Sale!

Bow thruster VETUS BOW PRO 651 65KGF - 12V

$187

SKU: Bow thruster VETUS BOW PRO 651 65KGF - 12V
Category:

Bow thruster VETUS BOW PRO 651 65KGF - 12V Boat Outfitting

BOW PRO 651 65KGF bow thruster - 12V

Our BOW PRO thrusters are equipped with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has an indefinite autonomy*! The induction (AC) motor is controlled by the VETUS MCV motor controller. This in-house designed motor controller can handle 12V, 24V and AC motors, making the new bow thruster suitable for almost any boat!

The BOW PRO thruster is controlled by a Proprietary CANBUS protocol. There are two different panels available for this thruster; a fully proportional base panel and a fully proportional panel with locking function. This allows the boat to be moored without using ropes. Letting passengers board your ship has never been easier! Evolution must continue on a set of good propertiessummers, there are therefore similarities with its predecessors: the very silent propeller blades and the profiled tailpiece remain. Upgrading a BOW PRO thruster is therefore child's play because the new motor is interchangeable with the tailpiece and bridle from our range of thrusters.

Features:

  • Size range boat height: 34 feet - 36 feet
  • Thrust in pounds force: 143 lbs
  • Engine horsepower: 4
  • Tunnel - Center line below the line of floatation: 185MM
  • Voltage: 12V
  • Precision proportional control
  • Rated endurance runtime - up to 10 minutes (depending on model) at full power
  • Maintenance-free brushless motor
  • Sealed ingress protection construction - sealed motor for improved corrosion resistancen in wet hold environments
  • Built-in protection against overheating and low battery voltage
  • Suitable for very demanding applications (e.g. for use in charter vessels and charter)




VETUS bow thruster zinc washer anode device-75/95 KGF, with hardware VETUS zinc washer-anode bow thruster Specification. : Material: Zinc Box Size: 1" H x 3" W x 4" L WT: 0.35...
PRODUCT ID: 78323
SKU: NVN-78323
CSKU: CWR- 78323
REWRITE: 89434-vetus-bow-pro-651-bow-thruster-65kgf
MPN: BOWA0651
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VETUS BOW PRO 651 Bow Thruster 65KGF - 12V
EX_NAME: VETUS BOW PRO 651 Bow Thruster 65KGF 12V
PTITLE: VETUS BOW PRO 651 Bow Thruster 65KGF - 12V
TYPE : Equipment for boats | Bow thrusters
SELLER: VETUS
SPORTING GOODS> OUTDOOR LEISURE> BOATING AND WATER SPORTS


Set of zinc washer anodes for TECNOSEAL VETUS bow thruster - 75/95 KGF with hardware

Gtags:

GSpecs:

VETUS BOW PRO 651 65KGF bow thruster - 12V Product description

BOW PRO 651 65KGF bow thruster

Our BOW PRO thrusters are equipped with advanced technology proven induction. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has an indefinite autonomy*! The induction (AC) motor is controlled by the VETUS MCV motor controller. This in-house designed motor controller can handle 12V, 24V and AC motors, making the new bow thruster suitable for almost any boat!

The BOW PRO thruster is controlled by a Proprietary CANBUS protocol. There are two different panels available for this thruster; a fully proportional base panel and a fully proportional panel with locking function. This allows the boat to be moored without using ropes. Letting passengers board your ship has never been easiere ! The evolution must continue on a set of good properties, so there are similarities with its predecessors: all that remains are its very silent propeller blades and its profiled tailpiece. Upgrading a BOW PRO thruster is therefore child's play as the new motor is interchangeable with the tailpiece and flange of our range of thrusters.

Features:

  • Boat size range: 34 feet - 36 feet
  • Thrust in pounds force: 143 lbs
  • Motor power: 4
  • Tunnel - Center line below the waterline: 185 MM
  • Voltage: 12 V
  • Proportional control of precision
  • Rated endurance time - up to 10 minutes (depending on model) at full power
  • Maintenance-free brushless motor
  • Protective sealed construction contre infiltration - sealed motor for improved corrosion resistance in wet bilge environments
  • Built-in protection against overheating and low battery voltage
  • Suitable for very demanding (e.g. for use in rental and arter vessels)