Airmar B175C-20-H-10F - B175 High Chirp 1 kW 20° tilt 10-pin Furuno DT Marine Navigation & Instruments

1 kW

Airmar's low-profile, Chirp-ready transducer models are the perfect complement to small boats such as center consoles. The high frequency band provides a narrow beamwidth, excellent for locating fish clinging to wrecks, reefs and other structures. The high frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting on 130 to 210 kHz, the B175H has up to 80 kHz of total bandwidth in a single installation for superior shallow water performance and bottom detail.

Tilted Element transducers^™ have the element fixed at an angle of 20°, 12° or 0° inside the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to guarantee maximum returnecho urs to the transducer.

The B175H is available in three inclined element models:

Fixed version inclined at 20° for 16 24° hull
Fixed version inclined by 12° for hull angles of 8 to 15°
Fixed version inclined by 0° for hull angles of 0 to 7°

1 kW

Airmar's low-profile, Chirp-ready transducer models are the perfect addition to small boats such as center consoles. The high frequency band provides a narrow beamwidth, excellent for locating fish clinging to wrecks, reefs and other structures. The high frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting on 130 to 210 kHz, the B175H has up to 80 kHz of total bandwidth in a single installation for superior performance in shallow water ands details on the bottom.

Tilted Element^™ transducers have the element attached at an angle of 20°, 12° or 0° inside the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175H is available in three angled element designs:

Fixed version inclined at 20° for hull angles of 16 to 24°
Fixed version inclined at 12° for 8 to 15° hull grip angles
Fixed version inclined at 0° for hull grip angles from 0 to 7°

Detection of depth and temperature of the hull Fast response water
1 kW of power with a maximum depth of 304 m (1,000 ft)
High frequency: 130 to 210 kHz

Beam width from 10° to 6°

80 kHz bandwidth totale from a single transducer
High frequency provides superior shallow water performance and bottom detail and fish target separation
Thru-hull housing with Low profile provides good display resolution at high speeds when installed correctly
Recommended for stepped, planing or displacement hulls
Bronze housing for use in a fiberglass or wood hull
Also available in stainless steel housing (SS175H) for use in all hull materials
Patented Xducer ID Technology

PRODUCT ID: 3000547
SKU: NVN-3000547
CSKU: CWR-3000547
REWRITE: 3011658-airmar -b175c-20-h- 10f-b175-high-chirp-1kw-200
MPN: B175C-20-H-10F
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: B175C-20-H-10F
MSKU:
LSKU:
NAME: Airmar B175C-20-H-10F - B175 High Chirp, 1 kW,tilt 20°, Furuno 10 pin, DT
NAME_EX:
PTITLE: Airmar B175C-20-H-10F - B175 High Chirp, 1 kW, tilt 20°, Furuno 10 pin, DT
TYPE: Navigation maritime and Instruments | Transducers
SELLER: Airmar

Gtags:

GSpecs:

Airmar B175C-20-H-10F - B175 High Chirp, 1 kW, 20° tilt, Furuno 10 pin, DT Product description

1 kW

The low profile Airmar's Chirp-ready transducer models are the perfect addition to small boats such as center consoles. The high frequency band provides a narrow beamwidth, excellent for locating fish clinging to wrecks, reefs and other structures. The high frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting on 130 to 210 kHz, the B175H has up to 80 kHz of total bandwidth in a single installation for superior shallow water performance and bottom detail.

Tilted Element transducers^™ have the element fixed at an angle of 20°, 12° or 0° inside the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the pointdeath of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175H is available in three angled elements. NT models:

Fixed version inclined at 20° for hull angles from 16 to 24°
Fixed version inclined at 12° for hull angles from 8 to 15°
Fixed version inclined at 0° for hull angles of 0 to 7°

1 kW

Airmar's Les Low-profile, Chirp-ready transducer models are the perfect complement to smaller boats such as center consoles. The high frequency band provides a narrow beamwidth, excellent for locating fish clinging to wrecks, reefs and other structures. The high frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting on 130 to 210 kHz, the B175H has up to 80 kHz bandwidthof total bandwidth in a single installation for superior shallow water performance and bottom detail.

Tilted Element^™ transducers have the element fixed at an angle of 20°, 12° or 0° inside the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175H is available in three angled element models:

Version fixed inclined at 20° for 16 to 24 people. ° hull grip angles
Fixed version inclined by 12° for hull grip angles of 8 to 15°
Fixed version inclined by 0° for hull grip angles hull from 0 to 7°

Fast response depth and water temperature detection
1 kW of power with a maximum depth of 304 m (1,000')
High frequency: 130 to 210 kHz

10° to 6° beamwidth

80 kHz total bandwidth from of a transducer
High frequency provides superior shallow water performance, bottom detail and separation of fish and targets
Low profile thru-hull housing provides good display resolution at high speeds when installed correctly
Recommended for stepped, planing or displacement hulls
Bronze housing for use in a hull fiberglass or wood
Also availablecapable in stainless steel housing (SS175H) for use in all hull materials
Patented Xducer ID

^{Frequently asked questions (FAQ) about Airmar B175C-20-H-10F - B175 High Chirp, 1kW, 20° Tilt, Furuno 10-Pin, DT Who is the Airmar?
How to describe the Airmar B175C-20-H -10F - B175 High Chirp, 1kW, 20° tilt, Furuno 10 pin, DT?
Which mix and match cable is useful for this product?
What is the rated power of the product?
What are the the functions of the transducer of the product?
In which country is this product manufactured?
What is the frequency band of the product?
What is the Airmar B175C-20-H -10F - B175 High Chirp, 1 kW, 20° tilt, Furuno 10 pin, DT package dimensions and weight?
What is the sensor connector of the product?
How to mount or what is the style of fitting the Airmar B175C -20-H-10F - B175 High Chirp, 1 kW, 20° tilt, Furuno 10 pin, DT?
Is this product single frequency or doubley?
What is the tilt angle of the product?
What is the display connector of the product?
What is the common use location of the product?
What is the connector type of the product ?
What is the length of the cable?
What is the material of the housing?tier of the product?
What is the maximum depth of the product?
What is the dead height of the product range?
What is the hole size of the product?
What is the width of the high frequency beam of the product?
What is the high frequency level of the product?
This product has an inclined element?
What shell material is suitable for this product?
What is the usable shaft length of the product?
What is the maximum tilt angle of the product?
What is the maximum height of the product?
What are the manufacturer's notes regarding Airmar B175C-20-H-10F - B175 High Chirp, 1kW, 20° Tilt, Furuno 10-Pin, DT?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the pmost reactive on the market. Airmar prides itself on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar B175C-20-H-10F - B175 High Chirp, 1 kW, 20° Tilt, Furuno 10 pin, DT?}

^{1 kW}

^{Chirp-ready, low-profile}

^{Airmar transducer models are the perfect complement to small boats such as central consoles. . The high frequency band provides a narrow beamwidth, excellent for locating fish clinging to wrecks, reefs and other structures. The high frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting on 130 to 210 kHz, the B175H has a total bandwidth of up to 80 kHz in a single installation for superior shallow water performance and bottom detail.}

^{Electric transducersangled^™ have the element fixed at an angle of 20°, 12° or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.}

The B175H is available in three angled element designs:

Fixed version inclined at 20° for 16 to 24° hull grip angles
Fixed version inclined at 12° for hull grip angles from 8 to 15°
Version fixed inclined by 0° for hull grip angles of 0 to 7°

Which mix and match cable is useful for this product? Chirp 12 Pin

1 kW

Airmar to Low profile, Chirp ready, Transducer models are the perfect complement to small boats such as center consoles. The high frequency band provides a narrow beamwidth, excellent for locating fish that are holding near wrecks, reefs and. other structures. High frequency also shows astonishing target separation.s on baitfish and schools. Gamefish Transmitting on 130 to 210 kHz, the B175H has up to 80 kHz of total bandwidth in a single installation for superior shallow water performance and bottom detail.

Tilted Element^™ transducers have the element attached at an angle of 20°, 12° or 0° inside the housingg. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175H is available in three angled element designs: