Insta-Trim Boat Leveler 10" x 10" Trim Tab Set Boat Outfitting
Insta-Trim Trim Tab Kit 10" x 10"Insta-Trim, the original hydraulic boat leveler, delivers a better ride every time you leave the dock. Each Insta-Trim system includes:
Wiring: Color-coded wiring in 25' and 40' lengths with quick-connect fittings, meets federal standards for heat, traction and insulation.
Solenoid: Our solenoids are custom designed for the Insta-Trim Boat Leveler Company, epoxy sealed and moisture resistant, preventing short circuits. The solenoids lock the tabs in any position, eliminating kickback. Barbed-style hose fittings provide tight, secure connections.
Motor: A powerhouse with coated wiring that resists temperature and amperage buildup. 1 3/4" battery windings and top mounteliminate oil leaks. The motor is mounted with stainless steel nuts and bolts and is easily disassembled. One quart of Insta-Trim biodegradable transmission oil, funnel and mounting hardware are provided.
Pump: Designed and engineered exclusively by Insta-Trim. The built-in bypass is factory set at 400 P.S.I. Tolerance maintained at +/-.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump extra pressure.
Mounts: Type mounts Swivel allow cylinders to be mounted and adjusted to any angle. Knockout pins act as shear pins if the tab strikes an object.
Cylinders: Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist damage ultraviolet rays. Two expanding type seals and O-rings eliminate leaks at highe and low pressure. Barbed barrel fitting and inserted tubular steel rod prevent the hose from flying away and breaking. A stainless steel spring retracts the cylinder when the boat is not in motion.
Stainless Steel Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-trim systems use hinges that prevent most splashing and can be used for transom or bottom mounting.
Engine cover: The impact-resistant ABS plastic cover with an integrated oil tank mounts easily with two screws. Our cover protects the engine from occasional washes.
Hose: Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and durable coatingto UV. Rated at 2000 pounds. Burst pressure, 15; Hose is provided for your system. Stainless steel clamps hold the hose to the barb fittings at the solenoids and at the cylinder connection.
Rocker controls: Dash-mounted, they are easy to use.
Optional waterproof touch button switches: Adjust the tabs for maximum control and performance. 3" diameter.
Insta-Trim Trim Option Card Kit 10" x 10" Insta-Trim, the original hydraulic marine leveler, delivers a better driving experience every time you leave the dock The features of each Insta- Trim system are: Wiring: 25'...
PRODUCT ID: 52484
SKU: NVN-52484
CSKU: CWR-52484
REWRITE: 63595 -boat-leveler-insta-trim-10-x- 10 trim
MPN: N101200
UPC:
ASIN: B00V3VVH1Q
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Insta-Trim 10" x 10" Boat Leveler Trim Tab Set
EX_NAME: INSTA TRIM PM 10X12 Boat Leveler Trim Tab Set #N101200
br> PTITLE: Insta-Trim Boat Leveler Trim 10" x 10" Tab Set
TYPE: Boat Upfitting | Trim Tabs
SELLER: Boat Leveler Co.
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Insta-Trim 10" x 10" Trim Tab Set Boat Leveler Product Description Insta-Trim 10" x 10" Trim Tab Set
Insta-Trim, the hydraulic boat leveler original, provides a better ride every time you leave the dock. Each Insta-Trim system includes:
Wiring: Color-coded wiring in 25' and 40' lengths with quick-connect fittings, meets federal standards for heat, traction and insulation.
Solenoid: Our solenoids are custom designed for the Insta-Trim Boat Leveler Company, epoxy sealed and moisture resistant, preventing short circuits. The solenoids lock the tabs in any position, eliminating kickback. Barbed type hose fittings provide tight, secure connections.
Motor: A powerhouse with coated wiring that resists temperature and amperage buildup. L1 3/4" stack windings and top mount eliminate oil leaks. Engine is mounted with stainless steel nuts and bolts and disassembles easily. One quart biodegradable Insta-Trim transmission oil , funnel and mounting hardware are provided.
Pump: Designed and manufactured exclusively by Insta-Trim Built-in bypass is factory set to 400 P.S.I. Tolerance maintained at +. /-.00025 Amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.
Supports: Swivel type brackets allow cylinders to be mounted and adjusted to any angle Knockout pins act as shear pins if the tab hits an object.
Cylinders: Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist ultraviolet rays Two ex-type seals.pans and O-rings eliminate high and low pressure leaks. Barbed barrel fitting and inserted tubular steel rod prevent the hose from flying away and breaking. A stainless steel spring retracts the cylinder when the boat is not in motion.
Stainless Steel Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim systems use hinges that prevent most spillage and can be used for cross-member or bottom mounting.
Engine cover: The impact-resistant ABS plastic cover with an integrated oil tank mounts easily with two screws. Our cover protects the engine from occasional washes.
Hose: Designed and manufactured exclusively for Insta-Trim with a re-strapReinforced nylon and a UV resistant coating. Rated at 2000 pounds. Burst pressure, 15; Hose is provided for your system. Stainless steel clamps hold the hose to the barb fittings at the solenoids and at the cylinder connection.
Rocker controls: Dash-mounted, they are easy to use.
Optional waterproof touch button switches: Adjust the tabs for maximum control and performance. 3" diameter.
Insta-Trim Trim Option Card Kit 10" x 10" Insta-Trim, the original marine hydraulic leveler, delivers a better driving experience every time you leave the dock The feature of each Insta-Trim system is: Wiring: 25'...
Insta-Trim Boat Leveler 10" x 10" Trim Tab Set Related Products12vdc Boat Leveler Pump. Universal Tabbed Trim with Oil and Hose Fittings
ElectBoat Leveler Solenoid Valve - White Wires
Boat Leveler Solenoid Valve - Green Wires
Boat Leveler Hydraulic Hose - Sold by the Foot
Boat Leveler Hydraulic Cylinder
Boat Leveler Boat Leveling Tab Locator - Black
Boat Leveling Tab Locator - White
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" diameter
Frequently Asked Questions (FAQ) about the clearance Who is Boat Leveler Co.?
How to describe the Boat Leveler Insta-Trim 10" x 10" Trim Tab Set?
What is the construction of the product?
What is the actuator type?
Who is Boat Leveler Co. is the original hydraulic leveler that delivers a better ride every time?leave the platform. Easy to install, Insta-Trim boat levelers are strong, durable and available in lengths to fit most boats. Custom sizes are also available, so any boating enthusiast can enjoy premium boating. Insta-Trim has been involved in the marine industry for over 40 years, always assuring you of a quality duct with excellent performance. How do I describe the Insta-Trim 10" x 10" Trim Tab Set Boat Leveler? Insta-Trim Trim Option Card Kit 10" x 10" Insta-Trim, the original hydraulic marine leveler, delivers a better driving experience every time you leave the dock. The feature of each Insta-Trim system is: Wiring: 25'...What is the construction of the product? Stainless Steel
- What is the type of actuator? Hydraulic
Save $331on the purchase of the Tab SetInsta-Trim 10" x 10" Boat Leveler Trimfor only $513from NVN Marine! Same day dispatch before 3 p.m. Insta-Trim 10" x 10" Boat Leveler Trim Tab Set Technical Specifications
| Type: | Boat Equipment | Trim Tabs |
|---|---|
| Seller: | Boat Leveler Co. |
| Weight: | 23.3 lbs |
| Actuator type: | Hydraulic |
| Construction: | Stainless steel |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product installation: | Download PDF |
| Shipping Weight: | 23.3 lbs |
|---|---|
| Box Sizes: | 9.00 (h) x 13.00 (w) x 19.00 (w) |
| Cubic Feet: | 2223.0 |
| Returnable: | Yes |
