Blue Sea 6011 m-Series (Mini) Dual Circuit Battery Switch Plus Electrical

Switch Battery M DualCircPlus

Commonly used on small boats or vehicles where the batteries are located close to the operator. Blue Sea creates innovative, high-quality electrical products to improve the safety, simplicity and reliability of boating.

Attributes of the Blue Sea 6011BSS

Used for: Switching two banks of power simultaneously isolated batteries/for combining battery banks for any charge
Number of positions: 3
Battery input: 2 batteries
Rated voltage: 32 volts
Rated current: 450 amps Intermittent rating and continuous rating of 300 amps
Color: red
With alternator field disconnect: no
With Ignition Protection: No

Blue Sea 6011BSS Features and Benefits

Tin-plated copper studs for maximum conductivity and corrosion resistance
The design of the studsOne-piece terminal connectors never loosen over time
One piece stainless steel flange nut ensures safe and secure connections.
Insulating cover protects rear vehicle.ntacts
Bypass tabs allow access to cables in all directions
No supplier warranty

Blue installation instructions Sea 6011BSS

6011_web_version.pdf

Blue Sea 6011BSS Technical Bulletins

6011_web_version.pdf
M_Switch_Knob.pdf

6011
M Series Battery Switch (mini)

Dual Circuit Plus

Switches two groups of batteries simultaneously with a simple on/off switch while maintaining isolation of the battery bank, minimizing the risk of a flat starter battery
The "Combine Batteries" function provides the ability to combine both battery banks in case of starter batterylow

Features:

Protected ignition - Safe for installation on board gasoline boats
Housing design allows for surface, front panel or rear panel mounting
Insulating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8 stud length " (22.22 mm) to accept multiple cable lugs
Ideal for marine or RV applications
All marine grade metals not corrosive
Molded from durable reinforced polycarbonate
Tactile textures indicate button position by touch only
Label with ON legends /OFF international
The removable key or button remains positively retained
Tag gameall ICON included for circuit identification

This product can expose you to chemicals including di (2-ethylhexyl) (dehp) known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The M Series Waterproof Battery Switch is designed to switch between outboard motor and small boat batteries inboard gasoline engines. The box has a light panel, easy-to-hold and easy-to-hold button, which can be installed on the surface, front panel or rear panel. 3/8" 16 tinned copper studs provide maximum conductivity and corrosion resistance. 7/8" stud lengths accommodate multiple cable terminals. Equipped with an ignition device, it can be safely installed on an aerodynamic vessel.e. UL certification. With CE marking. The waterproof level reaches IP66. With 6 sets of ICON labels for circuit identification. Switch two isolated battery packs at the same time or combine battery packs at all loads. On-off before cutoff design allows switching between batteries without power interruption.
PRODUCT ID: 20507
SKU: NVN-20507
CSKU: CWR-20507
REWRITE: 31618-blue- sea -Mini-battery-switch-6011-m-series
MPN: 6011
UPC: 632085060114
ASIN: B000XBGU28
WSKU: BSS6011
SSKU: BS-6011
KSKU: B6Z6011BSS
GSKU: 6011
MSKU:
LSKU: 661-6011
NAME: Blue Sea 6011 m-Series (Mini) Dual Circuit Battery Switch Plus
NAME_EX: BLUE SEA 6011 BATTERSWITCH in Y
PTITLE: Blue Sea 6011 m-Series (Mini) Dual Circuit Battery Switch Plus
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHIC PARTS & ACCESSORIESULES> WATERCRAFT PARTS & ACCESSORIES

Blue Sea Systems 300A M-Series Battery Switches
Blue Sea 6011 M-Series Battery Switch, Mini
Category Amazon:
Gtags:

Switch
Safety switch

GSpecs:

Blue Sea 6011 m-Series Battery Switch (Mini) Dual Circuit Plus Product Description Switch Battery M DualCircPlus

Attributes of the Blue Sea 6011BSS

Used for: Simultaneously switch two isolated battery banks/to combine battery banks at all loads
Number of positions: 3
Battery input: 2 batteries
Rated voltage : 32 volts
Ampere rating: Intermittent rating of 450 A and continuous rating of 300 A
Color: Red
With ddisconnection of the alternator field: No
With ignition protection: No

Blue Sea 6011BSS Features and Benefits

Tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece terminal stud design will not loosen never with the weather
One-piece stainless steel flange nut ensures safe and secure connections
Insulating cover protects rear contacts
Breakaway tabs allow access to wires in all directions
No vendor warranty

Blue Sea 6011BSS Installation Instructions

6011_web_version.pdf

Blue Sea 6011BSS Technical Bulletins

6011_web_version.pdf
M_Switch_Knob.pdf

6011
M Series Battery Switch (mini)

Dual Circuit Plus

Simulated Switchltaneously two battery banks with a simple on/off switch while maintaining battery bank isolation, minimizing the risk of a discharged starter battery
The "Combine Batteries" system " function offers the possibility of combining the two battery banks in the event of a low starting battery

Features:

Protected ignition - Safe for installation onboard gasoline-powered boats
Housing design allows surface, front panel or rear panel mounting
Insulating cover with snap-on sections protects back contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22 mm) stud length to accept multiple cable lugs
Ideal for marine or RV applications
br>
All non-corrosive marine grade metal
Molded from durable reinforced polycarbonate
Tactile textures indicate button position by touch only
Label with international ON/OFF legends
Removable key or button remains positively retained
ICON label set included for circuit identification

This product can expose you to chemicals including di(2-ethylhexyl) phthalate ( dehp) is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The M Series Waterproof Battery Switch is designed to switch between outboard motor and small boat batteries inboard gasoline engines. The case features an illuminated panel, pointer and easy-to-hold button, which can be installed on the surface, on the front panel or on the rear panel. 3/8" 16 tinned copper studs provide maximum conductivity and corrosion resistance. 7/8" stud lengths accommodate multiple cable terminals. Equipped with an ignition device, it can be safely installed on an aerodynamic vessel. UL certification. With CE marking. The waterproof level reaches IP66. With 6 sets of ICON labels for circuit identification. Switch two isolated battery packs at the same time or combine battery packs at all loads. On-off before cut-off design allows switching between batteries without power outage.

Blue Sea 6011 m-Series Battery Switch (Mini) Dual Circuit Plus Related ProductsBlue Sea 7902 Icon Circuit Identification Label Kit for Battery Switches
Ancor Red Battery Cable 4 AWG - Sold by the foot
Cable dAncor 2 AWG red battery cable - Sold by the foot
Ancor 1 AWG red battery cable - Sold by the foot
Ancor 1/0 AWG red battery cable - Sold by the foot
Red battery cable Ancor 2/0 AWG - Sold by the foot
Ancor Heavy Duty Terminals - 4 Gauge Wire - 3/8" Post - 2 Pack
Ancor Heavy Duty Terminals - 2 Gauge Wire - 3/ Post 8" - Pack of 2
Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - Pack of 2
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - Pack of 2

Frequently Asked Questions (FAQ) About the Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch Who is Blue Sea Systems?
How to describe the Blue Sea 6011 m-Series (Mini) Battery Switch Dual Circuit Plus?
What are the Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch packaging dimensions and weight?
What positions exist in this product?
What is the color of the switchBlue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch? Dual Circuit Plus?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch? Switch Battery M DualCircPlusWhat are the packaging dimensions and weight of the Blue Sea 6011 m-Series (Mini) Battery Switch Dual Circuit Plus? 4.5 (l) X 4.5 (h)are you into this product? 1What is the color of the Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch? Lockable RedProduct? YesWhat are the manufacturer's ratings for the Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch? Switch Battery M DualCircPlus

Save $26 when you purchase the Blue Sea 6011 m-Series (Mini) Battery Switch Dual Circuit Plus for only $39 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch Technical Specifications

Type:	Electric \| Battery Management
Vendor:	Blue Sea Systems
Weight:	0.9 lbs
Positions:	1
Lockable:	Yes
Continuous current:	600a
Product Installation:	Download PDF

Blue Sea 6011 m-Series (Mini) Coupe- Dual Circuit Plus Battery User ReviewsBlue Sea 6011 m-Series (Mini) Dual Circuit Plus Battery Switch Shipping & Returns

Shipping Weight:	0.9 lbs
Box sizes:	3.00 (h) x 4.00 (w) x 7.00 (l)
Cubic feet:	84.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes