Egis XD Series Single Flex 2 Relay-ACR - DTM Connector Bestsellers

XD-ACR Series Single Flex 2 Relay - DTM Connector

This Egis relay offers a 35-75% reduction in mounting space and product weight via an advanced bistable solenoid. design and multiple solenoid assemblies that replace common electrical system configurations. The relay is expandable with link and cross-link bus bars to additional double, triple or single XD relays. Additionally, the relay supports 2 or 3 battery systems with standard busbar interconnect accessories.

Applications:

Improved replacement/alternative to solenoids and old remote battery disconnect solenoids; Wire-to-wire compatible with Blue Sea ML-Solenoid and ML-Remote Battery Switch products.
Front-facing entry studs make it easy to land large wires, and a protective cover protection with recesses forIntegrated labels allow for easy identification while providing anti-contact, short-circuit protection

Features:

Resistant construction -bullet sealed, IP67/IP6K9K and high temperature electronics and materials allow mounting anywhere; Stainless Steel Cable Lug Studs; Large mounting holes accept 1/4-20/M6 mounting hardware
Simple programmability via simple DIP switches allows each relay function significant flexibility for OEMs and installers
Plug-and-play compatible with existing competitive products: Single, dual and triple relay options are available with DTM/ATM connector pins for pin compatibility with ML series bistable relays
90-95% less out-of-state current compared to competitive products. and system solutions that require multiple devicesreils for similar features

Specifications:

Total DC Amps: 500
Current maximum starting current (amps): 1,500
Mechanical switching life: 1,000,000 cycles
Voltage range (VCC): 8-36
Disabled state Current consumption (mA): 1.3
State change current: 5A at 12VDC; 3 A at 24 VDC

Focal Features:

LED Status Display

The easy-to-see front LED indicator provides visual device status, and the remote LED mirrors the local LED on the device.

40 circuit label sheet included

Convenient recesses for the included weatherproof label set make it easy to identify circuits and relay. Blank labels for custom applications.

Protective cover included

Proprotects terminal studs and edges of cable terminals from accidental short circuits to each other or to ground.

Integrated vent

High quality Gortex vents regulate the internal pressure of the device to eliminate moisture infiltration through seals and ensure long product life in harsh environments.

Stainless steel hardware

Corrosion is not a problem with quality stainless steel studs and self-locking flange nuts.

Programmable

By dip switches located under the protective cover. An easy-to-use setup guide on the reverse makes it easy to configure custom settings for a wide variety of applications.

Small footprint

XD relays deliver high amperage in a smaller package than competing solutions, reducingif installation space requirements at minimum.

PRODUCT ID: 103502
SKU: NVN-103502
CSKU: CWR-103502
REWRITE: 114613 -egis-xd-series-single-flex-2-relay-acr
MPN: 8810-1600
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME_EX:
PTITLE: Egis XD Series Single Flex 2 Relay-ACR - Connector DTM
TYPE: Electric | Accessories
SELLER: Egis Mobile Electric
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> PARTS AND ACCESSORIES FOR WATERCRAFT

Gtags:

GSpecs:

Egis XD Series Single Flex 2 Relay-ACR - DTM Connector Product Description

XD Series Single Flex 2 Relay-ACR - DTM Connector

This Egis relay provides a 35- 75% reduction in mounting space and product weight with an advanced bistable solenoid design and multiple solenoid assemblies that replace common electrical system configurations. The relay is expandable with link and cross-link bus bars to additional double, triple or single XD relays. Additionally, the relay supports 2 or 3 battery systems with standard busbar interconnect accessories.

Applications:

Improved replacement/alternative to solenoids and old remote battery disconnect solenoids; Wire-to-wire compatible with Blue Sea ML-Solenoid and ML-Remote Battery Switch products.
Front-facing inlet studs make it easylarge wire landing, and a protective cover with integrated label recesses allows for easy identification while providing anti-contact short circuit protection

Features:

Bulletproof construction, sealed to IP67/IP6K9K, and high temperature electronics and materials allow mounting anywhere; Stainless Steel Cable Lug Studs; Large mounting holes accept 1/4-20/M6 mounting hardware
Simple programmability via simple DIP switches allows each relay function significant flexibility for OEMs and installers
Plug-and-play compatible with existing competitive products: Single, dual and triple relay options are available with DTM/ATM connector pins for pin compatibility with ML series bistable relays
90 to 95% off-state current inless compared to competing products. and system solutions that require multiple devices for similar functionality

Specifications:

Total DC Amps: 500
Maximum starting current (amps): 1,500
Mechanical switching life: 1,000,000 cycles
Voltage range (VCC): 8 -36
Off state Current consumption (mA): 1.3
State change current: 5A at 12 VDC; 3A at 24 VDC

Focal Features:

LED Status Display

The easy-to-see front LED indicator provides visual status of the device, and the remote LED mirrors the local LED on the device.

40 circuit label sheet included

Convenient recesses for the included weatherproof label set make it easy to identify circuits and relay. Blank labelsfor custom applications.

Protective cover included

Protects terminal studs and cable terminal edges from accidental shorting with each other or with the earth.

Built-in vent

High-quality Gortex vents regulate the internal pressure of the device to eliminate moisture infiltration through seals and ensure long product life in harsh environments.

Stainless steel hardware

Corrosion is not a problem with Quality stainless steel studs and self-locking flange nuts.

Programmable

By dip switches located under the protective cover. An easy-to-use setup guide on the back makes it easy to configure custom settings for a wide variety of applications.

Reduced footprint

XD relays offert high amperage in a smaller package than competing solutions, reducing installation space requirements to a minimum.

Save $45 with the purchase of the Single Flex 2 Single Flex 2 Egis Relay - DTM Connector for only $95 from NVN Marine! Same day dispatch before 3 p.m. Egis XD Series Single Flex 2 Relay-ACR - DTM Connector Technical Specifications

Type:	Electrical \| Accessories
Supplier:	Egis Mobile Electric

Egis XD Series Single Flex 2 Relay-ACR - DT Connector User ReviewsMEgis Return