Boat Leveler 12" x 9" Decorative Tab Set Boat Outfitting

Features:

Wiring

Color-coded wiring in lengths from 25' to 40' with quick-connect fittings, meets federal standards for heat, traction and insulation, making installation easy.

Solenoids

They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits. Solenoids lock tabs in any position, eliminating drift Barbed-style hose fittings provide tight, secure connections.

Motor

A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup. 1 3/4" battery windings and top mounting eliminate leakage. 'oil. The motor is mounted with stainless steel nuts and bolts anddisassembles easily.

Brackets

The swivel type brackets allow the cylinders to be mounted and adjusted to any what angle. Knockout pins act as shear pins when the tab hits an object.

Pump

Designed and manufactured exclusively by Instatrim . The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.

Motor Cover

4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional washes down

Cylinders

The cylinders are made of reinforced nylon. impact-resistant fiberglass eliminatest expansion and resist ultraviolet rays. , along with an O-ring, eliminate high and low pressure leaks. The barbed cylinder connection and an inserted tubular rod prevent explosion and breakage of the pipe.
A stainless steel spring retracts the cylinder when the boat is not moving.

Compensating tabs

12 gauge 304 stainless steel trim mats are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.

Hose

Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lbs burst pressure, 15' of hose is provided for your system. When entering the transom 6" beyondAbove the waterline, the hoses are held securely with a hose packing.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.

Toggle Type Controls

Mounted on the dashboard, they are easy to use. The 2TP microswitch with silver contact points adjusts the tabs for maximum control and performance.

A quart of Insta-Trim biodegradable transmission oil, a funnel and mounting hardware are provided.

General Electric Pump - The pump diverter valve is equipped with an adjustable flexible pressure relief valve, so that the fluid can circulate, from so that the pump is not affected by 12...: 27324-boat-leveler-12-x-9-trim-tab
MPN: N129000
UPC:
ASIN: B001KWAF4I
WSKU :
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Boat Leveler 12" x 9" Trim Tab Set
NAME_EX: BOAT LEVEL TRIM SET 12X9 INSTA TRIM PN# N129000
PTITLE: Boat Leveler Trim Tab Set 12" x 9"
TYPE: Equipment of boat | Trim Tabs
SELLER: Boat Leveler Co.
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Watch

Google Title : Boat Universal Leveling Engine
Watch
Gtags:

GSpecs:

12" x 9" Boat Leveler Decorative Tab Set Product Description Features:

Wiring b>

Color-coded wiring in 25' to 40' lengths with quick-connect fittings, meets federal standards for heat, tensile and insulation, making installation easy.

Solenoid

They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits Solenoids lock tabs in any position, eliminating drift Barbed type hose fittings provide tight, secure connections.

Motor

A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup in the battery windings. 1 3/4" and top mount eliminate leaksites of oil. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.

Mounts

Type brackets Swivel allow cylinders to be mounted and adjusted to any angle Kn. Locking pins act as shear pins if the tab hits an object.

Pump

Designed and manufactured exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.

Motor Cover

4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional down washes

Cylinders<.br>

Impact-resistant fiberglass-reinforced nylon cylinders eliminate expansion and resist ultraviolet rays. , along with an O-ring, eliminate high and low pressure leaks. The barbed cylinder connection and an inserted tubular rod prevent explosion and breakage of the pipe.
A stainless steel spring retracts the cylinder when the boat is not moving.

Compensating tabs

12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.

Hose

Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lb burst pressure,15' of pipe is provided for your system. Entering the transom 6" above the waterline, the hoses are held securely with a hose trim.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.

Toggle Type Controls

Mounted on the dashboard, they are easy to use The 2TP micro switch with contact points. Silver adjust tabs for maximum control and performance.

One quart of Insta-Trim biodegradable transmission oil, funnel and mounting hardware are provided.

General Electionsric pump-The bypass valve of the pump is equipped with an adjustable pressure relief valve, so that the fluid can circulate, so the pump will not affected by 12...

Boat Leveler 12" x 9" Trim Tab Set Related Products Boat Leveler12V DC Universal Trim Valve Pump with Oil and Hose Connections
Boat Leveler Solenoid Valve - White Wires
Boat Leveler Solenoid Valve - Green Wires
Water Leveler Hydraulic Hose Boat - Sold by The Foot
Boat Leveler Hydraulic Cylinder
Boat Leveler Tab Locator - Black
Boat Leveler Tab Locator - White
Tecnoseal Rudder Anode R1 - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter

Frequently Asked Questions (FAQ) About the 12" x 9" Boat Leveler Compensation Tab Set Who is the Boat Leveler Co.?
How Describe the 12" x 9" Boat Leveler Trim Tab Set?
What is the construction of the product
What is the actuator type?
Who is Boat Leveler Co. ?Insta-Trim est the original hydraulic leveler that delivers a better ride every time you leave the dock. Easy to install, Insta-Trim boat levelers are strong, durable and available in lengths to fit most boats. Custom sizes are also available, so any boating enthusiast can enjoy premium boating. Insta-Trim has been involved in the marine industry for over 40 years, always assuring you of a quality duct with excellent performance. How to describe the 12" x 9" Boat Leveler Trim Tab Set? General Electric Pump - The pump diverter valve is equipped with an adjustable pressure relief valve, so that the fluid can circulate, so the pump will not be affected by 12... What is the construction of the product? Stainless Steel

$311

12" x 9" Boat Leveling Leg Set

$483

Type:	Boat Equipment \| Trim Tabs
Seller:	Boat Leveler Co.
Weight:	23.9 lbs
Construction:	Stainless steel
Actuator type:	Hydraulic
User Guide:	Download PDF
Product Manual:	Download PDF
Product installation:	Download PDF

Shipping Weight:	23.9 lbs
Box Sizes :	9.00 (h) x 13.00 (w) x 19.00 (w)
Feet cubes:	2223.0
Recordable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.