Actisense OPTO-4 isolated NMEA to RS232 adapter Marine Navigation & Instruments
The OPTO-4 provides a secure and inexpensive way to connect a NMEA 0183 system to a PC or other device with a standard 9-pin RS232 port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 uses OPTO insulation to protect the PC input and spike protection for the PC output, providing complete isolation from the PC's hardware. PC when connecting to a NMEA 0183 bus.
If two-way isolation is required, the Actisense USG-2 provides bi-directional isolation in the form of USB to RS422 (NMEA 0183).
p>The Actisense design incorporates an overmolded housing for excellent water quality. strength and a small footprint for installation in tight spaces.
The OPTO-4 is powered by host RS232 signals, including TX and the RTS and DTR handshake lines, which makes OPTO-4 suitable for most PC serial ports. .
In systems that cannotdo not provide power on the handshake lines, e.g. Serial devices with only Rx and Tx lines, DC power can be used.
OPTO-4 Isolated NMEA to RS232 adapter
Isolate one RS232 port ( PC) to protect against ground loops...
The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable that provides a secure method of connecting a system NMEA 0183 to a laptop or any device with a standard 9-pin RS232 port. The insulation protects the connected device, so that any potentially dangerous voltage on the NMEA 0183 bus does not damage the PC hardware, giving the user complete peace of mind.
The OPTO-4 is particularly suitable for "noisy" or commercial environments, as it provides a complete solution for system builders who require all components to be shielded. Like heis port powered (from the PC), the OPTO-4 is quick and hassle-free to install.
Actisense's unique design incorporates an over-molded housing for excellent water resistance and a Small footprint for easy installation in tight spaces.
Features:
- NMEA 0183 and RS232 compliant
- Full duplex communication (bidirectional)
- All baud rates up to 115,200 baud
- Overmolded housing with narrow profile for installation in tight spaces
- Protection against transients on the PC output line
- Opto-isolation ensuring 2000 volt protection on the PC input line
- Protection against reverse voltages on PC input line
- Current limited to protect against cable faults
- Port powered; is powered by the PC port
- Fully shielded for superior rejectionnoise ur
OPTO-4 isolates the NMEA to RS232 adapter to isolate the RS232 (PC) port to prevent ground loops. .. Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable that can provide...
PRODUCT ID: 51801
SKU: NVN-51801
CSKU: CWR-51801
br>REWRITE: 62912-actisense-opto-4-isolated-nmea-to-rs232-adapter
MPN: OPTO-4
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: OPTO-4
MSKU:
LSKU:
NAME: Actisense OPTO-4 Isolated NMEA to RS232 Adapter
NAME_EX: ACTISENSE OPTO-4 ISOLATED NMEA to RS232 ADAPTER
PTITLE: Actisense OPTO-4 isolated NMEA to RS232 adapter
TYPE: Navigation and marine instruments | NMEA cables and sensors
SUPPLIER: Actisense
ELECTRONICS> ELECTRONICS MARINE> Marine Chartplotters and GPS Actisense OPTO-4 Isolated to NMEA RS232 Adapter
Gtags:
| Digi | |
| Series |
GSpecs:
Actisense OPTO-4 Isolated NMEA to RS232 Adapter Product Description
The OPTO-4 provides a secure and inexpensive way to connect a NMEA 0183 system to a PC or other device with a standard 9-way RS232 port pins. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 uses OPTO insulation to protect the PC input and spike protection for the PC output, providing complete isolation from the PC's hardware. PC when connecting to a NMEA 0183 bus.
If two-way isolation is required, the Actisense USG-2 provides bi-directional isolation in the form of USB to RS422 (NMEA 0183).
p>The Actisense design incorporates an overmolded housing for excellent water quality. strength and a small footprint for installation in tight spaces.
The OPTO-4 is powered by host RS232 signals, including TX and the RTS and DTR handshake lines, which makes the OPTO-4 suitable formost PC serial ports. .
In systems that cannot provide power over the handshake lines, e.g. serial devices with only Rxet Tx, DC power can be used.
OPTO-4 Isolated NMEA to RS232 Adapter
Isolate one RS232 port (PC) to protect you from ground loops...
The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable that provides a secure method of connecting an NMEA 0183 system to a laptop or any device with a standard 9-pin RS232 port. The insulation protects the connected device, so that any potentially dangerous voltage on the NMEA 0183 bus does not damage the PC hardware, giving the user complete peace of mind.
The OPTO-4 is particularly suitable for "noisy" or commercial environments, as it provides a complete solution for system builders whorequire all components to be shielded. As it is port powered (from the PC), the OPTO-4 is quick and hassle-free to install.
Actisense's unique design incorporates an over-molded housing for excellent water resistance and a small footprint for easy installation in tight spaces.
Features:
- NMEA 0183 and RS232 compliant
- Full duplex communication (bidirectional)
- All rates up to 115200 Bauds
- Narrow profile overmolded housing for installation in restricted spaces
- Transient protection on the PC output line
- Opto-isolation providing 2,000 volts protection on the PC input line
- Reverse voltage protection on PC input line
- Current limited to protect against cable faults
- Port powered ; is powered by the PC port
- Fully blinded for superior noise rejection
OPTO-4 isolates the NMEA to RS232 adapter to isolate the RS232 (PC) port to prevent ground loops. .. Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable that can provide...
Frequently Asked Questions (FAQ) about Actisense OPTO Isolated NMEA to RS232 Adapter -4 Who is Actisense?
How to describe the Actisense OPTO-4 isolated NMEA to RS232 adapter?
What is the exterior color of the product?
In which country is this product manufactured?
What are the dimensions and weight of the Actisense OPTO-4 isolated NMEA to RS232 adapter?
What is the interface of product data?
What is the connector type of the product?
What is the length of the cable?
What is the connector type?Product communication method?
What are the manufacturer's notes on the Actisense OPTO-4 isolated NMEA to RS232 adapter?
Who is the Actisense? Actisense is dedicated to providing intelligent sensors and interfaces unmatched in quality, functionality and reliability. Actisense aims to be the installer's product of choice by making navigation safer with the most reliable boat electronic systems. Utilizing over 20 years of specialized experience in DSP software and hardware design in the field of smart sensors and underwater acoustics. Actisense is now a market leader in the manufacturing of intelligent marine electronics. How to describe the Actisense OPTO-4 isolated NMEA to RS232 adapter?
The OPTO-4 provides a secure and inexpensive way to connect a NMEA 0183 system to a PC or other device with a standard 9 pin RS232 portoches. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 uses OPTO insulation to protect the PC input and spike protection for the PC output, providing complete isolation from the PC's hardware. PC when connecting to a NMEA 0183 bus.
If two-way isolation is required, the Actisense USG-2 provides two-way isolation in the form of USB to RS422 (NMEA 0183).
The Actisense design incorporates an overmolded housing for excellent water resistance and a small footprint for installation in tight spaces.
The OPTO-4 is powered by the It hosts RS232 signals, including TX and RTS and DTR handshake lines, making the OPTO-4 suitable for most PC serial ports .
In systems that cannot power the handshaking lines, e.g. For serial devices with only Rx and Tx lines, a power supplyCC tation can be used.
What is the exterior color of the product? Black- In which country is this product made? ChinaWhat are the dimensions and weight of the Actisense OPTO-4 Isolated NMEA to RS232 Adapter? 5 (l) X 1 (h) X 4 (w) inches and the weight is: 0.23 lbs. What is the product data interface? NMEA 0183What is the connector type of the product? Bare wireHow long is the cable? 1.5 m (4.9')What is the product communication method? NMEA 0183/RS232What are the manufacturer's notes for the Actisense OPTO-4 Isolated NMEA to RS232 Adapter?
The OPTO-4 provides a secure and inexpensive way to connect a NMEA 0183 system to a PC or other device with a standard 9-pin RS232 port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 uses OPTO isolation to protect the PC input and spike protection for the PC output, providing complete isolationof the PC hardware when connecting to an NMEA 0183 bus.
If isolation in both directions is required, the Actisense USG-2 provides bidirectional isolation in USB to RS422 (NMEA 0183) form.
The Actisense design incorporates an over-molded housing for excellent water resistance and a small footprint for installation in tight spaces.
The OPTO-4 is powered by host RS232 signals, including TX and RTS and DTR handshake lines, making the OPTO-4 suitable for most PC serial ports.
In systems that cannot provide power over the handshake lines, e.g. serial devices with only Rx and Tx lines, DC power can be used.
Save $28when you purchase the Actisense OPTO-4 isolated NMEA to RS232Adapter for only $108from NVN Marine! Same day shippingwed before 3 p.m.Technical specifications of the Actisense OPTO-4 isolated NMEA to RS232 adapter
| Type: | Marine navigation and instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Actisense |
| Weight: | 0.25 lbs |
| Data interface: | NMEA 0183 |
| Product Manual: | Download PDF |
| Product Brochure: | Download PDF |
| Shipping Weight: | 0.25 lbs |
|---|---|
| Box sizes: | 2.00 (h) x 4.00 (w) x 5.00 (w) ) |
| Cubic feet: | 40.0 |
| USPS First Class: | Yes |
