Bennett Trim Tab Kit 42" x 9" Without Control Boat Outfitting

Bennett Trim Tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard Trim Tab Kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. more information, visit P65Warnings.ca.gov

Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. , developed and tested for almost 40 years, aiming to provide years of reliable service. Each decorative strip is cut and bent, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no hoses.external parts sensitive to corrosion. In addition, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, fix it firmly and retract stably during use. The b kit is ideal for cruisers who want to optimize performance in various sea conditions. The kit contains all components required for installation. Bennett 42x9 Decorative Strip Kit No Control Conditions: This product is brand new, unopened and sealed in its original factory packaging box.
PRODUCT ID: 16875
SKU: NVN-16875
CSKU: CWR-16875
REWRITE: 27986-bennett-trim-tab-kit-42-x-9
MPN: 429
br> br> UPC: 666285111505
ASIN: B000OTMM3K
WSKU: BEN429
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Bennett Trim Tab Kit 42" x 9" without control
NAME_EX: BENNETT MARINE 42 X 9 TRIM TABS WITHOUT CONTROL
PTITLE: Kit de trim Bennett 42" x 9" without control
TYPE: Boat Outfitter | Trim Tabs
SELLER: Bennett Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Bennett Trim Tab Kit 42" x 9" w/o Control

Gtags:

GSpecs:

Bennett 42" x 9" Non-Control Trim Tab Kit Product Description Bennett trim tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard trim tab kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine Factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative strip is cut and folded, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs throughget the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, secure it firmly, and retract steadily during use. Bennett Standard Decorative Tab Kit Standard Decorative Tab Kit iIt is ideal for cruisers who want to optimize their performance in various sea conditions. The kit contains all the components necessary for installation. Bennett 42x9 Decorative Strip Kit No Control Conditions: This product is brand new, unopened and sealed in its original factory packaging box.

Bennett 42" x 9" daggerboard kit without control Related productsTecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2- 13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" ddiameter
Tecnoseal R4 rudder anode - Zinc - 5" diameter x 5/8" thick
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Anode Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" diameter
Tecnoseal R4AL Rudder Anode - Aluminum - 5" x 5/8"
Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
Tecnoseal R2MG Rudder Anode - Magnesium - 2-13/16" Diameter

Frequently Asked Questions (FAQ) About Bennett 42" x 9" No Control Trim Tab Kit Who is Bennett Marine?
How to Describe the Bennett 42" x 9" No Control Trim Kit ?
What is the construction of the product?
What is the type of actuator?
Who is Bennett Marine since 1960, Bennett Marine is the world leader? of trim technology The name Bennett Marine has become synonymous with quality and quality products.exceptional customer service. Look around the shipyard, ask. your friends, find out what the best boat builders install, we are convinced that the best choice will be Bennett Marine. How do I describe the Bennett 42" x 9" No Control Decorative Tab Kit? The sheet is proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, with the goal of providing years of reliable service. Each decorative strip is cut and folded, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure the reliable unit can deflect die sheetcorative, fix it firmly and retract regularly during use. Standard Decorative Tab Kit The Bennett Standard Decorative Tab Kit is ideal for cruisers who want to maximize performance in a variety of sea conditions. The kit contains all components required for installation. Bennett 42x9 Decorative Strip Kit No Inspection Condition: This product is brand new, unopened and sealed in its original factory packaging box. What is the construction of the product? Stainless Steel

$341

Bennett 42" x 9" No-Control Trim Kit

$617

Type:	Boat Equipment \| Compensating tabs
Seller:	Bennett Marine
Weight:	42.0 lb
Construction:	Stainless steel
Actuator Type:	Hydraulic
User Guide:	Download PDF
Product Manual:	Download PDF
Product Installation:	Download PDF

5.00 (h) x 15.00 (w) ) x 42.00 (l)

3,150.0

Yes

For detailed shipping terms, please see our shipping policy and you can find our shipping policy retour and refund here.