Icom M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports Communication

M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports

The Icom M510BB is perfect for boats that need the AIS to accommodate functionality without taking up valuable space at the helm. The supplied black CommandMic™ provides all safety and communication functions for commercial and recreational boaters.

Clean installation for limited helm space

The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out of sight, placing it up to 60 feet (18.3 m)* from the CommandMic™.

*Two OPC-1541 cables are required for installation 60 feet away

CommandMic™ Stations

Add up to two additional CommandMic™ microphones for boats requiring two or three communications stations. Extend communication points around the bboat, including the cockpit, flybridge and tower. Access intercom functions for one-to-all or one-to-one communications on the boat.

AIS reception

The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated with the NMEA 2000 bus to display radar and chart plotter information on an MFD (multi-function display).

DSC and remote control functionality

In addition to the DSC button conveniently located on the rear of each CommandMic™, the M510BB introduces a dedicated DSC remote control terminal (EN 300 338 compliant -8), allowing connection to an external device to centralize control of emergency communications.

NMEA200 and NMEA 0183-HS

The NMEA 2000 network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (multifunction display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.

Class D DSC functionality

On the back of each CommandMic™ is a convenient DSC button conveniently located. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

Powerful one-way Hailer RX

Built-in 15W amplifier boosts sound output from an external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You may also hear foghorn patterns coming from the bullhorn speaker.

Active noise cancellation

The active noise cancellation feature noise digitally removes noise fromhe background of audio transmission and reception to provide clear communications in noisy maritime environments.

Features:

AquaQuake™ function
Anchor watch function

Specifications:

Control microphone color: black
Remote stations: up to 3
GPS: Internal GPS GNSS receiver, with external GPS antenna connection
NMEA: NMEA 2000/ NMEA 0183 -HS
Waterproof rating: IPX7
Frequency range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz
Usable channels: USA, INT, CAN, WX channels
li>
Broadcast type: 16K0G3E (FM), 16K0G2B (DSC) , 16K0GXW (AIS)*
Required power supply: 13.8 V DC nominal (11.7 15.9 V DC) (negative ground)
Current drain (at 13, 8V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5A (one CommandMic™)4.0 A (two CommandMic™ and one RX Megaphone)
Operating temperature range: –20°C to 60°C / –4°F to 140°F
Antenna impedance: 50 Ω nominal
Dimensions (W x H x D) (projections not included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 inches / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 inches
Approximate weight: RF unit - 890 g; 2 lb / CommandMic™ - 400 g; 14.1 oz

Transmissionter Specifications:

Output Power (at 13.8V DC): 25W, 1W (high, low)
Max. Frequency deviation: +/- 5 kHz
Frequency tolerance: +/- 0.5 kHz
Spurious emissions: less than –70 dBc (high power), less than – 56 dBc (low power)
Residual modulation: more than 40 dB
Adjacent channel power: more than 70 dB

Receiver Specifications:

Sensitivity: FM (at 12 dB SINAD): 0.22 μV typical / DSC (at1% BER): –7 dBµ emf typical
Adjacent channel selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
Spurious response : FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf
Mood and Noise: Over 40 dB
Audio Output Power: CommandMic™ - Over 2 W (4 Ω, 10% distortion) / Megaphone Rx - Over 15 W (4 Ω)

PRODUCT ID: 100071
SKU: NVN-100071
CSKU: CWR-100071
REWRITE: 111182-icom -m510bb-21-black-box-vhf-w-black
MPN: M510BB 21
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: ICOM M510BB 21 BLACK BOX VHF WITH BLACK MICRO CONTROL AND 3
NAME_EX:
PTITLE: Icom M510BB 21 Black Box VHF with black control MIC and 3 control mic ports
TYPE: Communication | VHF - Fixed support
SELLER: Icom
ELECTRONICS> ELECTRONIQEU MARINE> MARINE RADIOS

Gtags:

GSpecs:

Icom M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports Product description

M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports

Icom The M510BB is perfect for boats that need AIS to benefit from functionality without taking up valuable space at the helm. The supplied black CommandMic™ provides all safety and communication functions for commercial and recreational boaters.

Clean installation for limited helm space

*Two OPC-1541 cables are required for installation 60 feet away

CommandMic™ Stations

Add up to two additional CommandMic™ microphones toboats requiring two or three communication stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access intercom functions for one-on-one or one-on-one communications on the boat.

AIS Reception

The M510BB includes a built-in AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000 bus to display radar and chart plotter information on an MFD (multi-function display).

DSC and Remote Control functionality

In addition to the DSC button conveniently located on the rear of each CommandMic™, the M510BB introduces a dedicated DSC remote control terminal (EN 300 338-8 compatible), allowing connection to a external device to centralize control of emergency communications.

NMEA200 and NMEA 0183-HS

The NMEA 2000 network provides a plug connection -and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.

Class D DSC functionality

On the back of each CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

Powerful one-way Hailer RX

Active Noise Cancellation

The Active Noise Cancellation feature digitally removes background noise from audio transmission and reception to provide clear communications in noisy maritime environments.

Features:

AquaQuake™ function
Anchor watch function

SSpecifications:

Control mic color: black
Remote stations: up to 3
Power of output: 25 W
GPS: Internal GPS GNSS receiver, with external GPS antenna connection
NMEA: NMEA 2000/ NMEA 0183 -HS
Waterproof rating: IPX7
Frequency range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz
Usable channels: USA, INT, CAN channels, WX
Transmission type: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*
Power requirements: 13.8 V DC nominal (11.7 15, 9V DC) (negative ground)
Current consumption (at 13.8 V DC): TX max. power - 5.5 A Max. / RX Max. audio - 1.5 A (one CommandMic™) 4.0 A (two CommandMic™ and one RX loudspeaker)
Operating temperature range: –20°C to 60°C / –4 °F to 140°F
Antenna impedance: 50 Ω nominal
Dimensions (W x H x D) (projections not included): RF unit - 216 × 79 × 113mm; 8.5 × 3.1 × 4.4 inches / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in.
Applicationroximate Weight: RF unit - 890 g; 2 lb / CommandMic™ - 400 g; 14.1 oz

Transmitter Specifications:

Output Power (at 13.8V DC): 25W, 1W (high, low)
Max. Frequency deviation: +/- 5 kHz
Frequency tolerance: +/- 0.5 kHz
Spurious emissions: less than –70 dBc (high power), less than – 56 dBc (low power)
Residual modulation: more than 40 dB
Adjacent channel power: more than 70 dB

Receiver specifications:

Sensitivity: FM (at 12 dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical
Adjacent channel selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
Spurious response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf
Mood and Noise: Over 40 dB
Audio Output Power: CommandMic™ - Over 2 W (4 Ω, 10% distortion) / Rx Megaphone - Over 15 W (4 Ω)

Save $449 when you purchase the Icom M510BB 21 Black Box VHF with Black Control Mic and 3 Control Mic Portsfor only $799 from NVN Marine! Free same day delivery before 3 p.m. Icom M510BB 21 Black Box VHF with black control mic and 3 control mic ports Technical specifications

Type:	Cocommunication \| VHF - Fixed mounting
Supplier:	Icom
AIS:	Yes
Integrated GPS:	Yes
Color:	Black
Phone:	Yes
Intercom capability:	Yes
NMEA 2000:	Yes
Remote mic capable:	Yes
Product Brochure:	Download PDF

Icom M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports User reviewsIcom M510BB 21 Black Box VHF with black control microphone and 3 microphone ports Order Shipping & Returns

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.