FUSION Apollo Marine 6-channel amplifier - 1800 W Entertainment

Apollo Marine 6-Channel Amplifier - 1800W

Amplify the moment with an Apollo marine amplifier designed specifically for use with your compatible marine Fusion DSP stereo speakers and Fusion.

This powerful and efficient 6-channel amplifier makes the difference between hearing music and feeling it. With an impressive 150 watts of RMS power per channel (into 4 ohms), this amplifier can power up to six pairs of speakers or four pairs of speakers and a subwoofer. Easy Tune feature automatically regulates audio settings for optimal sound quality without manual adjustments (requires setup using the Fusion-Link app on a compatible smartphone).

FUSION Apollo MS-AP61800

Features:

Impressive power - 150 watts RMS per channel (at 4 ohms), capable of powering up to six pairs of speakers speakers or four pairs of encspeakers and a subwoofer.
Efficient Class D design - uses less power, so you can listen to music for longer at high power. higher volumes, with less power consumption battery.
Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (requires setup using the Fusion-Link app on a compatible smartphone).
LED Indicator - Shows problems related to electrical currents, short circuits as well as temperature.
Less Total Harmonic Distortion - The amplifier is designed with minimum distortion and noise, allowing for better audio quality. .
Protected Ignition - Intelligent electronic fuse prevents damage due to over/under current, temperature, output short circuit and other faults.
PCB conformal coated – Lhe amplifier circuit board has been specially coated to provide enhanced protection against marine elements.
Powder Coated Aluminum Finish - Tested against salt spray, temperature, vibration and UVs with a modern aesthetic design to add style to your boat.
Easy Installation: Exclusive cable connectors and mounting bracket are included in the box. Cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allows you to simply clip the amplifier into place for a neat finish.
High Power Mode – High power mode adapters are included in the box, designed to simplify how you connect two channels in high power mode, increasing power output.
Truly Marine Design – Built to withstand the the most difficult marine environmentsficiles season after season and comes with a 3 Year Warranty.

Technical Specifications:

Channels – Six (6)
Peak power - 1800 Watts
Power at 4 ohms - 150 Watt RMS
Power at 2 ohms - 290 Watt RMS
Power at 4 ohms bridged - 580 Watt RMS
Operating voltage - 10.8 to 16 VDC
Class D amplifier
Resistance rating waterproof - IPX2
Dimensions with support (L x H x D) - 11.69" x 7.06" x 2.13"
Dimensions without support (L x H x D) - 11.69" x 7.06" x 1.75"
Weight - 5.95 pounds

In the box:

One Apollo 6-channel amplifier
- One mounting bracket
- One power connector
- Three power connectors speakers with high-power mode adapters
- Four 8-gauge flat-head self-tapping screws
- Four 8-gauge pan-head self-tapping screws (for standmounting)
- Four screw covers
- Mounting pattern
- Installation instructions
- Important safety and product information (ISPI)

*Sold individually

This product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Fusion Apollo MS-AP61800 6-Channel Marine Amplifier (150 Watts RMS per Channel)

Model: 010-02284-60

Keep music playing longer without draining your battery as quickly.
No more manual adjustments to your settings audio. Easy Tune does it for you2.
A glance at the LED indicators allows you to identify if the amplifiers are shorted or overheating.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating thanks to our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery.

These amplifiers use the Easy Tune2 feature, which automatically regulates audio settings. So you can get the best sound quality without making manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high quality.-aquality sound, even at higher volumes.

Identify electrical problems at a glance. These LEDs will alert you to problems with electrical currents, short circuits as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

Easily install the amplifiers onboard with included mounting brackets.

The amplifier circuit board has been specially coated to provide additional protection against the marine elements.

You can connect up to two speakers per channel, increasing configuration options.

Amplifiers are designed to last season after season. They have been tested for a high level of protection against salt spray, temperature, vibration and UV.

This 6-channel amplifier with 150 watts RMS per channel can power up to six pairs of speakers or four pairs of speakers. hauspeakers and a subwoofer. It includes high-power mode adapters for simple bridging to increase power.

1 Amplifiers are designed exclusively for use with Fusion DS. P-compatible stereos (Apollo RA770, Apollo RA670, Apollo WB670 and RA210) and Fusion speakers
2 Requires setup using the Fusion-Link app on a compatible smartphone

Specifications

Physical dimensions without support (LxWxH)	11.69" x 7.06" x 1.75" (297 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	11.69" x 7.06" x 2.13" (297 x 180 x 50 mm)
Weight	5 .95 lb (2.7 kg)
Waterproof Class	IPX2
Amplifier class	Class D
Rated power CEA-2006	150 watts RMS x 6 at 14.4 V input - 4 ohms <1% THD
Power total nominal output - 2 ohms (watts)	290 watts RMS x 6 at 14.4 V input - 2 ohm <1% THD
Total rated output power - 4 ohm bridged (watts)	580 watts RMS x 3 at 14.4 V input - 4 ohm bridged <1% THD
Peak power (watts)	1800 watts
Input sensitivity	1.3 V RMS
Input impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption (standby)	<5 mA at 14.4 V input
Current consumption (idle)	<1.15 A at 14.4 V input
Current consumption (maximum)	78 A
Caliberof fuse	125 A electronic fuse (no replacement required)
Protected ignition safety (SAE J1171)	Yes
Protection circuits	Reverse voltage Input under/over voltage Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C )

Contents of the box:

A 6-channel Apollo amplifier
A mounting bracket
One power connector
Three speaker connectors with high power mode adapters
Four 8-gauge flathead connectors tapping screws
Four 8 gauge pan head self-tapping screws (for mounting bracket)
Four screw covers
Mounting template
Instructions installation
Important Safety and Product Information (ISPI)

FUSION Apollo Marine 6-Channel Amplifier - 1800 W Product Description

Apollo Marine 6-Channel Amplifier - 1800 W

Amplify the moment with an Apollo marine amplifier designed specifically for use with your Fusion DSP compatible marine stereo and Fusion speakers.

FUSION Apollo MS-AP61800

Features:

Impressive power - 150 watts RMS per channel(at 4 ohms), capable of powering up to six pairs of speakers or four pairs of speakers and a subwoofer.
Efficient Class D Design – Uses less power, saving you allows you to listen to music for longer at higher volumes, with less battery consumption.
Easy Tune Function – Automatically adjusts audio settings for the best possible sound quality, without manual adjustment. required (Requires setup using the Fusion-Link app on a compatible smartphone).
LED Indicator - Shows issues related to electrical currents and short circuits as well as temperature .
Less total harmonic distortion - - The amplifier is designed with minimal distortion and noise, allowing for better audio quality.
Protected against ignition - A fuse intelligent electronic prevents damage due to over/under current, temperature, currentt-output circuit and other defects.
Conformal Coated PCB – The amplifier circuit board has been specially coated to provide enhanced protection against marine elements.
Powder coated aluminum finish - Salt spray, temperature, vibration and UV tested with a modern designer aesthetic to add style to your boat.
EasyInstallation - Cable connectors Exclusive hardware and a mounting bracket are included in the box. Cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allows you to simply clip the amplifier into place for a neat finish.
High Power Mode – High power mode adapters are included in the box, designed to simplify how you connect two channels in high power mode, increasing the output power.
Truly designedmarine - Built to withstand the harshest marine environments season after season and comes with a 3 year warranty.

Technical specifications:

Channels - Six (6)
Peak power - 1800 Watts
Power at 4 ohms - 150 Watt RMS
Power at 2 ohms - 290 Watt RMS
Power at 4 ohms bridged - 580 Watt RMS
Operating voltage - 10.8 to 16 VDC
Class D amplifier
Water resistance rating - IPX2
Dimensions with stand (W x H x D) - 11.69" x 7.06" x 2.13"
Dimensions without stand (W x H x D) - 11.69" x 7.06" x 1.75"
Weight - 5.95 pounds

In the box:

An Apollo 6-channel amplifier
- A music stand assembly
- A connector power supply
- Three speaker connectors with high-power mode adapters
- Four 8-gauge flat-head self-tapping screws
- Quatre 8 gauge pan head self-tapping screws (for mounting bracket)
- Four cover screws
- Mounting pattern
- Installation instructions
- Important Safety and Product Information (ISPI)

*Sold individually

WARNING :This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Fusion Apollo MS-AP61800 6-Channel Marine Amplifier (150 watts RMS per channel)

Model: 010-02284-60

Keep music going longer without burning outCharge your battery just as quickly.
No more manual settings for your audio settings. The Easy Tune feature does it for you2.
A glance at the LED indicators lets you identify if the amplifiers have a neckrt-circuit or if they overheat.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating thanks to our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery.

These amplifiers use the Easy Tune2 feature, which automatically regulates audio settings. So you can get the best sound quality without making manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high-quality sound, even at higher volumes.

Identify electrical problems at a glance'eye. These indicator lights will tell you about problems with electrical currents, short circuits as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

Easily install the amplifiers on board with mounting brackets included. mounting brackets.

The amplifier circuit board has been specially coated to provide additional protection against marine elements.

You can connect up to two speakers per channel, increasing configuration options.

Amplifiers are designed to last season after season. They have been tested for a high level of protection against salt spray, temperature, vibration and UV.

This 6-channel amplifier with 150 watts RMS per channel can power up to six pairs of speakers or four pairs of speakers. speakers and a subwoofer. It includes adapterss high power mode for simple bridging to increase power.

1 The amplifiers are designed exclusively for use with Fusion DSP compatible stereos (Apollo RA770, Apollo RA670, Apollo WB670 and RA210 ) and Fusion speakers
2 RequestConfiguration uires using the Fusion-Link app on a compatible smartphone

Specifications

Physical dimensions without support (LxWxH)	11.69" x 7.06" x 1.75" (297 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	11.69" x 7.06" x 2.13" (297 x 180 x 50 mm)
Weight	5.95 lbs ( 2.7 kg)
Waterproof	IPX2
Amplifier class	Class D
Nominal power CEA-2006	150 watts RMS x 6 to entry14.4 V - 4 ohms <1% THD
Total rated output power - 2 ohms (watts)	290 watts RMS x 6 at 14.4 V input - 2 ohms <1% THD
Total rated output power - 4 ohms bridged (watts)	580 watts RMS x 3 at 14.4 V input - 4 ohms bridged <1% THD
Peak power (watts)	1800 watts
Input sensitivity	1.3 V RMS
Input impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption (standby)	<5 mA at 14.4 Input V
Current consumption (idle)	<1.15 A at 14.4 V input
Current consumption (Max)	78 A
Fuse blown	125 An electronic fuse (no replacementrequired)
Protected ignition safety (SAE J1171)	Yes
Protection circuits	Reverse voltage Input under/over voltage Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C)

What's in the box:

One Apollo 6 channel amplifier
One mounting bracket
One connector power supply
Three speaker connectors with high-power mode adapters
Four 8-gauge flat connectors pan-head self-tapping screws
Four pan-head self-tapping screws 8 gauge cylindrical (for mounting bracket)
Four screw covers
Mounting pattern
Installation instructions
Information Safety and Product Information (ISPI)

FUSION

FUSION Apollo Mar6-channel ine amplifier - 1800 W

$799

Type:	Entertainment \| Amplifiers
Supplier:	FUSION
Weight:	8.35 lbs
Bridgeable:	Yes
Channels - Available:	6
Waterproof rating:	Splash-proof
Watts:	1,800
Categories v2:	Entertainment \| Amplifiers
Category v1:	Marine AUDIO / VIDEO
UPC:	753759232108
Product brochure:	Download PDF
Product installation:	Download PDF

Shipping Weight:	8.35 lbs
Box sizes:	5.00 (h) x 15.00 (l)x 10.00 (l)
Cubic feet:	750.0
Returnable:	Yes
USPS First Class:	Yes
Oversized item:	Yes