Insta-Trim Boat Leveler 12" x 12" Decorative Tab Set Boat Outfitting
Insta-Trim Trim Tab Kit 12" x 12"Insta-Trim, the original hydraulic boat leveler, delivers a better ride every time you leave the dock. Each Insta-Trim system includes:
Wiring: Color-coded wiring in 25' and 40' lengths with quick-connect fittings, meets federal standards for heat, traction and insulation.
Solenoid: Our solenoids are custom designed for the Insta-Trim Boat Leveler Company, epoxy sealed and moisture resistant, preventing short circuits. The solenoids lock the tabs in any position, eliminating kickback. Barbed-style hose fittings provide tight, secure connections.
Motor: A powerhouse with coated wiring that resists temperature and amperage buildup. 1 3/4" battery windings and top mounteliminate oil leaks. The motor is mounted with stainless steel nuts and bolts and is easily disassembled. One quart of Insta-Trim biodegradable transmission oil, funnel and mounting hardware are provided.
Pump: Designed and engineered exclusively by Insta-Trim. The built-in bypass is factory set at 400 P.S.I. Tolerance maintained at +/-.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump extra pressure.
Mounts: Type mounts Swivel allow cylinders to be mounted and adjusted to any angle. Knockout pins act as shear pins if the tab strikes an object.
Cylinders: Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist damage ultraviolet rays. Two expanding type seals and O-rings eliminate leaks at highe and low pressure. Barbed barrel fitting and inserted tubular steel rod prevent the hose from flying away and breaking. A stainless steel spring retracts the cylinder when the boat is not in motion.
Stainless Steel Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-trim systems use hinges that prevent most splashing and can be used for transom or bottom mounting.
Engine cover: The impact-resistant ABS plastic cover with an integrated oil tank mounts easily with two screws. Our cover protects the engine from occasional washes.
Hose: Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and durable coatingto UV. Rated at 2000 pounds. Burst pressure, 15; Hose is provided for your system. Stainless steel clamps hold the hose to the barb fittings at the solenoids and at the cylinder connection.
Rocker controls: Dash-mounted, they are easy to use.
Optional waterproof touch button switches: Adjust the tabs for maximum control and performance. 3" diameter.
Insta-Trim 12" x 12" Fin Kit Insta-Trim, the original hydraulic marine leveler, provides a better driving experience every time you leave the dock. Features of each Insta-Trim System is: Wiring: 25'...
PRODUCT ID: 52485
SKU: NVN-52485
CSKU: CWR-52485
REWRITE: 63596-boat-leveler-insta -trim-12-x-12- trim
MPN: N121200
UPC:
ASIN: B00MCOHV3Q
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Insta-Trim 12" x 12" Boat Leveler Trim Tab Set
EX_NAME: 12X12 INSTA TRIM Boat Leveler Trim Tab SET PN# N121200
PTITLE: Trim Tab Set for Insta-Trim boat leveler 12" x 12"
TYPE: Boat fittings | Trim Tabs
SELLER: Boat Leveler Co.
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Boat Leveler Co. N121200 Boat Leveler 12x12 Trim Tab Set Insta Trim PN#
Gtags:
GSpecs:
Insta-Trim Boat Leveler 12" x 12" Trim Tab Set Product Description Insta-Trim 12" x 12" Trim Tab Set
Insta-Trim, the hydraulic boat leveler original, provides a better ride every time you leave the dock. Each Insta-Trim system includes:
Wiring: Color-coded wiring in 25' and 40' lengths with quick-connect fittings, meets federal standards for heat, traction and insulation.
Solenoid: Our solenoids are custom designed for the Insta-Trim Boat Leveler Company, epoxy sealed and moisture resistant, preventing short circuits. The solenoids lock the tabs in any position, eliminating kickback. Barbed-style hose fittings provide tight, secure connections.
Motor: A powerhouse with coated wiring that resists temperature and amperage buildup. L1 3/4" stack windings and top mount eliminate oil leaks. Engine is mounted with stainless steel nuts and bolts and disassembles easily. One quart biodegradable Insta-Trim transmission oil , funnel and mounting hardware are provided.
Pump: Designed and manufactured exclusively by Insta-Trim Built-in bypass is factory set to 400 P.S.I. Tolerance maintained at +. /-.00025 Amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.
Supports: Swivel type brackets allow cylinders to be mounted and adjusted to any angle Knockout pins act as shear pins if the tab hits an object.
Cylinders: Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist ultraviolet rays Two ex-type seals.pans and O-rings eliminate high and low pressure leaks. Barbed barrel fitting and inserted tubular steel rod prevent the hose from flying away and breaking. A stainless steel spring retracts the cylinder when the boat is not in motion.
Stainless Steel Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim systems use hinges that prevent most spattering and can be used for crossbar or bottom mounting.
Engine cover: The impact-resistant ABS plastic cover with an integrated oil tank mounts easily with two screws. Our cover protects the engine from occasional washes.
Hose: Designed and manufactured exclusively for Insta-Trim with a re-strapReinforced nylon and a UV resistant coating. Valued at 2000 pounds. Burst pressure, 15; Hose is provided for your system. Stainless steel clamps hold the hose to the barb fittings at the solenoids and at the cylinder connection.
Rocker controls: Dash-mounted, they are easy to use.
Optional waterproof touch button switches: Adjust the tabs for maximum control and performance. 3" diameter.
Insta-Trim Trim Tab Kit 12" x 12" Insta-Trim, the original hydraulic marine leveler, provides a better driving experience every time you leave the dock. The feature of each Insta-Trim system is: Wiring: 25'...
Insta-Trim Boat Leveler 12" x 12" Trim Tab Set Related Products12vdc Boat Leveler Universal Trim Tab Pump with Oil and Pipe Fittings
Solenoid valveBoat Leveler - White Wires
Boat Leveler Solenoid Valve - Green Wires
Boat Leveler Hydraulic Hose - Sold by the Foot
Boat Leveler Hydraulic Cylinder
Boat Leveler Locator of Tabs - Black
Boat Leveling Tab Locator - White
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2 -13/16" diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" diameter
Frequently Asked Questions (FAQ) about Tab Set Boat Leveler Insta-Trim 12" x 12" Trim Tab Set Who is Boat Leveler Co.? How to Describe the Boat Leveler Insta-Trim 12" is the construction of the product?
What is the actuator type?
What is Boat Leveler Co. the original hydraulic leveler that delivers a better ride every time? leaves youenter the dock. Easy to install, Insta-Trim boat levelers are strong, durable and available in lengths to fit most boats. Custom sizes are also available, so any boating enthusiast can enjoy premium boating. Insta-Trim has been involved in the marine industry for over 40 years, always assuring you of a quality duct with excellent performance. How to describe the Insta-Trim 12" x 12" Trim Tab Set Boat Leveler? Insta-Trim Drift Kit 12" x 12" Insta-Trim, the original hydraulic marine leveler, delivers a better driving experience every time you leave the dock. The feature of each Insta-Trim system is: Wiring: 25'...What is the construction of the product? Stainless Steel
- What is the type of actuator? Hydraulics
Save $333on the purchase of the leveler compensation tab set12" x 12" Insta-Trim Boat Trim for only $516 from NVN Marine! Same day dispatch before 3 p.m. Insta-Trim 12" x 12" Boat Leveler Trim Tab Set Technical Specifications
| Type: | Boat Equipment | Trim Tabs |
|---|---|
| Seller: | Boat Leveler Co. |
| Weight: | 25.1 lbs |
| Actuator type: | Hydraulic |
| Construction: | Stainless steel |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product installation: | Download PDF |
| PShipping Weight: | 25.1 lbs |
|---|---|
| Box Sizes: | 9.00 (h) x 13.00 (w) x 19.00 (w) |
| Cubic feet: | 2223.0 |
| Returnable: | Yes |
