BEP Pro Installer 400A EZ Mount Battery Selector (1-2-Both-Off) Electrical

Pro Installer 400A EZ-Mount Battery Switcher (1-2-Both-Off)

As simple as 1, 2, 3, these revolutionary battery switches let you wire up from the front. Installation has never been so simple and wiring so accessible. With their shared interconnect height, EZ-Mount Battery Switches "gang" directly with the Pro Installer busbar line, resulting in the fastest, most compact installations. Optimized cable access makes installation easier. Pro Installer switches set the new benchmark with exceptional ergonomics, an intuitive look and feel and are designed from the finest materials to withstand harsh marine environments. The exceptional performance and functionality of this powerful new generation battery switch appeal to both the installer and the end user. All valleysEZ-Mount Switch ratings, footprints and features match the high quality of our standard switches.

Tested to UL1107, CE Ignition Protection
10mm (3/8") tin plated copper studs
Stainless steel washers/nuts
Fiber reinforced plastics
br>
400A continuous / 600A 5 minutes intermittent / 1500A 10s starting
IP66 waterproof
Same interconnection height as Pro Installer
Removable button allows isolation during maintenance
3 removable side plates for protection
Industry standard 3.85" x 3.85" footprint

Specifications
Mount: Surface only
Voltage: 48V DC (for 12-48V systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1-2-Both -Off
Stud: 3x 10 mm (3.8")

WARNING: This This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

It's never been so easy to install and so easy to wire. With its shared interconnect height, EZ-Mount batteries can change "clusters" directly through Pro Installer...
PRODUCT ID: 58589
SKU: NVN-58589
CSKU: CWR-58589
REWRITE: 69700-bep-pro-installer-400a-ez-mount-battery-selector
MPN: 771-S-EZ
UPC: 843687007692
ASIN: B00NW4V636
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 69-771SEZ
NAME: BEP Pro Installer 400 Amp EZ Mount Battery Selector(1-2-Both-Off)
NAME_EX: BEP PRO INSTALLER 400A EZMOUNT BATTERY SELECTOR 1-2-TWO-OFF
PTITRE: BEP Pro Installer 400A EZ-Mount Battery Selector (1-2-Both) -Off)
TYPE: Electric | Battery Management
SUPPLIER: BEP Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

Marinco Power Products Pro Installer 400A EZ-Mount On/Off Battery Switch - Copper

Gtags:

Switch

GSpecs:

BEP Pro Installer 400 Amp EZ Mount Battery Selector (1-2-both disabled) Product Description Pro Installer 400 Amp EZ Mount Battery Selector (1-2-both disabled)

As simple as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Installation has never been so simple and wiring so accessible. With their shared interconnect height, EZ-Mount Battery Switches "gang" directly with the Pro Installer busbar line, resulting in the fastest, most compact installations. Optimized cable access makes installation easier. Pro Installer switches set the new benchmark with exceptional ergonomics, an intuitive look and feel and are designed from the finest materials to withstand harsh marine environments. The exceptional performance and features of this powerful bass cutternew generation tteries appeal to both the installer and the end user. All EZ-Mount switch ratings, footprints and features match the high quality of our standard switches.

Tested to UL1107, ignition protection, CE
10mm (3/8") tin plated copper studs
Stainless steel washers/nuts
Fiber reinforced plastics
400A continuous / 600A 5 minutes intermittent / 1500A 10s starting
Waterproof IP66
Same interconnect height as a Pro installer
Removable button allows isolation during maintenance
3 removable side plates for protection
Industry standard 3.85" x 3.85" footprint

Specifications
Mounting : surface only
Voltage: 48 V DC (for 12-48 V systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1-2-Both-Off
Stud: 3x 10mm (3.8")

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other diseases. other reproductive problems. For more information,

It has never been easier to install and easier to wire. Thanks to its shared interconnection height, EZ-Mount batteries can change "clusters" directly via Pro Installer...

BEP Pro Installer 400A EZ-Mount battery selector (1-2- Both-Off) ProductsAncor Black 2 AWG Battery Cable - 25'
Ancor Red 2 AWG Battery Cable - 25'
Ancor Black 2/0 AWG Battery Cable - 100'
Ancor Black 2/0 AWG Battery Cable - 100' Ancor Red Battery 2/0 AWG - 100'
Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - Pack of 2
LugAncor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25 Pack
Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2 Pack
Ancor Heavy Duty Lugs - Wire 1 gauge - 3/8" post - Pack of 25
Ancor heavy duty lugs - 1 /0 gauge wire - 3/8" post - Pack of 2
Ancor heavy duty lugs - 0 gauge wire 1/0 - 3/8" Post - Pack of 25

Frequently Asked Questions (FAQ) about EZ Mount Battery Selector 400A BEP Pro Installer(1-2-Both-Off) Who is BEP Marine?
How to Describe the BEP Pro Installer 400A EZ-Mount (1-2-Both-Off) Battery Selector ?
What positions exist in this product?
Lockable product?
Does this switch have an option to disconnect the alternator field?
Who is the BEP Marine? BEP designs and manufactures a range of high quality electrical solutions designed for marine and motorhome environments.here. Each product manufactured meets rigorous performance specifications and is designed to withstand conditions at sea and on land. BEP engineers and product managers continue to develop the next generation of energy management products. How to describe the BEP Pro Installer 400 Amp EZ Mount (1-2-Both-Off) Battery Selector? It has never been so simple to install and so easy to wire. With its shared interconnect height, EZ-Mount batteries can change "clusters" directly through Pro Installer... What positions exist in this product? 1-2-Both-Off Lockable product? No, does this switch have an option to disconnect the alternator field? No

Save $33 when you purchase the BEP Pro Installer 400 Amp EZ Mount Battery Selector (1-2-Both-Off) for only $52 from NVN Marine! Same day dispatch before 3 p.m. SelectBEP Pro Installer Battery Core 400 Amp EZ Mount (1-2-Both Disabled) Technical Specifications

Type:	Electric \| Battery management
Supplier:	BEP Marine
Weight:	1.2 lbs
AFD:	No
Lockable:	No
Positions:	1-2-Both-Off
Continuous intensity:	400a
Product Manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download PDF

BEP Pro Installer 400A EZ Mount Battery Selector (1-2-Both-Off) User ReviewsBEP Battery Selector Pro Installer 400A EZ-Mount (1-2-Both-Off) Shipping & Returns

WeightShipping s:	1.2 lb
Box sizes:	4 .00 (h) x 7.00 (w) x 8.00 (w)
Cubic feet:	224.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our policy shipping and you can find our return and refund policy here.