Airmar B75C-0-L 0d Tilt Furuno 10 pin cable Airmar
Airmar B75C Angled Element 0° Low CHIRP Bronze Thru Hull with 10-Pin Furuno Mix-N-Match Cable
Model: B75C-0-L-10F- Fast response water depth and temperature sensor
- 35 kHz total bandwidth from a single transducer
Make Trust Airmar's new wideband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and resolution, so precise that it is possible to distinguish individual baitfish, fish- game and underwater structures. One transducer provides up to 80 kHz of total bandwidth in a single installation, saving customers time and money.
Sound waves will not present as imageclear from the background on the screen, but they will be very loud. deep areas where high-frequency sound waves cannot reach
Provides greater depth range, wider beamwidth, and ultimately more coverage under the boat
Chirp signal processing technology used with AIRMAR broadband, Chirp-enabled transducers provide more detail at greater depths and are less sensitive to noise
Ideal for operating at high boat speeds
p>Specifications
| CHIRP frequency | 40 kHz to 75 kHz |
| Beam width | 32° to 21° |
| Element tilt | 0° |
| Dead center | 0° to 7° |
| Maximum depth | 1200ft |
- B75C-0-L-MM
- MMC-10FL
Airmar B75C 0° Tilt Element Low CHIRP Bronze Thru-Shell with 10-Pin Furuno Mix-N-Match Cable
Model: B75C-0-L-10F- Fast response water depth and temperature sensor
- 35 kHz total bandwidth at from a single transducer
Rely on Airmar's new wideband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and resolution, so precise that it is possible to distinguish individual baitfish, fish- game and underwater structures. One transducer provides up to 80kHz of total bandwidth in a single installation, saving customers moneytime and money.
The sound waves will not present as clear an image of the background on the screen, but they will be very loud. deep areas where high frequency sound waves cannot reach
Provides greater depth range, wider beamwidth and ultimately greater coverage under the boat
Chirp signal processing technology used with AIRMAR broadband, Chirp-compatible transducers provide more detail at greater depths and are less sensitive to noise
Ideal for operating at high boat speeds
SpecificationsMaximum depth
| Frequency CHIRP | 40 kHz to 75 kHz |
| Beam width | 32° to 21° |
| Element skew | 0° |
| Deadrise | 0° to 7° |
| 1,200 feet |
What's in the box:
- B75C-0-L-MM
- MMC-10FL
Save $338 with the purchase of the Airmar B75C-0-L 0d Tilt Furuno 10- Pin Cable for only $392 from NVN Marine! Same day dispatch before 3 p.m. Airmar B75C-0-L 0d Up to Furuno 10 Pin Cable Technical Specifications
| Type: | Navigation & Marine Instruments | Transducers |
|---|---|
| Supplier: | Airmar |
| Weight: | 5.0 lbs |
| Shipping Weight: | 5.0 lbs |
|---|---|
| Box sizes: | (h) x (l) x (l) |
| Cubic feet: | 0 |
For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here .
- Airmar B75C-0-L - B75 High Flow Chirp Bare Wire DT
- Airmar B75C-0-HW 0d CHIRP High Tilt Wide Angle with Mix-n-Match Plug
- Airmar B75C-0-H-HB - B75 High Chirp 600 W 0° tilt Humminbird #9 DT
- Airmar B75C-0-H-BB - B75 High Chirp 600 W 0° tilt 8-pin Si-Tex DT
- Airmar B75C-0-H-21HB - B75 High Chirp 600 W 0° tilt Humminbird 21 pin DT
- Airmar B75C-0-H-12F - B75 High Chirp 600 W 0° tilt 12-pin Furuno DT
- Airmar B75C-0-H-10F - B75 High Chirp 600 W 0° tilt 10-pin Furuno DT
