Blue Sea 7610 120 Amp SI Series Automatic Load Relay Electrical
SI Series 120A 12/24V ACR SolenoidAutomatically combines batteries during charging, isolates batteries when discharging and when starting engines. Start-up isolation helps temporarily isolate household loads from the motor circuit while the motor is starting to protect sensitive electronic components from sags and spikes. Remote LED indicates ACR states - requires optional LED.
Blue Sea 7610BSS Attributes- Function: Combines batteries during charging, isolates batteries when discharging and when starting of motors
- Operating voltage: 12/24 volts
- Rated current: 175 milliamps
- Length (IN): 3-1/2 inches
- Width (IN): 3.88 inches
- Height (IN): 1.98 inches
- Mounting type: Panel
- Protects sensitive electronic devices with t insulationTemporary Household Loads from Motor Circuit During Engine Starting
- Designed for 12 or 24 Volt Systems
- Hermetically Sealed Contacts and Steam Resistant
- Safe strong ignition protected for installation onboard gasoline boats
- Supports high output alternators up to 120 amps
- Dual sensing
- No Supplier Warranty
- 990170140.pdf
7610
120 Amp SI-Series Automatic Load Relay
- Temporarily isolates household loads from the motor circuit during engine starting to protect electronic components sensitive
- Automatically combines battery banks during charge cycle and isolates when discharging
- 12/24V auto-ranging voltage input
- Waterproof IP67 - temporary immersion for 30 minutes
- Protected ignition - safe for installation on board gasoline boats
- Remote LED output indicates the status of the relay away from the ACR
- The LED indicator indicates when the batteries are combined
- LED flashes for undervoltage lockout and start lockout
- Supports high performance alternators output up to 120 amps
- Included with the ADD A BATTERY dual circuit system
- Automatically combines battery banks during the charge cycle and isolates them when discharging
- Protected against ignition - safe for installation on board gasoline boats
- Activates from any charging source - alternators, battery chargers or solar panels
- Sealed contacts / vapor tight
- Side and bottom openings for power cable connections
- Snap cover protects and insulates connectionsterminal ons
- Tin-plated copper studs for maximum corrosion resistance
- 7/8" stud length (22.22mm) to accept multiple cable terminals
- 1/4" x 0.031" Male Quick Connect Terminals for Ground and Remote LED and Start Interrupt
This product may expose yourself to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive harm.arm For more. information, go to P65Warnings.ca.gov.
The charge relay will automatically select whether your home and starting battery are connected in parallel during engine operation, or are isolated during sailing or at anchor...
PRODUCT ID: 30594
SKU: NVN-30594
CSKU: CWR-30594
REWRITE: 41705-blue-sea-7610-120-amp-. si-series-automatic
MPN: 7610
UPC: 632085076108
ASIN: B000OTIPDQ
WSKU: BSS7610
SSKU: BS-7610
KSKU: B6Z7610BSS
GSKU: 7610
MSKU:
LSKU : 661-7610
NAME: Blue Sea 7610 SI 120 A Series Automatic Load Relay
EX_NAME: BLUE SEA 7610 SI 120 A SERIES SOLENOID 12/24 V ACR
PTITLE: Blue Sea 7610 SI 120 A Series Automatic Load Relay
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Automatic Charging Relay Blue Sea Systems (ACR) )
BlueSea Systems Si-acr Automatic Load Relay, 12/24 V DC/120 A, Size: Medium
Sports
Gtags:
| Relays |
GSpecs:
Blue Sea 7610 120 Amp SI Series Automatic Charging Relay Product Description SI Series 120 Amp 12/24V ACR Solenoid
Automatically combines batteries during charging, isolates batteries when discharging and when starting the engines. Start-up isolation helps temporarily isolate household loads from the motor circuit while the motor is starting to protect sensitive electronic components from sags and spikes. Remote LED indicates ACR states - requires optional LED.
Blue Sea 7610BSS Attributes- Function: Combine batteries during charging, isolates Batteries when discharging and when starting engines
- Operating voltage: 12/24 Volt
- Amps Rating: 175 milliamps
- Length (IN): 3 -1/2 inch
- Width (IN): 3.88 inches
- Height (IN): 1.98 inches
- Mounting Type: Panel
- Protects sensitive electronic components by temporarily isolating household loads from the motor circuit while starting the engine
- Designed for 12 or 24 volt systems
- Hermetically sealed, vapor proof contacts
- Safe protected against ignition for installation on board gasoline boats
- Supports high output alternators up to 120 amps
- Dual sensing
- No supplier warranty
- 990170140.pdf
7610
SI 120 A series automatic load relay
- Allows domestic loads to be temporarily isolated from the motor circuit during motor starting for proprotect sensitive electronic components
- Automatically combines batteries during charge cycle and isolates them when discharged
- 12/24V auto-ranging voltage input
- Waterproof IP67 - temporary immersion for 30 minutes
- Ignition protected - safe for installation on board gasoline boats
- Remote LED output indicates relay status far away of the ACR
- LED indicator indicates when batteries are combined
- LED flashes undervoltage lock and start lock
- Supports high output alternators up to 120 amps
- Included with ADD A BATTERY dual circuit system
- Automatically combines battery banks during the charge cycle and isolates when discharging
- Protected ignition - safe for installation on board gasoline boats
- Activates from any charging source: alternators, chargersbattery or solar panels
- Hermetic / vapor-tight contacts
- Side and bottom cutouts for power cable connections
- Clip-on cover protects and insulates terminal connections
- Tin-plated copper studs for maximum corrosion resistance
- 7/8" (22.22 mm) stud length to accept multiple cable terminals
- 1/4" x 0.031"minal male quick connector for ground and remote LED and start interrupt
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.
The charge relay will automatically select whether your home and starter battery are connected in parallelele during engine operation, or are isolated during navigation or at anchor. . ...
Blue Sea 7610 120 Amp SI Series Automatic Load Relay Related ProductsAncor Red 2 AWG Battery Cable - Sold by the Foot
Ancor Red 1 AWG Battery Cable - Sold by the Foot
br />Ancor Red Battery Cable 1/0 AWG - Sold by the Foot
Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2 Pack
Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - Pack of 2
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - Pack of 2
Freq. Frequently Asked Questions (FAQ) about the Blue Sea 7610 120 Amp SI Series Automatic Load Relay Who is Blue Sea Systems?
How to describe the Blue Sea 7610 120 Amp SI Series Automatic Load Relay?
What is this? the operating voltage of the product?
What is the operating voltage of the product?
What is the type of product?
How manybanks can charge this product?
What is the Dimensions and weight of the Blue Sea 7610 120 A SI Series Automatic Charging Relay?
What is the mounting type of the product?
What is the amperage rating of the product?
Is this product receive only or receive/transmit?
What are the manufacturer's ratings for the Blue Sea 7610 120A SI Series Automatic Load Relay?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea wants to satisfy its distributiontors, resellers and ultimately the retail customer by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7610 120 Amp SI-Series Automatic Load Relay? SI Series Solenoid 120 A 12/24 V ACR
- Prevents damage to sensitive electronic componentswhen starting the engine
- Combine battery banks for charging
- Automatically isolates household loads from the engine circuit
- li>
The Blue Sea Systems 7610 Automatic Load Relay is a 12/24 volt DC 120 amp relay designed for 12 or 24 volt systems. This automatic load relay is designed to protect sensitive electronic devices by temporarily isolating household loads from the motor circuit while the engine is starting.
Get the power you need with the Blue Sea 7610 120 Amp. This inverter is perfect for running your 12/24 volt DC devices and comes with 1/0 AWG wire and 3/8 inch-16 stud. The Blue Sea 7610 120 Amp is also ideal for RVs, boats and other applications. This requires 120 amps continuous or 210 amps intermittent.
What is the operating voltage of the product? 12/24 V DC- Prevents endamage sensitive electronic components when starting the engine
- Combine battery banks for charging
- Automatically isolates household loads from the engine circuit
- The SI- ACR is designed to protect sensitive electronic components by temporarily isolating household loads from the motor circuit during engine starting.
- It is designed for 12 or 24 volt systems and is typically used to connect household loads. 120 A.
- This relay is designed to protect sensitive electronic components by temporarily isolating household loads from the motor circuit during engine starting.
- The relay is specially designed for systems 12 or 24 volts.
- >
- For 12 or 24 volt systems
- Automatically protects sensitive electronic components by temporarily isolating household loads from the motor circuit during engine starting
- Designed for 12 and 24 volt systems
- High power for high performance
- 1/0 AWG wire size for high voltage and current
- 3 stud/ 8 inch-16 for a wide range of uses
- The perfect inverter for your RV, boat or trailer.
- Get the right power for your needs with 120 amps in continuous and 210 amps intermittent.
- Comes with 1/0 AWG wire size, perfect for any application requiring higher amperage.
- Includes 3/8 studs inches to easily connect to battery terminals. >
- High voltage, high current power delivery
- Designed for use in industrial environments
- Construction rugged
- Designed for 12V or 24V systems
- 12/24V auto-ranging voltage input
- ISO approvals 8846 and CE
- Meets SAE J1171 protection requirementsbetween external ignition
- Dual detection
- Automatically combines batteries during charging
- Isolates batteries during engine starting and when not in use charging
- Detects charging source on either battery bank
- Undervoltage lockout does not close when low reached. battery is less than 10.8V to 12V (21.6V to 24V) in operation
- Sealed/vapour-tight contacts
- Protected ignition for use at onboard gasoline boats
- Waterproof to IP67 for temporary immersion for 30 minutes
Save $60 on the Blue Sea 7610 120 Amp SI Series Automatic Load Relay> for only $85 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7610 120A SI Series Automatic Load Relay Technical Specifications
| Type: | Electric | Battery Management |
|---|---|
| Vendor: | Blue Sea Systems |
| Weight: | 1.2 lbs |
| Product manual: | Download PDF |
| Shipping Weight: | 1.2 lbs |
|---|---|
| Box sizes: | 3.00 (h) x 7.00 (w) x 9.00 (w) |
| Cubic feet: | 189.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping terms, please see our Shipping Policy and you can find our Return and Refund Policy here.
- Blue Sea 7608 BatteryLink Charger (North America) - 12 V - 20 A - 2 banks
- Blue Sea 7605 BatteryLink charger - 10 A - 2 banks
- Blue Sea 7601 DC Mini ACR Automatic Load Relay - 65 A
- Blue Sea 7577 Series A Raised Toggle Circuit Breaker - Double Pole - 50A
- Blue Sea 7575 Series A Raised Toggle Circuit Breaker - 2 Pole - 32A
- Blue Sea 7574 Series A Raised Toggle Circuit Breaker - 2 Pole - 30A
- Blue Sea 7549 Series C flat toggle circuit breaker - single pole - 100 A
