Furuno Autopilot Pump Marine Navigation & Instruments

Autopilot Pump, 12 V DC, 1.7 cubic inches per second (for ram sizes from 14 cubic inches to 25 cubic inches volume)

The PUMPHRP17-12 is a set of reversing pumps designed to interface with the NavPilot series autopilot. with a hydraulic steering system. The pump assembly includes a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation.

A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or tiller pumps. When the steering wheel (helm pump) is turned to port, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed to the port side of the steering cylinder. When the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump via the hydraulic lines.starboard ues.

One end of the cylinder is fixed and the other is connected to a steering arm, which is connected to a rudder shaft. With this connection to the helm arm, the linear movement of the ram to port is replaced by a rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction, with oil being pumped out of the starboard line and back through the port line.

If more than one bar pump is used, a return/fill line must be installed to connect the housings of all bar pumps together.

The output flow of the pump set determines the speed of the steering cylinder. The PUMPHRP17-12 produces 1.6 cu. in. of oil per second and requires 12V DC input.

This product can expose you to to chemicals known byState of California to cause cancer, birth defects, or other reproductive harm. For more information,

This product cannot be returned to the point of purchase. Please contact the manufacturer directly with any problems or concerns.

PUMPHRP17-12 is a reversible pump unit designed to connect NavPilot series autopilots to hydraulic steering systems. The pump assembly includes a reversible gear pump, which is a two-piece gear mounted in an eccentric ring. This allows for extremely quiet, reliable and precise operation. The hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps or steering pumps. As the steering wheel (helm pump) turns toward port, hydraulic oil is pumped into the port hydraulic steering line. The hOil is introduced into the intake port side of the steering cylinder. When the cylinder moves to the left, oil from the starboard side of the cylinder returns to the rudder pump via the starboard hydraulic line. One end of the cylinder is fixed, the other end is connected to the tiller, which is connected to the rudder shaft. Through the connection with the tiller, the linear movement of the cylinder towards the port becomes a rotational movement, which will turn the rudder and turn the ship towards the port. Moving the steering wheel to starboard will produce the same reaction, oil will be drawn in through the starboard line and returned through the port line. If multiple helmet pumps are used, a return/fill line must be installed to connect the housings of all helmet pumps together. The output flow of the pump set determines the rotation speed of the steering cylinder. PUMPHRP17-12 produces 1.6 cubic meters. The pressure of huile is .. per second and requires a 12 V DC input.
PRODUCT ID: 29929
SKU: NVN-29929
CSKU: CWR-29929
REWRITE: 41040-furuno-autopilot-pump
MPN: PUMPHRP17-12
UPC: 611679305077
br> br> ASIN: B000QJEL8C
WSKU: FURPUMPHRP1712
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Furuno Autopilot Pump
EX_NAME: FURUNO PUMP HRP17-12 F/500-21 RAM SIZES 14CI-25CI REPLACES
PTITER: Furuno Autopilot Pump
TYPE: Navigation & Marine Instruments | Autopilots
SELLER: Furuno
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERCRAFT PARTS & ACCESSORIES> POWERWATER STEERING PARTS> POWERWATER STEERING CABLES

Furuno NAVpilot 500 Series Autopilot Pump
Furuno Autopilot Pump

Gtags:

Furuno

GSpecs:

Furuno Autopilot Pump Product Description: Autopilot Pump, 12 VDC, 1.7 cubic inches per second (for ram sizes from 14 cubic inches to 25 cubic inches volume)

The PUMPHRP17-12 is a reversing pump assembly designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly includes a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation.

A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or tiller pumps. When the steering wheel (helm pump) is turned to port, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed to the port side of the steering cylinder. When the cylinder moves to port, the oil on the starboard side of the veerin returns to the helm pump via the starboard hydraulic lines.

One end of the cylinder is fixed and the other is connected to a helm arm, which is connected to a rudder shaft. With this connection to the helm arm, the linear movement of the ram to port is replaced by a rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction, with oil being pumped out of the starboard line and back through the port line.

If more than one bar pump is used, a return/fill line must be installed to connect the housings of all bar pumps together.

The output flow of the pump set determines the speed of the steering cylinder. The PUMPHRP17-12 produces 1.6 cu. in. of oil per second and requires 12V DC input.

This product can expose you to chemicals known to the State of California pmay cause cancer, birth defects, or other reproductive harm. For more information,

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PUMPHRP17-12 is a reversible pump unit designed to connect NavPilot series autopilots to hydraulic steering systems. The pump assembly includes a reversible gear pump, which is a two-piece gear mounted in an eccentric ring. This allows for extremely quiet, reliable and precise operation. The hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps or steering pumps. As the steering wheel (helm pump) turns toward port, hydraulic oil is pumped into the port hydraulic steering line. The oil is introducedte on the steering cylinder intake port side. When the cylinder moves to the left, oil from the starboard side of the cylinder returns to the rudder pump via the starboard hydraulic line. One end of the cylinder is fixed, the other end is connected to the tiller, which is connected to the rudder shaft. Through the connection with the tiller, the linear movement of the cylinder towards the port becomes a rotational movement, which will turn the rudder and turn the ship towards the port. Moving the steering wheel to starboard will produce the same reaction, oil will be drawn in through the starboard line and returned through the port line. If multiple helmet pumps are used, a return/fill line must be installed to connect the housings of all helmet pumps together. The output flow of the pump set determines the rotation speed of the steering cylinder. PUMPHRP17-12 produces 1.6 cubic meters. Oil pressure is .. per secondof and requires 12V DC input.

Frequently Asked Questions (FAQ) about Furuno Autopilot Pump Who is Furuno?
How to describe Furuno Autopilot Pump?
What is the product type?
Who is Furuno? Furuno is a world-renowned manufacturer and leader in the field of marine electronics that produces an abundance of products. With a wide selection of high-end commercial grade sonars up to the compact Black Box sonar, Furuno has one to fit almost any vessel. When it comes to communications, optimal performance and complete reliability are essential. This is why Furuno radio equipment is robust and reliable. How to describe the Furuno autopilot pump? PUMPHRP17-12 is a reversible pump unit designed to connect NavPilot series autopilots to hydraulic steering systems. Pump assembly includes gear pumpreversible gear, which is a two-piece gear mounted in an eccentric ring. This allows for extremely quiet, reliable and precise operation. The hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps or steering pumps. As the steering wheel (helm pump) turns toward port, hydraulic oil is pumped into the port hydraulic steering line. Oil is introduced into the inlet port side of the steering cylinder. When the cylinder moves to the left, the oil on the starboard side of the cylinder returns to the rudder pump via the starboard hydraulic line. One end of the cylinder is fixed, the other end is connected to the tiller, which is connected to the rudder shaft. Through the connection with the tiller, the linear movement of the cylinder towards the port becomes a rotational movement, which will turn the rudder and turn the vessel towards the port. Move itflying to starboard will produce the same reaction, the oil will be sucked in through the starboard line and returned through the port line. If multiple helmet pumps are used, a return/fill line must be installed to connect the housings of all helmet pumps together. The output flow of the pump set determines the rotation speed of the steering cylinder. PUMPHRP17-12 produces 1.6 cubic meters. Oil pressure is in .. per second and requires 12V DC input. What is the product type? Pumps/Drives

$65

Furuno Autopilot Pump

744 $

Type:	Navigation and Marine Instruments \| Autopilots
Supplier:	Furuno
Poids:	10.0 lbs
Type:	Push-ups/workouts
Product Manual:	Download PDF
Product Installation:	Download PDF

Shipping Weight:	10.0 lbs
Box sizes:	6.00 (h) x 6.00 (w) x 10.00 (w)
Cubic feet:	360.0
P65:	Yes

For a detailed shipping policy, please view our shipping policy and you can find our return policy and refund here.