Airmar DT812PV-235-N2 - 235kHz - Smart sensor passing through plastic shell - 12° tilt - NMEA 2000 - 6M cable Marine Navigation & Instruments
The DT800 uses Airmar's proven tilted element and broadband technologies in this Smart™ depth and temperature sensor. The DT800 is a retractable, low-profile through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar's Smart™ sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.
The ceramic is angled inside the housing, compensating for the dead state of the hull and directing the transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 is sold with a choice of caseRobust rs – made of plastic, bronze or stainless steel – to suit any type of vessel or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.
The DT800 is available in three models of inclined elements:
- Fixed version inclined at 20° for hull angles from 16° to 24°
- Fixed version inclined at 12° for hull angles from 8° to 15°
- Fixed version inclined at 0° for hull angles from 0° to 7°
DT812PV-235-N2 - 235kHz - Smart sensor through plastic hull - 12° tilt - NMEA 2000 - 6M cable
Airmar has taken its proven Tilted Element™ and high bandwidth technologies and has applied to its leading range of Smart™ sensors. The DT800 isa discreet, retractable thru-hull sensor that calculates precise depth and temperature data and sends it to any NMEA 0183 or NMEA 2000 display. The DT800 operates at a frequency of 235 kHz and can operate simultaneously with other onboard Airmar 50/200 kHz transducers without interference. Broadband ceramic provides depth readings up to 183 m (600'), as well as accurate shallow water readings down to 500 mm (1.6'). Available in fixed tilt of 0°, 12° or 20°, the DT800 is perfect for powerboat and sailboat applications. It comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile housings do not affect hull performance and will provide accurate readings at high speeds.
Airmar's Smart™ sensors incorporate microelectronics: the transd elementuctor and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All you need to receive depth and temperature data is a single cable to a compatible device or display. Because the ceramic is angled inside the housing, the transducer beam is aimed downward, resulting in strong bottom echo returns and accurate depth readings. Retractable housing with self-closing valve reduces water flow into the container when the transducer is removed for cleaning.
Smart™ Sensor Features
- Broadband ceramic available with 0°, 12° and 20° tilt options
- Enhanced depth performance
- Maximum depth range: 180 M (594')
- Minimum range 0.5 M (1.6')
- Ur faceethane offers better sensitivity
- Excellent high speed performance
- Fixed 12° tilt for 8° to 15° tilt
- li>
- NMEA 2000 output
- Power 100 W RMS
- Frequency: 235 kHz
- Cone: 12°
- All models have a depth and temperature
- 235 kHz eliminates interference with fishfinders
- Retractable insert facilitates maintenance
- Usable shaft length: 57 mm (2 .25")
- 6M (19.8") NMEA 2000 Devicenet cable and connector
- 51mm (2") housing
- Cap shutter included
- Fits maximum shell thicknesses of 54 millimeters (2 1/8")
- Fits minimum shell thicknesses of 6.3 mm (0.25")
DT812PV-235-N2-235kHz-Smart sensor passing through plastic shell-12° tilt-NMEA 2000-6M CableAirmar has adopted its proven tilted element and wideband technology and applied it...
PRODUCT ID: 88888
SKU: NVN-88888
CSKU: CWR-88888
REWRITE: 99999-airmar-dt812pv-235-n2-235khz-plastic-thru
MPN: DT812PV-235-N2
UPC: 801769002478
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: DT812PV-235-N2
MSKU:
LSKU:
NAME: Airmar DT812PV-235- N2 - 235 kHz - Smart sensor through plastic shell - 12° tilt - NMEA 2000 - 6M cable
NAME_EX: AIRMAR DT800 PLASTIC 12 DEGREE TILT NMEA2000
PTITLE: Airmar DT812PV-235-N2 - 235 kHz - Smart sensor passing through plastic hull - 12° tilt - NMEA 2000 - 6M Cable
TYPE: Marine Navigation & Instruments | Transducers
VENDOU: Airmar
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS Airmar DT812PV-235-N2 - 235 kHz - Sensor smart through plastic shell - 12 Tilt - NMEA 2000 - 6M Cable
Gtags:
GSpecs:
Airmar DT812PV-235-N2 - 235 kHz - Smart sensor through plastic shell - 12° tilt - NMEA 2000 - 6M cable Product description
The DT800 uses Airmar's proven inclined element and high flow technologies in this Smart™ depth and temperature technology. Sensor. The DT800 is a retractable, low-profile through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar's Smart™ sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.
The ceramic is angled inside the housing, compensating for the dead state of the hull and steeringthe transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 is sold with a choice of rugged housings - plastic, bronze, or stainless steel - to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.
The DT800 is available in three models of inclined elements:
- Fixed version inclined at 20° for hull angles from 16° to 24°
- Fixed version inclined at 12° for hull angles from 8° to 15°
- Fixed version inclined at 0° for hull angles from 0° to 7°
DT812PV-235-N2 - 235kHz - Smart sensor passing through plastic shell - 12° tilt - NMEA 2000 - 6M Cable
Airmar has taken its proven Tilted Element™ and high-speed technologies and applied them to its leading range of Smart™ sensors. The DT800 is a discreet, retractable through-hull sensor that calculates precise depth and temperature data and sends it to any NMEA 0183 or NMEA 2000 display. The DT800 operates at a frequency of 235 kHz and can operate simultaneously with other onboard Airmar 50/200 kHz transducers without interference. Broadband ceramic provides depth readings up to 183 m (600'), as well as accurate shallow water readings down to 500 mm (1.6'). Available in fixed tilt of 0°, 12° or 20°, the DT800 is perfect for powerboat and sailboat applications. It comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile cases do not affect performancences of the hull and will provide accurate readings at high speeds.
Airmar's Smart™ sensors incorporate microelectronics: the transducer element and signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All you need to receive depth and temperature data is a single cable to a compatible device or display. Because the ceramic is angled inside the housing, the transducer beam is aimed downward, resulting in strong bottom echo returns and accurate depth readings. Retractable housing with self-closing valve reduces water flow into the container when the transducer is removed for cleaning.
Smart™ Sensor Features
- Broadband ceramic available with 0°, 12° and 20° tilt options
- Improved depth performance
- Maximum depth range: 180M (594')
- Minimum range 0.5M (1.6')
- Urethane face provides enhanced sensitivity
- Excellent high-speed performance
- Fixed 12° tilt for 8° to 15° tilt
- li>
- NMEA 2000 output
- Power 100 W RMS
- Frequency: 235 kHz
- Cone: 12°
- All models have depth and temperature
- 235 kHz eliminates interference with fishfinders
- Retractable insert facilitates maintenance
- Usable shaft length: 57 mm (2.25")
- 6M (19.8")ctor NMEA 2000 Devicenet cable and connector
- 51mm (2") housing
- Blank plug included
- Fits maximum shell thicknesses of 54 mm (2 1/8")
- Fits minimum shell thicknesses of 6.3 mm (0. 25")
DT812PV-235-N2-235kHz-Through-hull smart sensorplastic-12° tilt-NMEA 2000-6M CableAirmar has taken its proven tilt element and high-speed technology and applied it...
Frequently Asked Questions (FAQ) about Airmar DT812PV-235-N2 - 235 kHz - Plastic Thru-hull smart sensor - 12° tilt - NMEA 2000 - 6M cable Who is Airmar?
How to describe Airmar DT812PV-235-N2 - 235kHz - Thru-hull smart sensor plastic shell - 12° tilt - NMEA 2000 cable - 6M?
What is the operating voltage of the product?
What is the rated power of the product?
What are the transducer functions of the product? product?
In which country is this product manufactured in?
What is the frequency band of the product?
What is the Airmar DT812PV-235-N2- 235 kHz - Smart sensor through plastic shell - 12° tilt - NMEA 2000 - 6M cable package dimensions and weight?
Is this product single or dual frequency?
How to mount it or what is the mounting style of the Airmar DT812PV-235-N2 - 235 kHz - Smart sensor passing through the plastic shell - 12° tilt - NMEA 2000 - 6M cable?
What is the mounting style? angle of inclination of the product?
Where is the product commonly used? ?
What is the display connector of the product?
What is the length of the cable?
What is the material of the product casing?
What is the communication method of the product?
What is the maximum depth of the product?
What is the Deadrise product range?
What is the hole size of the product?
Does this product have an inclined element?
br/> What shell material is suitable for this product?
What is the usable shaft length of the product?
What is the maximum dead height of the product?
What is the maximum rise angle of the product?
What are the manufacturer's ratings for Airmar DT812PV-235-N2 - 235 kHz - Smart sensor passing through the plastic hull - 12° tilt - NMEA 2000 - 6 M cable?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar prides itself on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar DT812PV-235-N2 - 235 kHz - Smart sensor passing through plastic shell - 12° Tilt - NMEA 2000 - 6M cable?
The DT800 uses Airmar's proven tilted element and broadband technologies in this Smart™ depth and temperature sensor. The DT800 is a discreet, retractable through-hull transducer that accurately calculates depth and temperature datature and sends them to the NMEA 2000 network. Airmar's Smart™ sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.
The ceramic is angled inside the housing, compensating for the dead state of the hull and directing the transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The case has ae water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.
The DT800 is available in three inclined element models:
- Fixed version inclined at 20° for hull angles from 16° to 24°
- Fixed version inclined at 12° for hull angles from 8° to 15° °
- Fixed version tilted at 0° for hull angles from 0° to 7°
The DT800 uses Airmar's proven tilted element and high flow technologies in this depth and sensor Smart™ temperature sensor The DT800 is a retractable, discreet through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar integrates microelectronics: the transducer element and the signal processor are only a few millimeters apart. The signal from the depth transducer is processed directly inside the sensor itself. which is necessary to receive depth and temperature data is asimple cable to a compatible network or display.
The ceramic is angled inside the housing, compensating for the dead state of the shell and directing the transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The housing is equipped with a water valve which minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.
The DT800 is available in three models of inclined elements:
- Fixed at 20° inclined version for hull angles from 16° to 24°
- Fixed version inclined at 12° for angles hull angle from 8° to 15°
- Fixed version inclined from 0° for0° to 7° hull blind angles
Save $91 on the purchase of the Airmar DT812PV-235- N2 - 235 kHz - Smart sensor through plastic hull - 12° tilt - NMEA 2000 - 6M cablefor only $304 from NVN Marine! Same day dispatch before 3 p.m. Airmar DT812PV-235-N2 - 235 kHz - Smart Sensor Through Plastic Shell - 12° Tilt - NMEA 2000 - 6M Cable Technical Specifications
Type: | Navigation and maritime instruments | Transducers |
---|---|
Supplier: | Airmar |
Weight: | 1.25 lbs |
Product Manual: | Download PDF |
Product brochure: | Download PDF |
Product installation: | Download PDF |
Shipping Weight: | 1.25 lbs |
---|---|
Box Sizes: | 4.00 (h) x 8.00 (w) x 10.00 (w) |
Cubic feet: | 320.0 |
Returnable: | Yes |
- Airmar DT812PV-235-0 - DT812 235 kHz 60 W Smart sensor plastic with valve NMEA 0183 12° tilt DT
- Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000
- Airmar DT812BV-235-0 - DT812 235 kHz 60 W Smart sensor bronze with valve NMEA 0183 12° tilt DT
- Airmar DT800SV-235-N2 - DT800 235 kHz 100 W Smart sensor stainless steel with valve NMEA 2000 0° tilt DT
- Airmar DT800SV-235-0 - DT800 235 kHz 60 W Smart sensor stainless steel with valve NMEA 0183 0° tilt DT
- Airmar DT800PV-235-N2 - DT800 235 kHz 100 W Smart sensor plastic with valve NMEA 2000 0° tilt DT
- Airmar DT800PV-235-0 - DT800 235 kHz 60 W Smart sensor plastic with valve NMEA 0183 0° tilt DT