Furuno B265LH Bronze Through Hole CHIRP Transducer - 12 Pin Marine Navigation & Instruments

Traditional marine sounders operate at discrete frequencies such as 50 kilohertz and 200 kilohertz, use relatively short duration transmission pulses and narrow-band sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmission pulse from a wideband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also greater than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer and Furuno's superior digital signal processing provides significantly improved fish and bottom detection.

Furuno B265LH12P Attributes

Location mounting: Thru-hull mounting
Number of pinses: 12 pin
Depth: 3,000 feet
Rated power: 1,000 watts
Frequency range: 42 to 65 kHz for low CHIRP and 130 At 210kHz for high CHIRP
Supported angle: 25 X 16/10 X 6 degrees Beamwidth
Cable length: 39.3 feet

Furuno B265LH12P Features and Benefits

Operate at discrete frequencies such as 50 kilohertz and 200 kilohertz
Equivalent sound energy transmitted in water is 10 to 1,000 times greater than that of a conventional marine fish finder
Echo energy The return to the transducer is also higher than that generated by a conventional transducer.
The combination of CHIRP, a Furuno's broadband transducer and superior digital signal processing results in significantly increased fish and bottom detection
3-year limited warranty

CHIRP through-hull transducere B265LH Bronze - 12 pin

Bronze, CHIRP thru-hull transducer with 12 pin connector, low frequency: 42-65 kHz, high frequency: 130-210 kHz.

The B265LH is a bronze through-hole CHIRP transducer for use with Furuno CHIRP wideband fish finders. . The B265LH comes with a high-speed fairing block.

Traditional marine echo sounders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short duration transmission pulses and sonar transducers narrow band. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmission pulse from a wideband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also suplower than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer, and Furuno's superior digital signal processing, provides significantly improved fish and bottom detection.

The B265LH CHIRPS on the bands following frequencies:

Low frequency: 42-65 kHz
High frequency: 130-210 kHz

Frequency: 42-65/ 130-210kHz Maximum power: 1000W. Can accommodate Deadrise: 0°20°. The B265LH is a bronze through-hole CHIRP sensor, which can be used in conjunction with Furuno's CHIRP wideband fish sensor.
PRODUCT ID: 83658
SKU: NVN-83658
CSKU: CWR-83658
REWRITE: 94769-furuno-b265lh-bronze-thru-hull-chirp-transducer
MPN: B265LH-12P
UPC: 611679388971
ASIN: B08CHLKY33
WSKU:
SSKU:
KSKU: FURB265LH12P
GSKU:
MSKU:
LSKU:
NAME: Furuno B265LH Bronze Through-Hull CHIRP Transducer -12 pin
NAME_EX: FURUNO B265LH BRONZE THROUGH-HULL CHIRP TRANSDUCER 12 PIN
br>PTITLE: Furuno B265LH Bronze Thru-Hull CHIRP Transducer - 12 pin
TYPE: Navigation & Marine Instruments | Transducers
SELLER: Furuno
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS

Furuno B265LH Bronze Thru-Through Chirp Transducer - 12 Pins
Furuno B265LH Bronze Through-Through CHIRP Transducer - 12 Pin

Gtags:

Furuno

GSpecs:

Furuno B265LH Bronze Thru-Through CHIRP Transducer - 12 Pin Product Description

Traditional marine fish finders operate at discrete frequencies such as 50 kilohertz and 200 kilohertz, use relatively short duration transmission pulses and band sonar transducers narrow. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmission pulse from a wideband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also greater than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer and Furuno's superior digital signal processing, significantly improves fish and bottom detection.

Furuno B265LH12P Attributes

Mounting location: Through-hole mounting
Number of pins: 12 pin
Depth: 3,000 feet
Rated power: 1000 watts
Frequency range: 42 to 65 kHz for low CHIRP and 130 to 210 kHz for high CHIRP
Supported angle: 25 X 16/10 X 6 degree beam width
Cable Length: 39.3 feet

Furuno B265LH12P Features and Benefits

Operates at discrete frequencies such as 50 kilohertz and 200 kilohertz
Equivalent sound energy Transmission in water is 10 to 1,000 times greater than that of a conventional marine fish finder.
Echo energy returned to the transducer is also greater than that generated by a transconventional transducer
Combination of CHIRP, a wideband transducer and Furuno's superior digital signal processing provide significantly improved fish and bottom detection.
Limited warranty 3 years

B265LH Through-hole CHIRP bronze transducer - 12 pin

CHIRP through-hole bronze transducer with 12-pin connector, low frequency : 42-65 kHz, high frequency: 130-210 kHz.

The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno CHIRP wideband fish finders. The B265LH comes with a high-speed fairing block.

Traditional marine echo sounders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short duration transmission pulses and sonar transducers narrow band. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise scanning patternmany frequencies within a long duration transmission pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also greater than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer and Furuno's superior digital signal processing results in significantly increased fish and bottom detection.

The B265LH CHIRPS on the following bandwidths :

Low frequency: 42- 65 kHz
High frequency: 130-210 kHz

Frequency: 42-65/130-210 kHz Maximum power: 1000 W. Accommodates Deadrise: 0°20°. The B265LH is a bronze through-hole CHIRP sensor, which can be used in conjunction with Furuno's CHIRP wideband fish sensor.

CHIRP tr transducerFuruno B265LH Bronze Through Hole Transducer - 12 Pin Related Products

Frequently Asked Questions (FAQ) about Furuno B265LH Bronze Through Hole CHIRP Transducer - 12 Pin Who is Furuno?
How Describe the Furuno B265LH Bronze Through Hole CHIRP Transducer - 12 Pin?
What is the power rating of the product?
What is the cable length?
Who is the Furuno? Furuno is a world-renowned manufacturer and leader in the field of marine electronics that produces an abundance of products. With a large selection of high-end commercial grade sonar to the compact Black Box sonar, Furuno offers one that fits almost any vessel. When it comes to communications, optimal performance and complete reliability are essential. This is why Furuno radio equipment is robust and reliable. How to Describe the Furuno B265LH Bronze Through-Hull CHIRP Transducer - 12 Pin ? Frequency: 42-65/130-210kHz Maximum power: 1000W. Can accommodate Deadrise: 0°20°. The B265LH is a bronze through-hole CHIRP transducer, which can be used in conjunction with Furuno's CHIRP wideband fish sensor.

The B265LH is a bronze through-hole CHIRP transducer, which can be used in conjunction with Furuno's CHIRP wideband fish sensor. use with Furuno's CHIRP wideband fish finder.
It provides coverage of the full frequency spectrum for finding fish and is ideal for use in shallow waters. deep or when the fish are not near the bottom. .
This transducer features a low frequency range of 42 to 65 kHz and a high frequency range of 130 to 210 kHz.

The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP wideband fish finder.
This 12-pin through-hull transducer is designed to operate in bass and high frequencies between 42 et 210 kHz.
It features a bronze cone, which provides increased durability and longevity, even when exposed to harsh saltwater environments.

This through-hole transducer is perfect for deep sea fishing.
The B265LH is a bronze CHIRP through-hole transducer for use with the CHIRP Wideband Fish Finder from Furuno.
The B265LH offers the best of both worlds, a low frequency range of 42 to 65 kHz and a high frequency range of 130 to 210 kHz.

What is the power rating of the product? 1000 watts

The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP wideband fish finder.
It provides full frequency spectrum coverage fish finder and is ideal for use in shallow water or where fish are not near the bottom.
This transducer features a range ofe low frequencies of 42 to 65 kHz and a high frequency range of 130 to 210 kHz.
The B265LH is a bronze through-hole CHIRP transducer for use with Furuno's CHIRP wideband fish finder. .
This 12-pin through-hole transducer is designed to operate in the low and high frequencies between 42 and 210 kHz.
It features a bronze cone, which provides increased durability and longevity. even when exposed to harsh saltwater environments.
This through-hull transducer is perfect for deep sea fishing.
The B265LH is a through-hull CHIRP transducer -bronze shell for use with the Furuno CHIRP. Wideband fish finder.
The B265LH offers the best of both worlds, a low frequency range of 42 to 65 kHz and a high frequency range of 130 to 210 kHz.

What is it? the length of the cable? 39.3 feet

Save 15$0 when you purchase the Furuno B265LH Bronze Thru-Through CHIRP Transducer - 12 Pin for only $1,449 b> from NVN Marine! Free same day delivery before 3 p.m. Furuno B265LH Bronze Thru-Thru CHIRP Transducer - 12-Pin Technical Specifications

Type:	Marine Navigation & Instruments \| Transducers
Supplier:	Furuno
Weight:	24.0 lbs

Furuno B265LH Bronze Through-shell CHIRP Transducer - 12 pin User ReviewsFuruno B265LH Bronze Through Hole CHIRP Transducer - 12 Pin Shipping & Returns

Shipping Weight:	24.0 lbs
Box sizes:	7.00 (h) x 19.00 (w) x 26.00 (w)
Cubic feet:	3458.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our return and refund policy here.