C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair Hunting & Fishing

Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair

Includes:

Two carbon fiber stabilizers Stabilizer posts with integrated double stainless steel eyes
Eight locking screws
Two aluminum base sleeves
Carbon fiber storage bag net

Features:

Integrated 316 stainless steel double halyard eyes to pass multiple halyards
Extra-long non-conductive tip to prevent tangling
Strong fiberglass base for added strength and stability
Designed to prevent galvanic reactions
Taper-Lok joints create rigid, one-piece posts
Straighter and stronger than fiberglass and aluminum posts
Sections slide together in the others for foldable storage

Our Gen3 posts are designed tor prevent galvanic reactions, a common problem with anything made from carbon fiber, keeping your poles looking good and performing well. The base of the poles is made from solid fiberglass for greater strength and stability.

Taper-Lok joints are used to secure the pole in its extended position. Taper-Lok joints fit tightly to create a single, one-piece rigid post that is much straighter than fiberglass or aluminum posts. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide into each other, collapsing the post. Taper-Lok gives you all the benefits of a single stiff pole with the added convenience of easy storage.

Our Gen3 carbon fiber poles have an extra-long non-conductive tip designed to prevent line tangles in therough waters. . These masts have integrated two 316 stainless steel halyard eyes designed to pass multiple halyards on a single mast. The smooth design of these grommets also prevents any possibility of snagging.

The base of this post fits 1-1/2" post brackets, which is the typical size for steel brackets. stainless steel. There are two aluminum sleeve attachments included. Do not fit the base of the poles, allowing them to fit 1-5/8" rod holders, which is the typical size. aluminum rod holders.

This set also includes a mesh bag for you to carry and store. posts.

Smith products are made from high quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will satisfy your...
PRODUCT ID: 80694
SKU: NVN-80694
CSKU: CWR-80694
REWRITEIRE: 91805-c-e-smith-gen3-carbon-fiber-outriggers
MPN: 56551
UPC: 768296010751
ASIN: B08BV4XVDK
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair
NAME_EX: CE SMITH GEN3 BLACK Carbon Fiber Stabilizers 22' PAIR
PTITLE: C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair
TYPE: Hunting and Fishing |
SELLER: C.E. Smith
SPORTING GOODS> OUTDOOR RECREATION> FISHING
Sports

C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair 56551
Sports
Gtags:

Aluminium
22 inches

GSpecs:

C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair Product Description

Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair

Includes:

Two carbon fiber stabilizing posts with integrated double stainless steel eyes
- li>
- Eight locking screws
- Two aluminum base sleeves
- Mesh storage bag
Features:
- Integrated double halyard 316 stainless steel grommets to pass multiple halyards
- Extra-long non-conductive tip to prevent tangling
- Strong fiberglass base for greater strength and stability
- Designed to prevent galvanic reactions
- Taper-Lok joints create rigid, one-piece posts
- Straighter and stronger than fiberglass and aluminum posts
- Sections slide into each other for foldable storage
Our Gen3 poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which holds your sticks in placeok and performing at its best. The base of the posts is made of solid fiberglass for greater strength and stability.

Taper-Lok joints are used to secure the post in its extended position. Taper-Lok joints fit tightly to create a single, one-piece rigid post that is much straighter than fiberglass or aluminum posts. When ready for storage, simply unscrew and remove the locking pin from each collar and the fully rigid sections slide into each other, collapsing the post. Taper-Lok gives you all the benefits of a single stiff pole with the added convenience of easy storage.

Our fiberglass polesCarbon Gen3 have an extra-long non-conductive tip designed to prevent line tangles in rough water. . These masts have integrated two 316 stainless steel halyard eyes designed to pass multiple halyards on a single mast. The smooth design of these grommets also prevents any possibility of snagging.

The base of this post fits 1-1/2" post brackets, which is typical size for steel brackets Two aluminum mounting sleeves are included that fit over the base of the poles, allowing them to fit 1-5/8" pole holders, which is the typical size for rod holders. aluminum.

This set also includes a mesh bag to carry and store your poles.

Smith products are made from high quality materials and can provide you with many years of service. Use the most advanced technology to design and support itcounts the customer. It will satisfy your...

Frequently Asked Questions (FAQ) about C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair Who is the C.E. Smith?
How to describe the C.E. Smith Gen3 carbon fiber stabilizers - Black - 22" - Pair?
Who is the C.E. Smith? C.E. Smithis committed to providing innovative products and excellent service to manufacturing and aftermarket accounts. The entire C.E Smith team is dedicated to providing high quality products and efficient, responsive service that customers deserve.How to Describe C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair ?Smith products are made of high quality materials and can provide you with many years of service. Use the most advanced technology to design and consider your...
The integrated double halyards are made from 316 stainless steel, so you know they will last a long time.
The masts can be adjusted to 22" in height and the base sleeves are aluminum to help them stay anchored in windy conditions.

Gen3 carbon fiber stabilizers are made with the latest carbon fiber technology and measure 22" tall.
The stabilizers come with two carbon fiber stabilizers. posts, eight locking screws and two aluminum base sleeves.
They also include a mesh storage bag so you can keep them safe when not in use.

Gen3 carbon fiber stabilizers are the next evolution of stand-up paddleboard stabilizers.
Constructed of ultra strong materialses and lightweight and durable carbon fiber.
Comes with integrated double halyards for easy installation, as well as a mesh bag for storing them.

Save $915 when purchasing the C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair for only $1919 from NVN Marine! Free same day delivery before 3pm. C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair Technical specifications

Type:	Hunting and fishing \| Stabilizers
Seller:	C.E. Smith
Weight:	27.3 lbs

C.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Pair of User ReviewsC.E. Smith Gen3 Carbon Fiber Stabilizers - Black - 22" - Shipping and Returns Pair

Shipping weight:	27.3 lbs
Tailboxes:	5.00 (h) x 9.00 (w) x 91.00 (w)
Cubic feet:	4095.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.