Xantrex Freedom XC PRO Marine 3000W Inverter/Charger - 12V Electrical
The Freedom XC Pro Marine Inverter/Charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution on the market today. It supports seamless integration with third-party monitoring and control systems. It also has a 100A/150A battery charger and offers all the configurable features of the Freedom XC Series Inverter/Charger in a compact, lightweight package. It produces its full power in reverse or charge mode from -4 to 104 degrees F for operation in all climate temperatures. Extended surge rating allows compressor loads such as an air conditioner or refrigerator to start reliably.
Xantrex 8183015 Attributes- Output Voltage: 120V AC
- Input Voltage: 12 Volts DC
- Continuous Output Power (W): 3,000 Watts
- Maximum Output Power (W): 6,000 Watts
- IntRated current: 25 amps
- Efficiency: 84 to 91 percent
- Length (IN): 15.4 inches
- Width (IN): 10.8 inches
- Height (IN): 4.9 Inch
- Remo Power on/off compatible: Yes
- With USB port: No
- With Voltmeter/Watt Meter: Yes
- With thermal protection: Yes
- A true sine wave inverter with a lithium-ion battery charger and transfer switch integrated in a compact, lightweight form factor
- Configure and monitor system performance Via the Bluetooth app available on the optional Bluetooth remote panel
- Seamless integration with the NMEA 2000 Micro-C connector
- Extended surge rating: surges up to 2x continuous power for 5 seconds for motor loads
- True sine wave AC power: for the operation of sensitive loads and moteurs
- Ignition Control: Function to turn on/off the inverter via 12V DC signal and minimize battery drain by turning off the inverter When the ignition key is off
- Wide input range of 10 to 18 VDC: ensures inverter operation on high voltage alternators found on many new vehicle chassis
- Programmable AC Undervoltage Shutdown (85 to 110 VAC): Ideal feature for operating under low shore power or generator input
- Integrated 50 Amp AC Transfer Relay: Detects the presence of power Outdoor AC and transfers the load from the inverter to the incoming power source
- 2 year limited warranty
- Guide Freedom /li>
- 976-0367-01-01_Rev-E (Freedom li>
- 976-0422 -01-01_Rev-A(NMEA2000 PGN List for FXCC)_ENG.pdf
- 976-0422-01-01_Rev- A(NMEA2000 PGN List for FXCC)_ENG.pdf
- FXC Remote Compatibility Memo PRO.pdf
- 20210114_FREEDOMXCPROMARINE_Datasheet.pdf
- Device Installation Guide Freedom p>
A true sine wave inverter with integrated lithium-ion battery charger and transfer switch in a compact, lightweight package. Configure and monitor system performance via the Bluetooth application available on the optional Bluetooth remote panel (#808-0817-02). Seamless integration with NMEA Micro-C connector2000.
The Freedom XC PRO Marine Inverter/Charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution on the market today. It supports seamless integration with third-party monitoring and control systems. It also has a 100A (2000W model) / 150A (3000W model) battery charger and offers all the configurable features of the Freedom XC Series inverter/charger in a compact, lightweight package . It produces full power in inverter or charging mode from -4°F (-20°C) to 104°F (40°C) for operation in all climate temperatures. The extended surge rating allows compressor loads such as an air conditioner or refrigerator to start reliably.
Features:
- Extended Surge Rating: Surges at 2X continuous power for 5 seconds for mote loadsur
- True sine wave AC power: for operating sensitive loads and motor
- Ignition control: function to turn the inverter on/off via a signal of 12 V DC and to minimize battery drain by turning off the inverter when the ignition key is turned off
- Wide input range of 10 to 18 V DC: ensures the operation of the inverter on high voltage alternators found on many new vehicle chassis
- Programmable AC undervoltage shutdown (85-110 VAC): Ideal feature for operating under low power at shore or generator input
- Built-in 50A AC transfer relay (3KW model): detects when external utility power is present and transfers the load from the inverter to the incoming power source
Integrated charger features:
- Factor-corrected multi-stage chargingPower:Uses less power at dock when charging batteries. This frees up more usable AC power to operate electrical appliances and appliances and reduces the risk of tripping shore power circuit breakers.
- Programmable: Configurable temperature-compensated battery charging algorithm 3 steps for optimal charging of almost all battery types up to 18V
- Battery equalization: optimizes flooded battery life
- Drained battery charge down to 0 VDC
- Power sharing: Prioritizes AC loads by reducing load current and keeping total input current lower than circuit breaker setting
- Parameters easily configurable to charge any lithium-ion battery
Freedom XC PRO Marine 3000W Inverter/Charger - 12V True Sine Wave Inverter, Built-in Lithium-ion Battery Charger and Transfer Switch, Compact Structure, Light Weight ...
PRODUCT ID: 87990
SKU: NVN-87990
CSKU: CWR-87990
REWRITE: 99101-xantrex-freedom-xc-pro-marine-3000w-inverter-charger
MPN: 818-3015
UPC: 715535912635
ASIN: B097QBRD19
WSKU: XAN8183015
SSKU: XAN-818-3015
KSKU:
LSKU: 262-8183015
NAME: Xantrex Freedom XC PRO Marine 3000 W Inverter/Charger - 12 V
EX_NAME: XANTREX FREEDOM XC PRO Marine 3000 W Inverter/Charger - 12V
TYPE: Electric | Charger/Inverter Combos
SELLER: Xantrex
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER
Xantrex Freedom Xantrex Freedom XC PRO Marine 3000W Inverter/Charger - 12V Product DescriptionThe Freedom most flexible on the market today. It supports seamless integration with third-party monitoring and control systems. It also has a 100A/150A battery charger and offers all the configurable features of the Freedom XC Series Inverter/Charger in a compact, lightweight package. It produces its full power in reverse or charge mode from -4 to 104 degrees F for operation in all climate temperatures. The extended surge rating allows compressor loads such as an air conditioner or refrigerator to start reliably.
Xantrex 8183015 Attributes- Voltage Output: 120V AC
- Input Voltage : 12 V DC
- Continuous output power (W): 3000 watts
- Maximum output power (W): 6000 watts
- Rated amp: 25 amps
- Efficiency: 84 to 91 percent
- Length (IN): 15.4 inches
- Width (IN): 10.8 inches
- Height (IN): 4.9 inches
- Remote On/Off Capable: Yes
- With USB port: No
- With voltmeter/wattmeter: Yes
- With thermal protection: Yes
- A true sine wave inverter with an integrated lithium-ion battery charger and transfer switch in a compact, lightweight footprinti>
- Configure and monitor system performance via the Bluetooth app available on the optional Bluetooth remote panel
- Seamless integration with NMEA 2000 Micro-C connector
- Extension Surge rating: surges up to 2X continuous P Power for 5 seconds for motor loads
- True sine wave AC power: for operation of sensitive loads and motor
- Ignition Control: Function to turn on/off the inverter via 12V DC signal and To minimize battery drain by turning off the inverter when the ignition key is off
- Wide input range of 10 to 18 VDC: ensures inverter operation on high voltage alternators found on many new vehicle chassis
- Programmable AC undervoltage shutdown ( 85 to 110 VAC): Ideal feature for operating under low shore power or entGenerator Relay
- Built-in 50A AC transfer relay: detects the presence of external AC power and transfers the load from the inverter to the incoming power source
- 2 Year Limited Warranty
- Freedom X GFCI Device Installation Guide (975-0788-01 -01_Rev-A)_ENG.pdf
- 975-0799-01-01_Rev-D (Freedom XC PRO Owner's Guide)_ENG.pdf
- 976-0367-01-01_Rev-E (Remote Panel User Guide Freedom Xe)_ENG.pdf
- Freedom_XC_Warranty Terms and Conditions_NA.pdf
- 976-0422-01-01_Rev-A(NMEA2000 PGN List for FXCC)_ENG.pdf
- FXC PRO Remote Compatibility Memo.pdf
- 20210114_FREEDOMXCPROMARINE_Datasheet.pdf
- Freedom X GFCI Device Installation Guide (975-0788-01)-01_Rev-A)_ENG.pdf
Freedom XC PRO Marine 3000W Inverter/Charger - 12V
Un True sine wave inverter with an integrated lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via the Bluetooth application available on the optional Bluetooth remote panel (#808-0817-02). Seamless integration with NMEA 2000 Micro-C connector.
The Freedom XC PRO Marine Inverter/Charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC solution. electric on the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100A (2000W model) / 150A (3000W model) battery charger and offers all the configurable features of the Freedom XC Series Inverter/Charger in onecompact and lightweight body. It produces full power in inverter or charging mode from -4°F (-20°C) to 104°F (40°C) for operation in all climate temperatures. Extended surge rating allows compressor loads such as an air conditioner or refrigerator to start reliably.
Features:
- Extended Surge Rating: Increases up to 2x continuous power for 5 seconds for motor loads.
- True sine wave AC power: for operating sensitive loads and motor.
- li>
- Ignition Control: Function to turn the inverter on/off. via a 12V DC signal and to minimize battery drain by turning off the inverter when the ignition key is turned off.
- Wide input range of 10 to 18V DC: ensures the high voltage inverter operationvoltage alternators found on many vehicle chassisBrand New Batteries
- Programmable AC Undervoltage Shutdown (85-110 VAC): Ideal feature for operating under low shore power or generator input
- 50 Amp AC built-in Transfer Relay (3KW Model): Detects the presence of external utility power and transfers the load from the inverter to the incoming power source
Charger Features Built-in:
- Power factor corrected multi-stage charging: Uses less shore power when charging batteries. This frees up more usable AC power to operate electrical appliances and appliances and reduces the risk of tripping shore power circuit breakers.
- Programmable: Configurable temperature-compensated battery charging algorithm 3 steps for optimal charging of almost all battery types up to 18 V
- Battery equalization: optimizes battery lifeflooded battery life
- Drained battery charge down to 0 VDC
- Power sharing: Prioritizes AC loads by reducing charge current and maintaining the total input current less than the circuit breaker setting
- Easily configurable settings to charge any lithium-ion battery
Freedom XC PRO Marine 3000W Inverter/Charger - 12V True Sine Wave Inverter, Lithium-Ion Battery Charger and Power Switch integrated transfer, compact structure, light weight...
Xantrex Freedom XC PRO Marine inverter/charger 3,000 W - 12 V Related products />Xantrex Freedom X / XC Remote Panel with /25' Cable
GFCI Option Xantrex Freedom X
Xantrex Freedom XC PRO Marine 3000 W - 12 V Who is the Xantrex?
How to describe the Xantrex Freedom> How big is it?
How strong is the product?
What is Xantrex? Xantrex Technology Inc. is a global leader in advanced power electronics. Our enabling technology converts raw electrical energy from any source (central utility, backup power, distributed or renewable generation) into the high-quality electricity required by today's electronic and electrical equipment. Xantrex technologies' knowledge and experience in advanced power electronics helps acceleratere-marketing emerging power systems and solutions. How to describe the Xantrex Freedom XC PRO Marine 3000W – 12V Inverter/Charger? Freedom Freedom iOS and Android devices.
- A true sine wave inverter with charger built-in lithium-ion battery pack and transfer switch in a compact, lightweight package.
- Configure and monitorz system performance via the Bluetooth app available on iOS and Android devices.
- Charging current: 3000W (max)
- Battery: 12V/100Ah
- The Freedom and monitor system performance via the Bluetooth app available on iOS and Android devices.
- Built-in USB port for charging mobile devices or operating devices without shore power.
- A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight form factor.
- Configure and monitor system performance via Bluetooth app available on iOS devices and Android.
- Charging current: 3000W (max)
- Battery: 12V/100Ah
- The Xantrex Freedom XC Pro Marine 3000 is designed for boats and other applications marine.
- It has an extended surge rating, allowing it to handle surges of up to 2 times the continuous power.
- It also has a true surge sinusoidal. AC power, which is important for sensitive equipment like motors.
- And it includes an ignition control feature to automatically turn the inverter on and off.
- The Freedom XC PRO Marine 3000 is a perfect choice for boats and other marine applications.
- It has an extended surge of 2X continuous power for 5 seconds, which is more than enough to handle the engine loads of your boat.
- True sine wave AC power ensures sensitive loads and motor are safe from damage, while foIgnition control function ensures your inverter starts reliably every time.
Save $690 on the purchase of the Xantrex inverter Freedom XC PRO Marine 3000W /Charger - 12Vfor only $1,349 from NVN Marine! W - 12V Videos Xantrex Freedom inverter
Xantrex
45.0 lbs
Download PDF
| Shipping Weight: | 45.0 lbs |
|---|---|
| Box sizes: | 8.00 (h) x 8.00 (w) x 15.00 (w) |
| Cubic feet: | 960.0 |
For detailed shipping policy, please see our shipping policy and you can find our Return & Refund Policy here.
- Xantrex Freedom XC PRO Marine Inverter/Charger 2000 W - 12 V
- Xantrex Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12V
- Xantrex Freedom XC Pro 2000 Inverter/Charger - 2000W - 100A - 120V - 12V
- Xantrex Freedom XC 2000 True Sine Wave Inverter/Charger - 12VDC - 120VAC - 2000W/80A
- Xantrex Freedom XC 1000 True Sine Wave Inverter/Charger - 12VDC - 120VAC - 1000W/50A
- Xantrex Freedom X2000-12 2000W 230V True Sine Wave Inverter
- Xantrex Freedom X GFCI Option
