Sale!

Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100

$16

SKU: Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100
Category:

Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100 Electrical

Ancor heat shrink connectors offer heat activated adhesive built into the heat shrink sleeve. When heated, these connectors form a watertight seal and provide ultimate vibration and stress relief.

Ancor 319999 Attributes
  • Type: Heat Shrink Male Plugs
  • Wire Size: 16-14 Gauge
  • Color: Blue
  • Material: Tinned Copper Connector/Heat Shrink Insulation
  • Quantity: Pack of 100
Ancor 319999 Features and Benefits
  • Tin-plated for corrosion resistance
  • Pure copper for maximum current flow
  • Brazed seam for maximum maximum strength
  • UL listed and CSA recognized
  • No supplier warranty
Ancor Technical Bulletins 319999
  • ANC_NPA_001.pdf
  • TCHDAT_CEAncorHeatShrinkTerminals.pdf

Male Heat Shrink Cap 16-14 - Pack of 100

Features:
  • Cross-linked polyolefin tubes are much stronger than PVC tubes and do not burn like PVC.
  • Heat activated adhesive liner provides waterproof seal against salt water, oil, acids and sunlight, as well as strain relief.
  • Nylon insulation, preferred by experts, for marine-grade resistance to sunlight, water, oil, chemicals, vibration and damage from cuts .
  • UL Listed and CSA Recognized
  • Highest shrinkage ratio - shrinks to 1/3 of original size.
  • li>
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature range 40°C. C at 110 degrees. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve
  • Shrinks to form a watertight seal and ultimate vibration and strain relief.
  • Tin plated for corrosion resistance.
  • Pure copper for maximum current flow.
  • Soldered seam for maximum current flow.
  • Soldered joint for maximum current flow.
  • resistance.
  • Wire Range: 16-14/.197
  • Size: 3-5mm/5mm
  • Gender: Male
  • Pkg Qty: 100

    This product can expose you to chemicals including di (2-ethylhexyl) (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,



    Cross-linked polyolefin pipes are much stronger than PVC pipes and do not burn like PVC. The heat activated adhesive liner canbe hermetically sealed against salt water, oil, acid,... -ancor-16-14-male-heatshrink-snap-plug
    MPN: 319999
    UPC: 091887807752
    ASIN:
    WSKU: ANC319999
    SSKU:
    KSKU: A4V319999
    GSKU:
    MSKU: 1-319999
    LSKU: 639-319999
    NAME: Heat Shrink Snap Cap Ancor 16-14 Male - Pack of 100
    NAME_EX: ANCOR 16-14 MALE Heat Shrink Snap Cap 100PK
    PTITLE: Ancor 16-14 Male Heat Shrink Snap Cap - 100 Pack
    TYPE: Electric | Terminals
    SELLER: Ancor
    VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCPARTS & ACCESSORIES REAR


    Ancor Heat Shrink Snap Plug , Male, Size: 16-14 AWG

    Gtags:
    Ancor

    GSpecs:

Ancor 16-14 Male Heat Shrink Cap - Pack of 100 Product Description

Ancor heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve. When heated, these connectors form a watertight seal and provide ultimate relief from vibration and stress.

Ancor 319999 Attributes
  • Type: Heat Shrink Male Plugs
  • Gauge Wire: 16-14 Gauge
  • Color: Blue
  • Material: Tinned copper connector/heat shrink insulation
  • Quantity: Pack of 100
Ancor 319999 Features and Benefits
  • Tin plated for resistance to corrosion
  • Pure copper for maximum current flow
  • Brazed seam for maximum strength
  • UL listed and C recognizedSA
  • No Supplier Warranty
Ancor 319999 Technical Bulletins
  • ANC_NPA_001.pdf
  • TCHDAT_CEAncorHeatShrinkTerminals.pdf

Male heat shrink cap 16-14 - Pack of 100

Features:
  • Cross-linked polyolefin tubes are much stronger than PVC tubing and do not burn like PVC.
  • Heat activated adhesive liner provides impervious seal to salt water, oil, acids and sunlight. while providing strain relief.
  • Expert-preferred nylon insulation for marine-grade resistance to sunlight, water, oil, chemicals, vibration and damage from cuts.
  • UL Listed and CSA Recognized
  • Highest shrinkage rate: shrinks to 1/ 3 of original size.
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature range 40°C. C at 110 degrees. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve
  • Shrinks to form a watertight seal water and ultimate vibration and strain relief.
  • Tin plated to resist corrosion.
  • Pure copper for maximum current flow.
  • Brazed seam for maximum strength.
  • Thread Range: 16-14/.197
  • Size: 3-5 mm/ 5 mm
  • Gender: Male
  • Quantity/Package: 100

    This product may expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,



    Pipescross-linked polyolefin pipes are much stronger than PVC pipes and do not burn like PVC. The heat activated adhesive liner can be tightly sealed with salt water, oil, acid,...

    Frequently Asked Questions (FAQ) about the snap cap Ancor 16-14 male heat shrink cap - pack of 100 Ancor?
    How to describe the Ancor 16-14 male heat shrink cap - Pack of 100?
    What is the type of product?
    What is the material of Ancor 16-14 male heat shrink? Snap Plug - Pack of 100?
    What is the size of the product?
    What is the weight of the product?
    What is the color of the Ancor 16-14 male heat shrink plug - Pack of 100?
    Is this product ISO approved?
    Who is Ancor? Ancor was founded over 20 years ago to solve electrical problems faced by sailors when venturing offshore in large numbers. Usa wires and componentsGeneral ge designed for land-based applications have caused significant problems as electrical systems have become more sophisticated and demanding. How to describe the Ancor 16-14 Male Heat Shrink Cap - Pack of 100? Cross-linked polyolefin pipe is much stronger than PVC pipe and does not burn like PVC. The heat-activatable adhesive coating can be hermetically sealed with salt water, oil, acid,...What is the type of product? Male Heat Shrink Snap Caps What is the material of Ancor 16-14 Male Heat Shrink Snap Caps - Pack of 100? Tinned Copper Connector/Heat Shrink InsulationWhat is the gauge of the product? 16-14What is the weight of the product? 2What is the color of the Ancor 16-14 male heat shrink cap - pack of 100? Blue Is this product ISO approved? UL
    CSA

    Save $27 on the purchase of Male Heat Shrink Cap Ancor 16-14 - Pack of 100for only $41 from NVN Marine! Same day dispatch before 3 p.m. Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100 Technical Specifications
    Type:

    Electric | Terminals

    Supplier:

    Ancor

    Weight:

    0.2 lbs

    Heat shrink:

    Yes

    Gauge:

    16-14 AWG

    Type :

    Snap caps

    Quantity per package:

    100

    Product brochure:

    Download PDF

    Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100 User Reviews Ancor 16-14 Male Heat Shrink Snap Cap - Pack of 100 Shipping & Returns
    Shipping Weight:

    0.2 lbs

    Box sizes:

    2.00 (h) x 3.00 (w) x 4.00 (w)

    Cubic feet:

    24.0

    Returnable:

    Yes

    USPS First Class:

    Yes

    P65:

    Yes