describe the Xantrex FREEDOM EX 4000 - Inverter/Charger 4000W 80A 120V/48VDC?
Who is Xantrex? Xantrex Technology Inc. is a global leader in advanced power electronics. Our enabling technology converts raw electrical energy from any source - central utility, backup, distributed or renewable power generation - into the high-quality electricity required by today's electronic and electrical equipment . Knowledge and experience of Xantrex technologiesin advanced power electronics help accelerate the commercialization of emerging power systems and solutions. How to describe the Xantrex FREEDOM EX 4000 - 4000W 80A 120V/48V DC Inverter/Charger? "

Xantrex Freedom EX 4000 Inverter/Charger with 48V DC to 12V DC Converter

Model: 820-4080-41

Stack up to 3 units in parallel; up to 2 units in series

48V DC to 12V DC converter output

Specially configurable charger designed for lithium-ion batteries

Built-in 50A transfer relay

Extended surge rating up to 2x continuous power for 5 seconds

Power True sine wave AC

Ignition control function to turn on/off the inverter via 12V DC signal

The new FREEDOM EX 4000 is a truly unique sine wave power solution, containing a powerful48V DC, 4000W (8000W [5s]), 80A 48VDC battery charger, 50A transfer relay and 48VDC to 12VDC, 45A converter in one package. Designed for mobile applications using 48V DC battery systems, the FREEDOM EX 4000 is designed to operate as a standalone AC and DC power solution or to supplement an existing generator to create a hybrid system. The FREEDOM EX 4000 features the most widely used communications protocols: RV-C (RV), allowing it to be used in virtually any application requiring integration with MFPs and third-party software.

Specifications

ELECTRICAL SPECIFICATIONS - INVERTER
AC Output Operating Voltage Options	105 - 130 VAC
Continuous Output Power	Continuous Power 4000Wat 40 C True Sine Wave (TSW) at 120 V AC
Continuous AC Output Current	33A
SurgePower	8000W (5 sec)
Frequency	60 Hz
ELECTRICAL SPECIFICATIONS - BATTERY CHARGER
Rated DC output voltage	48 V DC
Charger voltage range	40 - 64 VDC
Maximum DC output current (user configurable up to 5 A)	80 A
Supported battery types	Flooded, gel, AGM, lithium-ion, custom
ELECTRICAL SPECIFICATIONS - PASS-THROUGH
AC input voltage :
Single phase (L1 - N and L2 - N)	80 - 138 Vac
Divided phase* (L1 - L2)	160 - 276 Vac
Frequency (input/output)	60 Hz
Continuous alternating current (input/output)	40A
ELECTRICAL SPECIFICATIONS - 12 VDC POWER SUPPLY
Nominal DC output voltage (fully regulated)	13.5 VDC
Maximum DC output current	45 continuous ADC (at 77 F (25 C) ambient)
Typical application* Power supply	12 VDC loads
ELECTRICAL SPECIFICATIONS - COMMUNICATIONS SUPPORTED
Recreational Vehicles (RV)	RV-C Protocol
Trucking vehicles (future offer)	Protocol J-1939
Marine vessels (future offering)	NMEA-2000 Protocol
GENERAL SPECIFICATIONS
Operating temperature range	14 to 140 F (-10 to 60 C), with output derated above 104 F (40 C)
Storage temperature range	-40 to 158 F (-40 to 70 C)
Operating humidity range	5 to 95% relative humidity, non-condensing
Transfer relay AC current rating	50 A (40 A continuous)
L x W x H	17.1 inches (434 mm) x 14 inches (354 mm) x 8.1 inches (205 mm)
Net weight	79.4 lb (36.0 kg)

What's in the box:

Freedom EX 4000

Installation guide

pair of ½"" rings

pair of ¾"" rings

a network termination

The FREEDOM EX 4000 is a powerful true sine wave power solution that packs a massive 4000W inverter(8000 W [5 sec]), an 80 Amp 48 V DC battery charger, a 50 A transfer relay and a 48 V DC to 12 V DC.
This inverter/charger is the solution ideal for powering your sensitive electronic devices and appliances in areas where electrical networks are unstable or where you are subject to frequent power outages.

The FREEDOM EX The 4000 is featuring a powerful 48V DC, 4000W (8000W [5s]) inverter capable of powering your entire home or office.
The FREEDOM EX 40The 80A battery charger 2000s is capable of charging a 48V DC battery in just 2 hours.
The 50A transfer relay allows for easy transfer of power between the inverter and your batteries, reducing voltage on the inverter.
li>

The FREEDOM EX 4000 is a true sine wave power solution that can be used to power anything from a small business in a neighborhood
The inverter has 4000W of continuous power and 8000W of maximum power for 5 seconds, making it easy to handle the most demanding tasks.
The charger The battery pack is designed to charge any type of 48V DC battery and has a maximum charge current of 80A and a maximum transfer current of 50A.

Save $903 when you purchase the Xantrex FREEDOM EX 4000 Inverter/Charger - 4000W 80A 120V/48V DC for only $2,489from NVN Marine! Free same day delivery before 3 p.m. Xantrex FREEDOM EX 4000 - Inverter/Charger 4000W 80A 120V/48VDC Technical specifications

Type:	Electric \| Charger/Inverter Combos
Vendor:	Xantrex
Weight:	86.0 lbs
User Guide:	Download PDF
Manualproduct:	Download PDF
Product installation:	Download PDF

Xantrex FREEDOM EX 4000 - 4000W 80A 120V/48V DC Inverter/Charger User Reviews 120V/48VDC Shipping & Returns

Shipping Weight:	86.0 lbs
Box sizes:	12.00 (h) x 16.00 (w) x 21.00 (w)
Cubic Feet:	4032.0
Oversized Item:	Yes

For a detailed shipping policy, please see our shipping policy and you can find our return and return policy refund here.