Boat Leveler 14" x 11" Decorative Tab Set Boat Outfitting
Features:Wiring
- Color-coded wiring in lengths from 25' to 40' with quick-connect fittings, meets federal standards for heat, traction and insulation, making installation easy.
Solenoids
- They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits. Solenoids lock tabs in any position, eliminating drift Barbed-style hose fittings provide tight, secure connections.
Motor
- A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup. 1 3/4" battery windings and top mounting eliminate leakage. 'oil. The motor is mounted with stainless steel nuts and bolts anddisassembles easily.
Brackets
- The swivel type brackets allow the cylinders to be mounted and adjusted to any what angle. Knockout pins act as shear pins when the tab hits an object.
Pump
- Designed and manufactured exclusively by Instatrim . The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.
Motor Cover
- 4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional washes down
Cylinders
- The cylinders are made of reinforced nylon. impact-resistant fiberglass eliminatest expansion and resist ultraviolet rays. , along with an O-ring, eliminate high and low pressure leaks. The barbed cylinder connection and an inserted tubular rod prevent explosion and breakage of the pipe.
A stainless steel spring retracts the cylinder when the boat is not moving.
Compensating tabs
- 12 gauge 304 stainless steel trim mats are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.
Hose
- Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lbs burst pressure, 15' of hose is provided for your system. When entering the transom 6" beyondAbove the waterline, the hoses are held securely with a hose packing.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.
Toggle Type Controls
- Mounted on the dashboard, they are easy to use. The 2TP microswitch with silver contact points adjusts the tabs for maximum control and performance.
A quart of Insta-Trim biodegradable transmission oil, a funnel and mounting hardware is provided.
Persol is designed and manufactured in Italy, derived from the Italian "parilsemelle" meaning "representing the sun", and is popular with fashion designers and celebrities for its impeccable fit and comfort. : 27327-boat-leveler-14-x-11-trim-tab
MPN: N141100
UPC:
ASIN: B004GAFMBW
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Base Leveler14" x 11" Trim Tab Set
EX_NAME: BOAT LEVEL 14X11 TRIM TAB SE INSTA TRIM PN # N141100
PTITLE: Boat 14" x 11" Level Trim Tab Set
TYPE : Boat equipment | Trim Tabs
SELLER: Boat Leveler Co.
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIESGoogle Title : Persol PO0649 1062/O4 Spotted Blue/Grey-Blue Mirror **
Gtags:
Specifications G:
14" x 11" Boat Leveler Decorative Tab Set Product Description Features:
Wiring b>
- Color-coded wiring in 25' to 40' lengths with quick-connect fittings, meets federal standards for heat, tensile and insulation, making installation easy.
Solenoid
- They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits Solenoids lock tabs in any position, eliminating drift Barbed type hose fittings provide tight, secure connections.
Motor
- A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup in the battery windings. 1 3/4" and top mounting eliminate foil leaks. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.
Mounts
- Type brackets Swivel allow the cylinders to be mounted and adjusted to any angle K. The notch pins act as shear pins if the tab hits an object.
Pump
- Designed and manufactured exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.
Motor Cover
- 4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional down washes
Cylinders
A stainless steel spring retracts the cylinder when the boat is not moving.
Compensating tabs
- 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.
Hose
- Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lb burst pressure, 15' de hose are provided for your system. Entering the transom 6" above the waterline, the hoses are held securely with a hose trim.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.
Toggle Type Controls
- Mounted on the dashboard, they are easy to use The 2TP micro switch with contact points. Silver adjust tabs for maximum control and performance.
One quart of Insta-Trim biodegradable transmission oil, funnel and mounting hardware are provided.
Persol is designed and manufactured in Italy, derived from the Italian "per il sole" meaning "representing the sun", and is loved by fashion designers and celebrities for its impeccable fit and comfort
Boat leveler set 14" x 11" Related productsBoat leveler.Universal 12vdc Compensating Tab Pump with Oil and Hose Fittings
Boat Leveler Solenoid Valve - White Wires
Boat Leveler Solenoid Valve - Green Wires
Boat Leveler Hydraulic Hose - Sold to foot
Hydraulic Boat Leveler Cylinder
Boat Leveler Tab Locator - Black
Boat Leveler Tab Locator - White
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
/>
Frequently Asked Questions (FAQ) About 14" x 11" Boat Leveler Trim Tab Set Who is Boat Leveler Co.?
How to Describe Boat Leveler Trim Boat 14" x 11" Tab Set?
What is the construction of the product?
What is the actuator type?
Who is Boat Leveler Co.'s leveler? hydraulic original that delivers a better ride every time you leave the dock. Easy to install, Insta-Trim boat levelers are strong, durable and available in lengths to fit most boats. Custom sizes are also available, so any boating enthusiast can enjoy premium boating. Insta-Trim has been involved in the marine industry for over 40 years, always assuring you of a quality duct with excellent performance. How to describe the 14" x 11" Boat Leveler Trim Tab Set? Persol is designed and manufactured in Italy, derived from the Italian "per il sole" meaning "representing the sun", and is loved by fashion designers and celebrities for its impeccable fit and comfort. What is the construction of the product? Stainless Steel
- What is the type of actuator? Hydraulics
Save $349with the purchase of the 14" x 11" Boat Leveler Compensation Tab Setfor only $535from NVN Marine! Same day dispatch before 3 p.m. 14" x 11" Boat Leveler Compensating Tab Set Technical Specifications
| Type: | Boat Equipment | Trim Tabs |
|---|---|
| Seller: | Boat Leveler Co. |
| Weight: | 26.6 lbs |
| Construction: | Stainless steel |
| Actuator type: | Hydraulic |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product installation: | Download PDF |
| Shipping Weight: | 26.6 lbs |
|---|---|
| Box sizes: | 9.00 (h) x 13.00 (w) x 19.00 (w) |
| Cubic feet: | 2223.0 |
| Returnable: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here .
- Boat Leveler Universal Trim Tab Pump 12VDC with Oil and Hose Fittings
- 12732-A Boat Leveler Nylon Cylinder Bracket * 1pc
- Boat Leveler 12" x 9" Decorative Tab Set
- Boat Leveler 12" x 8" Decorative Tab Set
- Boat Leveler 12" x 11" Decorative Tab Set
- 10" x 8" Boat Leveler Trim Tab Set
- Bluewater 22mm Push Button Switch On/Off/On Contact Blue/Green/Red LED 4' Cable
