ANDERSEN 40 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel Sailing
40 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel
If you pride yourself on having your yacht at its best, the fully automatic Winch ANDERSEN's stainless steel Tailing Winch creates the dock stop appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.
From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".
Like all ANDERSEN™ winches, our fully stainless Self-Tailing winch features the exclusive Power Rib™ drum.stainless steel for maximum power and extended line. life. This model also uses our exclusive self-tailing feature which automatically adapts to Wi-Fi. A range of different line sizes.
Materials
Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacturing to further increase strength. and the hardness when it takes its final form. The resulting construction is lightweight, yet rigid and inflexible.
The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable.
The upper center rods are made from aluminum bronze for ultimate durability. The combination of materials and design contributes to a lightweight and rigid final assembly that highlights. the mechanical efficiency of the hoisthe. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable.
Power Rib™
ANDERSEN© winches are equipped with the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs rising up the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches that have an abrasive surface orsimilar to sandpaper. Such surfaces tend to wear on both the strings and themselves.
Power ratio
The power ratio is the mechanical advantage of the winch and is calculated as follows:
handle length x gear ratio
drum radius
The pull of the winch is based on the power ratio and not just on the physical size of the winch. the winch or the diameter of the drum. The power ratio is used to determine the load that the winch can handle as follows: handle pull (kg x power ratio = winch pull (kg).
This means that by applying a 10kg load, using a standard 10" handle, on a 40:1 winch power ratio, the winch can pull 400kg, assuming the winch is 100% efficient, which does not is not possible in practice because the efficiency is reduced by mechanical friction lossesinternal e.
Features
The Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether for adjustment or relaxation. The highly polished stainless steel surface minimizes vertical friction and allows the loaded cable to rotate. slide up easily as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller and ball bearings support the highest drum loads toward the center. winch rod, minimizing efficiency losses due to friction.
The auto-tail arm can be rotated 360 degrees for optimal positioning (40ST and above). Self-tailing stainless steel jaws automatically adjust to accommodate different rope sizes.
Winchess Andersen are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use.
Specifications:
Drum Ø:75 mm (2-15/16")
Base Ø:152 mm(6")
Height:174 mm(6-7/8")
Line Input:71 mm(2-13/16")
Line Size:8-14 mm(1/8 - 11/16")
Weight;4.9 kg (10.8 lbs)
1st gear gear ratio1 .3:1
2nd gear gear ratio:6.0:1
1st gear power ratio:8 .9:1
2nd gear power ratio:40.0:1
It combines all the convenience and powerful functions of winding winches Andersen automatic with a superb appearance entirely in stainless steel.
ID PRODUCT: 55005
SKU: NVN-55005
CSKU: CWR-55005
REWRITE: 66116-andersen-40-st-fs-2-speed-self-tailing
MPN: RA2040010000
UPC: 9316800467761
ASIN: B00QL5PCFG
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: ANDERSEN 40 ST FS - Manual Self-Tailing Winch 2 Speeds - Fully Stainless Steel
NOM_EX: ANDERSEN 40 SELF TAILING WINCH 2 SPEEDS FULL INOX
PTITRE: ANDERSEN 40 ST FS - Manual Self-Tailing Winch 2 Speeds - Complete Stainless Steel
TYPE: Sailing | Winches
SELLER: ANDERSEN
SPORTING GOODS> OUTDOOR LEISURE> BOATING AND WATER SPORTS
Sports
Andersen 40 ST FS - Maunal Self-Tailing Winch 2 Speed - Full Stainless Steel (55005)
Andersen 40 St Fs 2Speed SelfTailing Full Stainless Steel Hand Winch S by Hodges Marine
Sports
Gtags:
GSpecs:
ANDERSEN 40 ST FS - 2-speed Self-Tailing manual winch - Completely in stainless steel Product description
40 ST FS - 2-speed Self-Tailing manual winch - Completely in stainless steel
If you pride yourself on having your yacht looking its best, ANDERSEN's fully stainless self-tailing winch creates the dock stopping appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.
From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".
Like all winchesANDERSEN™, our Self-Tailing Full Stainless winch features the exclusive Power Rib™ stainless steel drum for maximum power and extended life. This model also uses our exclusive self-tailing device which automatically adapts to a wide range of different line sizes.
Materials
The drums of Andersen winch are made from quality 316L stainless steel, cold formed in stages during manufacturing to further increase strength and hardness as it takes its final shape. The resulting construction is lightweight, yet rigid and inflexible.
The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable.
The upper center rods are made from aluminum bronze for ultimate durability. The combination ofs materials and design contribute to a light and rigid final assembly that highlights. the mechanical efficiency of the winch. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable.
Power Rib™
ANDERSEN© winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, the drums ANDERSEN winches have vertical ribs that run across the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. Adhesion guaranteed byr ribs will stay the same year after year, unlike many other winches that have an abrasive or sandpaper-like surface. Such surfaces tend to wear on both the strings and themselves.
Power ratio
The power ratio is the mechanical advantage of the winch and is calculated as follows:
handle length x gear ratio
drum radius
The pull of the winch is based on the power ratio and not just on the physical size of the winch or the diameter of the drum. The power ratio is used to determine the load the winch can handle as follows: handle pull (kg x power ratio = winch pull (kg).
This means that by applying a 10 kg load, using a standard 10" handle, on a 40:1 Power Ratio winch, the winch can pull 400 kg, assuming the winch is efficient at 100%. This is not possible in practice because efficiency is reduced by internal mechanical friction losses.
Features
Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether for tuning or easing. The highly polished stainless steel surface. minimizes vertical friction and allows loaded cable turns to slide easily upward as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller bearings and ball bearings support the highest drum loads according to CE inside the winch shaft, minimizing efficiency losses due to friction.
The self tailing arm can be rotated 360 degrees for optimal positioning (40ST andmore). Self-tailing stainless steel jaws automatically adjust to accommodate different rope sizes.
Andersen winches are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use.
Specifications:
Drum Ø:75 mm (2-15/16")
Base Ø:152 mm(6")
Height:174 mm(6-7/8")
Line Input:71 mm(2-13/16")
Line Size:8-14 mm(1/8 - 11/16")
Weight;4.9 kg (10.8 lbs)
1st gear gear ratio1 .3:1
2nd gear gear ratio:6.0:1
1st gear power ratio:8 .9:1
2nd gear power ratio:40.0:1
It combines all the confort and powerRich functions of Andersen self-winding winches with stunning all-stainless steel appearance.
ANDERSEN 40 ST FS - 2-speed Self-Tailing manual winch - Fully stainless steel Related productsRonstan Quick-Lock winch handle - Single handle - Length 200 mm (8")
Ronstan Quick-Lock Winch Handle - Single Handle - 250mm (10") Length
Ronstan Quick Lock Winch Handle - Palm Handle - 200mm (8") Length
Quick-Lock Winch Handle Ronstan quick lock - Palm handle - 250 mm (10") Length
Frequently asked questions (FAQ) about ANDERSEN 40 ST FS - Self-Tailing 2 speed manual winch - Entirely in stainless steel Who is ANDERSEN?
How to describe ANDERSEN 40 ST FS - Self-Tailing 2 Speed Manual Winch - All Stainless Steel?
Who is ANDERSEN? Beautifully stylish inside and out, sail winchesANDERSEN iers reflect the functional needs and aesthetic requirements of premium sailboats around the world. Developed using state-of-the-art production techniques carefully honed for over 60 years, each of ANDERSEN winches reflects a sincere dedication to providing customers with the most exceptional winch performance of the highest quality.How to describe ANDERSEN 40 ST FS - 2-speed Self-Tailing manual winch - Entirely made of stainless steel? It combines all the convenience and powerful features of Andersen self-winding winches with a stunning all-stainless steel appearance.
- This winch is perfect for anyone who wants their boat to look its best.
- Fits well on a variety of boats and docks.
- Available in two different speeds, so you can choose the one that suits your needs.
- This is the troil you need if you're looking for the perfect finishing touch to your yacht.
- The steel construction ensures durability and longevity, while the classic design is an eye-catching addition to any boat.
- li>
- It features an all stainless steel drum and gear.ox, ensuring reliable performance in all conditions.
- If you're looking for a way to make your yacht stand out, this is it.
- The all stainless steel winch will give your boat the curb appeal you want. li>
- Ideal for boats that need a new look, this winch will not disappoint.
Save $129 with the purchase of the ANDERSEN 40 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel for only $1,165 from NVN Marine! Same day dispatch before 3 p.m. ANDERSEN 40 ST FS - Self-Tailing 2-speed manual winches - Full stainless steel technical specifications
| Type: | Sail | Winches |
|---|---|
| Supplier: | ANDERSEN |
| Weight: | 11.1 lbs |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Shipping Weight: | 11.1 lbs |
|---|---|
| Box Sizes: | 6.00 (h) x 6.00 (w) x 7.00 (w) |
| Cubic feet : | 252.0 |
| Returnable: | Yes |
For detailed shipping conditionsillees, please check our shipping policy and you can find our return and refund policy here.
- ANDERSEN 40 ST BT - Self-Tailing 2-speed manual winch - Black trim
- FS ANDERSEN 34ST E1 electric winch - 24V
- FS ANDERSEN 34ST E1 electric winch - 12V
- ANDERSEN 34ST Compact FS Electric Winch Below Deck Variable Speed - 24V
- ANDERSEN 34ST Compact FS Electric Winch Below Deck Variable Speed - 12V
- ANDERSEN 34ST Compact Electric Above Deck Variable Speed FS Winch - 24V
- ANDERSEN 34ST Compact Electric Above Deck Variable Speed FS Winch - 12V
