Sale!
Bennett Trim Tab Kit 30" x 12" without control
Bennett Trim Tab Kit 30" x 12" without control

Bennett Trim Tab Kit 30" x 12" without control

$93

SKU: Bennett Trim Tab Kit 30" x 12" without control
Category:

Bennett Trim Tab Kit 30" x 12" without control Boat Outfitting

Bennett Trim Tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard Trim Tab Kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. more information, visit P65Warnings.ca.gov



Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. , developed and tested for almost 40 years, aiming to provide years of reliable service. Each decorative piece is cut and bent, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no hoses.external parts sensitive to corrosion. In addition, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, hold it firmly and retract stably during use. Bennett standard trim kits are ideal for cruisers or cruisers who want to optimize performance in a variety of sea conditions. The kit contains all components required for installation. Bennett 30x12 Decorative Strip Kit No Control Conditions: This product is new, unopened and sealed in its original factory packaging box.
PRODUCT ID: 16880
SKU: NVN-16880
CSKU: CWR-16880
REWRITE: 27991-bennett-trim-tab-kit-30-x-12
MPN: 3012
br> br> UPC: 666285125540
ASIN: B000N9MRW2
WSKU: BEN3012
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Bennett Trim Tab Kit 30" x 12" without control
EX_NAME: BENNETT MARINE 3012 TRIM TABS WITHOUT CONTROL
PTITLE: Bennett 30" x 12" trim kit without control
TYPE: Boat Outfitter | Trim Tabs
SELLER: Bennett Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERCRAFT PARTS & ACCESSORIES
PC Accessory
Bennett Trim Tab Kit 30" x 12" no control (3012) (16880)
Bennett Trim Tab Kit 30" x 12" no control
br> PC Accessories
Gtags:

GSpecs :

Bennett 30" x 12" Non-Control Trim Tab Kit Product Description Bennett trim tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard trim tab kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,



Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine Factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that worksrse the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, hold it firmly, and retract steadily during use. Standard Trim Kits Bennett Standard Trim Kits are ideal for cruisers who want to optimize performance in a variety of sea conditions. The kit contains all components required for installation. Bennett 30x12 Decorative Strip Kit No Control Conditions: This product is new, unopened and sealed in its original factory packaging box.

Bennett 30" x 12" daggerboard kit without control Related productsTecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2- 13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R4 rudder anode - Zinc - 5" diameter x 5/8" thick
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" diameter
Tecnoseal R4AL rudder anode - Aluminum - 5" x 5/8"
br />Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
Tecnoseal R2MG Rudder Anode - Magnesium - 2-13/16" Diameter


Frequently Asked Questions (FAQ) about Bennett 30" x 12" No Control Trim Tab Kit Who is Bennett Marine?
How Describe the Bennett 30" x 12" No Control Trim Tab Kit?
What is the construction of the product?
What is the actuator type?
Who is Bennett Marine since 1960, Bennett Marine is the world leader in trimmer technology. The name Bennett Marine has become synonymous with quality product andExceptional customer service. Look around the shipyard, ask your friends. Find out what the best boat builders are installing, we are convinced that the best choice will be Bennett Marine. How to describe the Bennett 30" x 12" No Control Trim Tab Kit Bennett Decorative Sheet proudly stands? Designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida, each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure the reliable unit can deflect firedecorative ille, hold it firmly and retract regularly during use. Standard Trim Kits Bennett Standard Trim Kits are ideal for cruisers who want to optimize performance in a variety of sea conditions. The kit contains all components required for installation. Bennett 30x12 Decorative Strip Kit No Control Conditions: This product is new, unopened and sealed in its original factory packaging box. What is the construction of the product? Stainless Steel
      What is the type of actuator? Hydraulic

      Save $323when you purchase the Bennett Trim Tab Kit 30" x 12" without controlfor only $584from NVN Marine! Same day dispatch before 3 p.m. Trim Bennett 30" x 12" No Check Tab Kit Technical Specifications
      Type:

      Boat Equipment | Compensating tabs
      Seller:

      Bennett Marine
      Weight:

      38.0 lbs
      Construction:

      Stainless steel
      Actuator type:

      Hydraulics
      User Guide:

      Download PDF
      Product Manual:

      Download PDF
      Product Installation :

      Download PDF
      Bennett 30" x 12" Trim Tab Kit Without OrderUser ReviewsBennett Trim Tab 30" x 12" Kit without shipping and returns control
      Shipping weight:

      38.0 lbs
      Box sizes:

      5.00 (h) x 15.00 (w) x 36.00 (w)
      Cubic feet:

      2,700.0
      Returnable:

      Yes
      P65:

      Yes

      To knowdetailed shipping terms, please see our shipping policy and you can find our return and refund policy here.

Related products