Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 Electrical

Ancor heat shrink connectors offer heat activated adhesive built into the heat shrink sleeve. When heated, these connectors form a watertight seal and provide ultimate vibration and stress relief.

Ancor 312699 Attributes

Type: 3/8 inch ring terminal
Wire Gauge: 12 -10 Gauge
Color: Silver End with Yellow Boot
Material: Copper
Quantity: Pack of 100

Ancor 312699 Features & Benefits

Tin plated for corrosion resistance
Pure copper for maximum current flow
Stitched brazed for maximum strength
Heat activated adhesive embedded in heat shrink tubing sleeve
Shrinks to form a watertight seal and ultimate relief from vibration and strain constraints
No supplier guarantee

Ancor 312699 Technical Bulletinses

313938-9193.pdf

12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100

Gauge Size: 12-10
Screw Size: 3/8"
Quantity: 100

Product Features:

Cross-linked polyolefin tubes are much stronger than PVC tubes and do not burn like PVC
Heat activated adhesive liner provides waterproof seal against salt water, oil, acids and sunlight, as well as strain relief
Nylon insulation, preferred by experts, for its marine-grade resistance to sunlight, water, oil, chemicals, vibration and damage from cuts
UL Listed and CSA Recognized
Highest shrink rate: shrinks to 1/3 of original size
Shrinks to 257°F/125°C
Temperature Rangeoperating temperature 40°C to 110°C
ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink sleeve
Shrinks to form a watertight seal and ultimate vibration and stress relief
Tin plated for corrosion resistance
Pure copper for flux maximum current
Brazed seam for maximum strength
Brazed seam for maximum strength
/li>

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, childbirth. defects or other reproduction problems. For more information,

With tinned copper, it can maximize current flow and corrosion resistance. The shrink tube lined with adhesivesif shrinks to form a tight seal and ultimately eliminate vibration and stress.
PRODUCT ID: 48534
SKU: NVN-48534
CSKU: CWR-48534
REWRITE: 59645-ancor -12- 10-gauge-3-8-heat-retractable
MPN: 312699
UPC: 091887316247
ASIN: B000NI1F6C
WSKU: ANC312699
SSKU:
KSKU: A4V312699
br>GSKU:
MSKU: 1-312699
LSKU: 639-312699
NAME: Ancor Gauge 12-10 - 3/8" Heat Shrink Ring Terminal - Pack of 100
NAME_EX: ANCOR 12 - 10 3/8" HEAT SHRINK RING TERMINAL 100PK
PTITLE: Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100
TYPE: Electrical Terminals
SELLER: Ancor
Category Googlery: VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Automotive Parts & Accessories
Ancor Heat Shrink Ring Terminals
Ancor 12-10 Gauge - 3/ 8 inch heat shrink ring terminal -Pack of 100
Automotive Parts and Accessories
Gtags:

Ancor

GSpecs:

Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 Product Description

Ancor heat shrink connectors offer heat activated adhesive embedded in the heat shrink sleeve. When heated, These connectors form a watertight seal and the ultimate relief from vibration and stress.

Ancor 312699 Attributes

Type: 3/8 Inch Ring Terminal
Gauge Wire: 12-10 Gauge
Color: Silver end With yellow boot
Material: Copper
Quantity: Pack of 100

Ancor 312699 Features and Benefits

Tin plated for corrosion resistance
Pure copper for maximum current flow
Soldered seam for maximum strength
Heat activated adhesiveintegrated into the heat shrink tubing sleeve
Shrinks to form a watertight seal and ultimate relief from vibration and stress
No supplier warranty

Ancor Technical Bulletins 312699

313938-9193.pdf

12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100

Gauge Size: 12-10
Screw Size: 3/8"
Quantity: 100

Product Features:

Cross-linked polyolefin tubing is much stronger than PVC tubing and does not burn like PVC
Heat activated adhesive liner provides impervious seal to salt water, oil, acids and sunlight, as well as strain relief
br>
Nylon insulation, preferred by experts, for marine-grade resistance to sunlight, water, oil, chemicals, vibration and aux damage from cuts
UL Listed and CSA Recognized
Highest shrinkage ratio - shrinks to 1/3 of original size
br>
Shrinks to 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve
Shrinks to form a watertight seal and ultimate relief from vibration and stress
br>
Tin plated for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength

This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more informationons, go to P65Warnings.ca.gov.

With tinned copper, it can maximize current flow and corrosion resistance. The adhesive-lined heat shrink tubing shrinks to form a tight seal and ultimately eliminate vibration and stress.

Frequently Asked Questions (FAQ) about Ancor Gauge 12-10 - 3/8" Heat Shrink Ring Terminal - Pack of 100 Who is Ancor?
How to describe Ancor Gauge 12-10 - Terminal 3/8" Heat Shrink Ring Terminal - Pack of 100?
What is the type of product?
What is the material of AncorCaliber 12-10 – 3/8" Heat Shrink Ring Terminal – Pack of 100 ?
What is the gauge of the product?
What is the weight of the product?
What is the color of Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 ?
Is this product ISO approved?
What is the post size of the product?
Who is Ancor? Ancor was founded over 20 years agons to solve the electrical problems encountered by sailors when they ventured offshore in large numbers. General purpose wires and components designed for shore applications have caused significant problems as electrical systems have become more sophisticated and demanding. How to describe Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100? With tin-plated copper, it can maximize current flow and corrosion resistance. The adhesive-lined shrink tubing shrinks to form a tight seal and ultimately eliminate vibration and stress What is the material type of Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100? CopperWhat is the caliber of the product? 12-10 AWGWhat is the weight of the product? 1What is the color of Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100? YellowIs this product ISO approved? UL486AWhat isthe post size of the product? 3/8"

Save $27 on the purchase of Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 b> for only $41 at NVN Marine! Same day dispatch before 3 p.m. Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 Technical Specifications

Type:	Electrical \| Terminals
Supplier:	Ancor
Weight:	0.5 lbs
Gauge:	12-10 AWG
Type:	Ring Terminals
Quantity per package:	100
Heat Shrink:	Yes
Post Size:	3/8"
Post Guide 'user:	Download PDF

Ancor 12-10 gauge - 3/8" heat shrink ring terminal -Pack of 100 User ReviewsAncor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - Pack of 100 Shipping & Returns

Shipping Weight:	0.5 lb
Box sizes:	2.00 (h) x 3.00 ( l) x 8.00 (l)
Cubic feet:	48.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy.icy and you can find our return and refund policy here.