FUSION Apollo Marine 4-channel amplifier - 1200 W Entertainment

Apollo Marine 4-Channel Amplifier - 1200W

Amplify the moment with an Apollo marine amplifier designed specifically for use with your compatible marine FUSION DSP stereo and Fusion speakers.

This powerful and efficient 4-channel amplifier makes the difference between hearing music and feeling it. With an impressive 150 watts of RMS power per channel (into 4 ohms), this amplifier can power up to four pairs of speakers or two pairs of speakers and a subwoofer. Easy Tune feature automatically regulates audio settings for optimal sound quality without manual adjustments (requires setup using the Fusion-Link app on a compatible smartphone).

FUSION Apollo MS-AP41200

Features:

Impressive power - 150 watts RMS per channel (at 4 ohms), capable of powering up to four pairs of speakers speakers or two pairs of espeakers and a subwoofer.
Efficient Class D design - uses less power, so you can listen to music for longer at high power. higher volumes, with less power consumption battery.
Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (requires setup using the Fusion-Link app on a compatible smartphone).
LED Indicator - Shows problems related to electrical currents, short circuits as well as temperature.
Less Total Harmonic Distortion - The amplifier is designed with minimum distortion and noise, allowing for better audio quality.
Protected Ignition - Intelligent electronic fuse prevents damage due to over/under current, temperature, output short circuit and other faults.
PCB to conformal coating – The amplifier circuit board has been specially coated to provide enhanced protection against marine elements.
Powder coated aluminum finish - Tested against salt spray, temperature, vibration and UVs with a modern aesthetic design to add style to your boat.
Easy Installation - Exclusive cable connectors and mounting bracket included in the box. Cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allows you to simply clip the amplifier into place for a neat finish.
High Power Mode – High power mode adapters are included in the box, designed to simplify how you connect two channels in high power mode, increasing power output.
Truly Marine Design – Built to withstand the harshest marine environmentsseason after season and comes with a 3 year warranty.

Technical specifications:

Channels - Four ( 4)
- Peak power - 1200 watts
- Power at 4 ohms - 150 watts RMS
- Power at 2 ohms - 290 watts RMS
- Power at 4 ohms bridged - 580 watts RMS
- Operating voltage – 10.8 to 16 VDC
- Class D amplifier
- Resistance rating Water - IPX2
- Dimensions with stand (W x H x D) - 9.25" x 7.06" x 2.13"
- Dimensions without stand (W x H x D) - 9.25" x 7.06" x 1.75"
- Weight - 4.85 pounds

In the box:

One Apollo 4-channel amplifier
One mounting bracket
One power connector
Two speaker connectors with high-power mode adapters
Four 8-gauge flat-head self-tapping screws
Four 8-gauge pan-head self-tapping screws (for extramounting method)
Four screw covers
Mounting template
Installation instructions
Important safety and product information ( ISPI)

*Sold individually

This product can expose you to chemicals known to the State of California as causing cancer, birth defects, or other reproductive harm. For more information,

Fusion Apollo MS-AP41200 4-Channel Marine Amplifier (150 wattsRMS per channel)

Model: 010-02284-40

Keep music going longer without draining your battery as quickly.
No more manual adjustments to your settings audio. Easy Tune does it for you2.
UA glance at the LED indicators allows you to identify if the amplifiers are shorted or overheating.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating thanks to our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery.

These amplifiers use the Easy Tune2 feature, which automatically regulates audio settings. So you can get the best sound quality without making manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high quality.A sH-grade audio, even at high volumes.

Identify electrical problems at a glance. These LEDs will alert you to problems with electrical currents, short circuits as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

Easily install the amplifiers onboard with included mounting brackets.

The amplifier circuit board has been specially coated to provide additional protection against the marine elements.

You can connect up to two speakers per channel, increasing configuration options.

Amplifiers are designed to last season after season. They have been tested for a high level of protection against salt spray, temperature, vibration and UV.

This 4-channel amplifier with 150 watts RMS per channel can power up to four pairs of speakers or two pairs of speakers. high-paspeakers and a subwoofer. It includes high power mode adapters for simple bridging to increase power.

1 Amplifiers are designed exclusively for use with Fusion D. SP compatible stereos (Apollo RA770, Apollo RA670, Apollo WB670 and RA210) and Fusion speakers
2 Requires setup using the Fusion-Link app on a compatible smartphone

Specifications

Physical dimensions without support (LxWxH)	9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
Weight	4 .85 lb (2.2 kg)
Waterproof Class	IPX2
Amplifier class	Class D
Powerednominal power CEA-2006	150 watts RMS x 4 at 14.4 V input - 4 ohms <1% THD
Power total rated output - 2 ohms (watts)	290 watts RMS x 4 at 14.4 V input - 2 ohm <1% THD
Total rated output power - 4 ohm bridged (watts)	580 watts RMS x 2 at 14.4 V input - 4 ohm bridged <1% THD
Peak power (watts)	1200 watts
Input sensitivity	1.3 V RMS
Input impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption (standby)	<5 mA at 14.4 V input
Current consumption (idle)
Current consumption (idle) td>	<1.15 A at 14.4 V input
Current consumption (max)	53 A
Caliber of the fusible	85 Amp electronic fuse (no replacement required)
Protected ignition safety (SAE J1171)	Yes
Circuit protection	Reverse voltage Input under/overvoltage Overheating Output short circuit
Operating temperature range	32° to 122°F (0° to 50° C)

Box contents:

A 4-channel Apollo amplifier
Mounting bracket
One power connector
Two speaker connectors with high power mode adapters
Four 8 gauge flat head self-tapping screws
Four 8 gauge pan head self-tapping screws (for mounting bracket)
Four screw covers
Mounting template
Installation instructions
Important Safety and Product Information (ISPI)

FUSION Apollo Marine 4-Channel Amplifier - 1200 W Product Description

Apollo Marine 4-Channel Amplifier - 1200 W

Amplify the moment with an Apollo marine amplifier designed specifically for use with your FUSION DSP compatible marine stereo and Fusion speakers.

FUSION Apollo MS-AP41200

Features:

Impressive power - 150 watts RMS per channel (at 4 ohms), capable of powering up to four pairs of speakers or two pairs of speakers and a subwoofer.
Efficient Class D Design – Uses less power, allowing you to listen play music for longer at higher volumes, with less battery consumption.
Easy Tune Feature – Automatically adjusts audio settings for the best possible sound quality, without manual adjustment. required (requires setup using the Fusion-Link app on a compatible smartphone).
LED Indicator - Shows problems related to electrical currents, short circuits as well as temperature.
Less Total Harmonic Distortion - The amplifier is designed with minimum distortion and noise, allowing for better audio quality.
Protected Ignition – Intelligent electronic fuse prevents damage from over/under current, temperature, output short circuit andother defects.
Conformal Coated PCB – The amplifier circuit board has been specially coated to provide enhanced protection against marine elements.
Aluminum finish powder coated - Salt spray, temperature, vibration and UV tested with a modern aesthetic design to add style to your boat.
Easy Installation - Exclusive cable connectors and bracket mounting brackets are included in the box. Cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allows you to simply clip the amplifier into place for a neat finish.
High Power Mode – High power mode adapters are included in the box, designed to simplify how you connect two channels in high power mode, increasing power output.
Truly Marine Design - Codesigned to withstand the harshest marine environments season after season and comes with a 3 year warranty.

Technical specifications:

Channels - Four (4)
- Peak power - 1200 watts
- Power at 4 ohms - 150 watts RMS
- Power at 2 ohms - 290 watts RMS
- Power at 4 ohms bridged - 580 watts RMS
- Operating voltage – 10.8 to 16 VDC
- Class D amplifier
- li>
- Water resistance rating - IPX2
- Dimensions with stand (W x H x D) - 9.25" x 7.06" x 2.13"
- Dimensions without stand (W x H x D) - 9.25" x 7.06" x 1.75"
- Weight - 4.85 pounds

In the box:

A 4-channel Apollo amplifier
Mounting bracket
One power connector
Two speaker connectors with high power mode adapters
Four 8 gauge flat head self-tapping screws
Foure 8 gauge pan head self-tapping screws (for mounting bracket)
Four screw covers
Mounting template
Installation instructions
Important Safety and Product Information (ISPI)

*Sold individually

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. . For more information,

Fusion Apollo MS-AP41200 4-Channel Marine Amplifier (150 watts RMS per channel )

Model: 010-02284-40

Keep the music going longer without draining your battery just as quickly.
No more manual adjustments to your audio settings. The Easy Tune feature does it for you2.
A glance at the LED indicators lets you identify if the amplifiers have a short circuit or ifThey overheat.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating thanks to our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery.

These amplifiers use the Easy Tune2 feature, which automatically regulates audio settings. So you can get the best sound quality without making manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high-quality sound, even at higher volumes.

Identify electrical problems at a glance eye. These indiquent LEDs will indicate problems with electrical currents, short circuits as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

The amplifier circuit board has been specially covered to provide additional protection against the marine elements.

You can connect up to two speakers per channel, increasing configuration options. Amplifiers are built to last season after season. They have been tested for a high level of protection against salt spray, temperature, vibration and UV.

This 4-channel amplifier with 150 watts RMS per channel can power up to four pairs of speakers or two pairs of speakers. speakers and a subwoofer. It includes high power mode adapters for bridgingsimple to increase power.

1 Amplifiers are designed exclusively for use with Fusion DSP compatible stereos (Apollo RA770, Apollo RA670, Apollo WB670 and RA210) and Fusion speakers
2 Requires setup using the Fusion-Link app on a compatible smartphone

Specifications

Physical dimensions without support (LxWxH)	9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	9.25" x 7.06" x 2 .13" (235 x 180 x 50 mm)
Weight	4.85 lb (2.2 kg)
Waterproofing	IPX2
Amplifier class	Class D
Nominal power CEA-2006	150 watts RMS x 4 at 14.4 V input - 4 ohms <1% THD
Total rated output power - 2 ohms (watts)	290 watts RMS x 4 at 14.4 V input - 2 ohms <1% THD
Total rated output power - 4 ohms bridged (watts)	580 watts RMS x 2 at 14.4 V input - 4 ohms bridged <1% THD
Peak power (watts)	1,200 watts
Input Sensitivity	1.3V RMS
Input Impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption (standby)	<5 mA at 14.4 V input
Current consumption (idle)	<1.15 A at 14.4 V input
Current consumption (Max)	53 A
Fuse blow	85 One electronic fuse (no replacement required)
Protected ignition safety (SAE J1171)	Yes
Protection circuits	Voltage reverse Input under/over voltage Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C)

What's in the box:

One Apollo 4 ring amplifier
One mounting bracket
One power connector
Two speaker connectors with high mode adapters power
Four 8 gauge flat connectors pan head self-tapping screws
Four 8 gauge pan head self-tapping screws (for mounting bracket)
Four covers -screws
Mounting pattern
Installation instructions
Important Safety and Product Information (ISPI)

FUSION

FUSION Apollo Marine4 channel amplifier - 1200 W

$649

Type:	Entertainment \| Amplifiers
Supplier:	FUSION
Weight:	6.75 lbs
Bridgeable:	Yes
Channels - Available:	4
Waterproof rating:	Splash-proof
Watts:	1200
Categories v2:	Entertainment \| Amplifiers
Category v1:	Marine AUDIO / VIDEO
UPC:	753759232092
Product brochure:	Download PDF
Product installation:	Download PDF

Shipping Weight:	6.75 lbs
Box sizes:	5.00 (h) x 12.00 (l) x 10.00 (l)
Cu feetbes:	600.0
Returnable:	Yes
USPS First Class:	Yes
Oversized item:	Yes