Furuno B265LH Through-Hull CHIRP Transducer Marine Navigation & Instruments

Traditional marine sounders operate at discrete frequencies such as 50 kilohertz and 200 kilohertz, use relatively short duration transmission pulses and narrow-band sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmission pulse from a wideband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also greater than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer and Furuno's superior digital signal processing provides significantly improved fish and bottom detection.

Furuno B265LH Attributes

Location Mounting: Thru-hull mounting
Number of pins: bare wire
Depth: 3,000 feet
Rated power: 1,000 watts
Frequency range: 42 to 65 kHz for low CHIRP and 130 Au at 210kHz for high CHIRP
Angle supported: 25 X 16/10 X 6 degrees Beamwidth
Cable length: 39.3 feet

Furuno B265LH Features and Benefits

Bronze through-hole CHIRP transducer for use with Furuno CHIRP wideband fish finders
Uses a precise sweep pattern of many frequencies in one transmit pulse long duration from a broadband transducer
Furuno's superior digital signal processing significantly improves fish and seabed detection.
Energy equivalent sound transmitted in water is 10 to 1,000 times greater than that of a conventional marine fish finder
Limited to 3 1 year warranty

B265LH (low and highfrequency)

Fast response water depth and temperature sensor
Low-CHIRPS from 42 kHz to 65 kHz , beamwidth from 25° to 16°
High-CHIRPS from 130 kHz to 210 kHz, beamwidth from 10° to 6°
103 kHz of total bandwidth from a single transducer
Covers the popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
Fishing Profile: Inshore and Offshore Commercial and Recreational Fishing (Deep Water Canyon and Seamount Tracking)
Bronze Transducer Housing with High Performance Shroud
Boat size: 8 M (25') and above
Hull type: fiberglass or wood

CHIRP TECHNOLOGY

5 to 10 times greater detail and resolution
10 to 1,000 times more energy on targets
br>
Accuracy up to 3,000 M (10,000 ft)
Separatiwe specify between baitfish and gamefish
Superior performance in noisy environments
Improved bottom tracking at high boat speeds

Maximum power: 1000 W. Can accommodate Deadrise: 0°20°. The B265LH is a copper through-hole CHIRP sensor that can be used in conjunction with Furuno's CHIRP wideband fish finder. Complete B265LH...
PRODUCT ID: 49182
SKU: NVN-49182
CSKU: CWR-49182
REWRITE: 60293-furuno-b265lh-thru-hull-chirp-transducer
MPN : B265LH
UPC: 6116793520572
ASIN: B0108LUCX0
WSKU:
SSKU:
KSKU: FURB265LH
GSKU:
MSKU:
LSKU:
NAME: Furuno B265LH Through Hull CHIRP Transducer
NAME_EX: FURUNO B265LH BARE WIRE CHIRP TRANSDUCER
PTITLE: Furuno B265LH Through Hull CHIRP Transducer
TYPE: Marine Navigation & Instruments | Transducers
SELLER: Furuno
ELECTRONICS>MARINE ELECTRONICS> FISH FINDERS

Furuno B265LH Thru-Hull Chirp Transducer
Furuno B265LH Thru-Hull CHIRP Transducer

Gtags:

Furuno

GSpecs:

Furuno B265LH Through-Through CHIRP Transducer Product Description

Traditional marine fish finders operate at discrete frequencies such as 50 kilohertz and 200 kilohertz, use relatively short duration transmission pulses and narrow band sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmission pulse from a wideband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than that of a conventional marine echo sounder. The echo energy returned to the transducer is also greater than that generated by a conventional transducer. The combination of CHIRP, a wideband transducer, and Furuno's superior digital signal processing provides significantly improved fish and bottom detection.

Furuno B26 Attributes5LH

Mounting location: Through-hole mounting
Number of pins: Bare wire
Depth: 3,000 feet
Rated power: 1000 watts
Frequency range:
Supported angle: 25 x 16/10 x 6 degree beam width
Beam length cable: 39.3 feet

Furuno B265LH Features and Benefits

Bronze through-hole CHIRP transducer for use with wide angle fish finders Furuno CHIRP band
Uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a wide-band transducer
Superior digital processing of the Furuno signal results in detectionSignificantly increased detection of fish and water
Equivalent sound energy transmitted through water is 10 to 1,000 times greater than a conventional marine fish finder
Limited warranty 3 years

B265LH (low and high frequency)

Fast response depth and water temperature sensor
Low-CHIRPS from 42 kHz to 65 kHz Beamwidth from 25° to 16°
High-CHIRPS from 130 kHz to 210 kHz Beamwidth from 10° to 6°
103 kHz total bandwidth from a single transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else within the bandwidth
Fishing Profile: Inshore and Offshore Commercial and Recreational Fishing (tracking deep water canyons and seamounts)
Bronze transducer housing with high performance fairing
Boat size: 8M (25') and above
C typeshell: Fiberglass or wood

CHIRP TECHNOLOGY

5 to 10 times greater detail and resolution
10 to 1,000 times more energy on targets
Accuracy up to 3,000 M (10,000 ft)
Precise separation between baitfish and gamefish
Superior performance in noisy environments
Improved bottom tracking at high boat speeds
/li>

Maximum power: 1000W. Can accommodate Deadrise: 0°20°. The B265LH is a copper through-hole CHIRP sensor that can be used in conjunction with Furuno's CHIRP wideband fish finder. B265LH Complete...

Furuno B265LH Through-Hull CHIRP Transducer Related ProductsAirmar Deadrise Angle Finder - ±1/2° Accuracy
Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Black
Elastomeric Marine SealantSudbury - 10 oz Cartridge - Clear
3 oz (89 ml) Tube of Sudbury Elastomeric Sealant - White
3 oz (89 ml) Tube of Sudbury Elastomeric Sealant - Clear
Tube of 3 oz (89 ml) Sudbury Elastometric Sealant - Black
Tube of BoatLIFE Life-Calk Sealant - Non-Shrink - 2.8 FL. Oz - White
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Black
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Mahogany

Frequently Asked Questions (FAQ) about the Furuno B265LH Through-Through CHIRP Transducer Who is the Furuno?
How to describe the Furuno B265LH Through-Through CHIRP Transducer?
What is the power rating of the product?
How to mount it or what is the mounting style of the CHIRP Furuno B265LH Thru-Hull Transducer?
Can this product read temperature?
What is the length cable?
Who is Furuno? Furuno is a world-renowned manufacturer and leader in themarine electronics field that manufactures an abundance of products. With a wide selection from high-end commercial grade sonar to compact Black Box sonar, Furuno has one to suit almost any vessel. When it comes to communications, optimal performance and complete reliability are essential. This is why Furuno radio equipment is robust and reliable. How to describe the CHIRP Furuno B265LH Thru-Hull transducer? Maximum power: 1000W. Can accommodate Deadrise: 0°20°. The B265LH is a copper through-hole CHIRP sensor that can be used in conjunction with Furuno. The CHIRP wideband fish finder from . Complete B265LH...

Measure water temperature up to a depth of 120 m
Low frequency sensor: 42 kHz to 65 kHz
Sensor high frequency: 130 kHz to 210 kHz
103 kHz total bandwidth from a single

The sensor can quickly detect lhas water temperature and depth
It is perfect for fishing, boating and other water sports
It has a wide frequency range that can be used in high and low frequency environments

For those who need to monitor temperature and depth, this is the best option.
Low frequency sensor for depth and high frequency sensor for water temperature readings.
CHIRPS from 42 kHz to 65 kHz (low frequency) and 130 kHz to 210 kHz (high frequency) .
103 kHz total bandwidth from one sensor.

What is the power rating of the product? 1000 watts

Measure water temperature to a depth of 120 m
Low frequency sensor: 42 kHz to 65 kHz
High frequency sensor : 130 kHz to 210 kHz
103 kHz total bandwidth from a single
The sensor can quickly detectnt water temperature and depth
It is perfect for fishing, boating and other water sports
It has a wide frequency range that can be used in high and low frequency environments
For those who need it to monitor temperature and depth, this is the best option.
Low frequency sensor for depth and high frequency sensor for water temperature readings.
CHIRPS from 42 kHz to 65 kHz (low frequency) and 130 kHz to 210 kHz (high frequency).
103 kHz total bandwidth from one transducer.

How to mount or what is the mounting style of the Furuno B265LH Thru -Hull CHIRP Transducer? Thru-HullCan this product read temperature? YesWhat is the length of the cable? 39.3 feet

Save $150 when you purchase the Furuno B265LH Through-Through CHIRP Transducer for only $1,449 of NVN Marine! Free same day delivery before 3 p.m. Furuno B265LH Thru-Through CHIRP Transducer Technical Specifications

Type:	Marine Navigation & Instruments \| Transducers
Supplier:	Furuno
Weight:	25.0 lbs
Temperature:	Yes
Mounting style:	Thru-Hull
Product manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download PDF

Furuno B265LH Through-Hull CHIRP Transducer User ReviewsFuruno B265LH Through-Hull CHIRP TransducerShipping & Returns

Shipping Weight:	25.0 lbs
Box sizes:	7.00 (h) x 19.00 (w) x 26.00 (l)
Cubic feet:	3458.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our Policy shipping and you can find our return and refund policy here.