Airmar SS175C-0-HW 0d CHIRP High and Wide Tilt with 9-Pin Navico Marine Navigation & Instruments

Airmar SS175C-0-HW 0d Tilt

Wide and High CHIRP with 9-Pin Navico

Model: SS175C-0- HW

Fast response depth and water temperature sensor
1 kW with a maximum depth of 152 m (500')
High frequency: 150 kHz to 250 kHz = constant 25° beamwidth
100 kHz total bandwidth from a single transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and target separation from fish
The High beam width provides greater coverage under the boat to detect fish in the upper water column
Low profile Through-hull housing provides good resolution at high speeds when installed correctly
Stainless steel housing for use onstepped, planing or displacement hulls in fiberglass, wood or metal
Recommended boat size: Up to 11 m (36')
Also available as a rig on transom (TM185HW), in hull (M285HW) and in bronze housingG models (B175HW)
Exclusive Xducer ID technology

Get greater coverage under your boat with Airmar's unique Chirp-ready wide-beam, high-frequency transducers. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on display compared to most high frequency narrow beam transducer options.

The top wide is the ideal choice for inshore and pelagic fishing, where resolution andMaximum coverage under the boat is essential up to 500'.

Tilted element transducers have the element attached at an angle of 20°, 12° or 0° within the transducer housing. Because the transducer is installed almost flush with the hull, when the transducer is installed, the tilt corrects hull deadrise and orients the ceramic element horizontally to ensure maximum echo returns to the transducer. /p>Specifications

Weight	2.7 kg (6 lb)
Deadrise Shell	Up to 24°
Acoustic window	Urethane
Hole Size	98 mm (3-7/8"")
An internal ceramic assembly

Model: SS175C-0-HW fast response water depth and temperature sensor 1 kW, maximum depthale of 152 m (500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth 100 k-one transducer The total bandwidth of the device is Hz, covering the popular fishing frequency of 200 kHz - all other bandwidth signals provide excellent shallow water performance, bottom detail and fish separation from targets. The width of the driving lights provides greater coverage and can be used under the boat. The short column of water above the detected fish enters the cockle shell. If installed correctly, it can provide good speed resolution. The stainless steel hull can be used for ladders, sliding or draining hulls made of fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear mount (TM185HW), hull (M285HW) and bronze hull (B175HW) models are also provided. Exclusive Xducer ID technology. LAirmar's unique Chirp-ready high-frequency wide beam sensor can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high frequency narrow beam sensor options, the constant wide beamwidth provides twice the coverage under the vessel and produces an excellent fish arch effect on the screen. The height and width are ideal for offshore and offshore fishing. In the case of resolution as low as 500', resolution and maximum coverage are both crucial. The inclined transducer element has elements fixed in the transducer housing at an angle of 20°, 12° or 0°. Because the installation position of the transducer is almost flush with the hull, when the transducerr is installed, the tilt can correct the dead angle of the hull and orient the ceramic element horizontally to ensure the maximum echo return to the transducer. - Specific weight: heavy shell 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)
PRODUCT ID: 1001680
SKU : NVN-1001680
CSKU: CWR-1001680
REWRITE: 1012791-airmar-ss175c-0-hw-0d-tilt-high-wide-chirp
MPN: AIRSS175C0HW9N
UPC:
ASIN:
WSKU: AIRSS175C0HW9N
SSKU:
NAME: Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin
PTITLE: Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin
TYPE: Navigation and Marine Instruments -> Transducers
SELLER: Airmar
Airmar SS175C-0- HW 0d Tilt High Wide Chirp with Navico 9-Pin

Gtags:

GSpecs:

Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin Product Description

Airmar SS175C-0-HW 0d Tilt

High Wide CHIRP with Navico 9 pin

Model: SS175C-0-HW

Fast response water depth and temperature sensor
1 kW with a maximum depth of 152 m (500')
High frequency: 150 kHz to 250 kHz = constant 25° beamwidth
100 kHz total bandwidth from 'one transducer
Covers the popular fishing frequency of 200 kHz plus everything else in the bandwidth.
High frequency provides superior shallow water performance, details bottom and target separation from fish
High beam width provides greater coverage under the boat. for detecting fish in the upper water column
Low profile through-hull housing provides good resolution at high speeds when installedproperly
Stainless steel housing for use on stepped, planing or displacement hulls made of fiberglass, wood or metal
Recommended boat size: up to 11 m (36')
Also available in transom mounted (TM185HW), in hull (M285HW) and bronze housing (B175HW) models
Exclusive Xducer ID technology

Get more coverage under your boat with Airmar's unique Chirp-ready, wide-beam, high-frequency transducers. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on display compared to most high frequency narrow beam transducer options.

The topwide is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 500'.

Tilted element transducers have the element fixed at an angle 20°, 12° or 0° in the transducer housing. Since the transducer is installed almost flush with the hull, when the transducer is installed, the tilt corrects the hull freeze and orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

Specifications

Weight	2.7 kg (6 lb)
Deadrise shell	Up to 24°	td>
Acoustic window	Urethane
Hole size	98 mm (3-7/8"")
An internal ceramic assembly

Model: SS175C-0-HW fast response depth and water temperature sensor 1 kW, maximum depth of 152 m (500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth 100 k transducer - A The total bandwidth of the device is Hz, covering the popular fishing frequency of 200 kHz - all other signals within the bandwidth provides excellent shallow water performance, bottom detail and separation of fish targets. The width of the driving lights provides greater coverage and can be used under the boat. The short column of water above the detected fish penetrates the hull. If installed correctly, it can provide good speed resolution. The stainless steel hull can be used for ladders, sliding or draining hulls made of fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear-mount (TM185HW), shell (M285HW) and c-mount modelsBronze shell (B175HW) are also supplied. Exclusive Xducer ID technology. Airmar's unique Chirp-ready high-frequency wide beam sensor can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high frequency narrow beam sensor options, the constant wide beamwidth provides twice the coverage under the vessel and produces an excellent fish arch effect on the screen. The height and width are ideal for offshore and offshore fishing. In the case of as low as 500', resolution and maximum coverage are both crucial. The inclined element transducer has elements fixed into the transducer housing at an angle of 20°, 12° or 0°. Because the installation position of the transducer is almost flush with the hull, when the transducer is installed, the tilt can correct the dead angle of the hull and orient the ceramic element horizontally to ensure the maximum echo return to the transducer. - Specific weight: heavy shell of 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)

Frequently asked questions (FAQ) About the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin Who is the Airmar?
How to describe the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin?
What is the hole size of the product?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar ispride ourselves on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin? Model: SS175C-0-HW fast response water depth and temperature sensor 1 kW, maximum depth of 152 m (500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth Transducer 100 k-one The device's total bandwidth is Hz, covering the popular fishing frequency of 200 kHz. All other signals in the bandwidth provide excellent shallow water performance, bottom detail and target separation from fish. The width of the driving lights provides greater coverage and can be used under the boat. The short column of water above the detected fish penetrates the hull. If installed correctly, it can provide good speed resolution. The stainless steel shellcan be used for ladders, sliding or draining hulls in fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear mount (TM185HW), hull (M285HW) and bronze hull (B175HW) models are also provided. Exclusive Xducer ID technology. Airmar's unique Chirp-ready high frequency wide beam sensor can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high frequency narrow beam sensor options, the constant wide beamwidth provides twice the coverage under the vessel and produces an excellent fish arch effect on the screen. The height and width are ideal for offshore and offshore fishing. In the case of a resolution as low as500', resolution and maximum coverage are both crucial. The inclined element transducer has elements fixed into the transducer housing at an angle of 20°, 12° or 0°. Because the installation position of the transducer is almost flush with the hull, when the transducer is installed, the tilt can correct the dead angle of the hull and orient the ceramic element horizontally to ensure feedback maximum of the echo towards the transducer. - Specific weight: heavy shell 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)

Get a clear and clear image detailed view of the underwater environment.
The SS175C-0-HW is equipped with a water temperature sensor for accurate temperature readings.
With a maximum depth of 152 m (500'), it is perfect for deep fishing.

The Airmar SS175C-0-HW is a temperature sensorhigh-frequency, high-resolution water sensor that provides accurate and reliable measurements with depths up to 500'.
The SS175C-0-HW features a built-in 1 kW output power designed to withstand the harshest environments.

The Airmar SS175C-0-HW 0d High and Wide TiltCHIRP with Navico 9-Pin is the latest offering from Airmar. This device features a fast-response depth and water temperature sensor with a maximum depth of 152 m (500'). The high frequency of this device is 150 kHz to 250 kHz with a constant of 25&176; beam width.

What is the hole size of the product? 98 mm (3-7/8")

Get a clear and detailed image of the underwater environment.
The SS175C-0-HW is equipped with a water temperature for accurate temperature readings.
With a maximum depth of 152 m (500'), it is perfect for deep-sea fishing.
Airmar's SS175C-0-HW is a high-frequency, high-resolution water temperature sensor that provides accurate, reliable measurements with depths up to 500 feet .
The SS175C-0-HW features an integrated 1 kW power output designed to withstand the harshest environments.
The Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin Model: SS175C-0-HWDepth and 1 kW fast response water temperature sensor with a maximum depth of 152 m (500') High frequency: 150 kHz to 250 kHz = Constant 25& 176; 100 kHz beamwidth is an advanced sonar system.
It has a fast response depth and water temperature sensor, 1 kW output power and can go up to 152 meters deep.
Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 pin Model: SS175C-0-HW
Depth and depth sensor temperature of the'fast response water 1 kW with a maximum depth of 152 m (500' )
High frequency: 150 kHz to 250 kHz = Constant 25& 176; 100 kHz beamwidth

Save $820 on the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9 -Pinfor only $1,269 from NVN Marine! Free same day delivery before 3 p.m. Airmar SS175C-0-HW 0d High and Wide Tilt CHIRP with 9-Pin Navico Technical Specifications

Type:	Marine Navigation & Instruments \| Transducers
Seller:	Airmar
Weight:	11.0 lbs

Airmar SS175C-0-HW 0d High and Wide Tilt CHIRP with Navico 9 Pin User ReviewsAirmar SS175C-0-HW 0d Tilt High Wide CHIRP with Navico 9-Pin Shipping & Returns

Shipping Weight:	11.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please view our Shipping Policy and you can find our Return and Refund Policy here.