Jabsco Impeller Kit 10 Blades Nitrile 1-19/32" Diameter Marine Plumbing & Ventilation

Turbine kit

Material:Nitrile
Drive type:Single flat drive
Number of blades:10
Dimensions:

Diameter:

Shaft Width:^5/16"
^{Shaft Diameter:3/4"}

Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps
Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine service. When installed correctly, a wheel can last several years, but it is always. recommended to follow a preventive rather than corrective maintenance program.

Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco impeller removal tool or pliers. channel lock, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

WARNING: This product can expose you to chemicals, including LEAD, which are known to the State of California may cause cancer, birth defects, or other reproductive harm. For more information,

PRODUCT ID: 50254
SKU: NVN-50254
CSKU: CWR-50254
REWRITE: 61365-jabsco-impeller-kit-10-blade
MPN: 9200-0023-P
br> br> UPC: 671880591867
ASIN: B000O8B5XY
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-92000023P
NAME : Jabsco Impeller Kit - 10 blades - Nitrile - 1-19/32" diameter
EX_NAME: JABSCO NITRILE IMPELLER KIT 10 blades 1 19/32 DIA X 3/4 W
PTITLE: Jabsco Impeller Kit - 10 palese - Nitrile - 1-19/32" diameter
TYPE: Marine Plumbing and Ventilation | Turbines
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Jabsco 9200-0023-P, Nitrile, drive type 4, 10 blades, 1-19/32 diameter, 3/4 width, 5/16 shaft, brass insert
Jabs Kitco 10-blade Impeller, Nitrile, 1.6"
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 10 Blades - Nitrile - 1-19/32" Diameter Product Description Impeller Kit

Material:Nitrile
Drive Type:Single flat drive
Number of blades:10
Dimensions:

Diameter:

Shaft Width:^5/16"
^{Diameter of shaft:3 /4"}

Insert material:Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subject to rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on the function of the engine. When installed correctly, a wheel can last several years, but it isalways advised to follow a preventative rather than corrective maintenance program.

Replacing the impellers is easy. By removing the screws from the end cover it is possible to remove the impeller using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacingseal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California as causing cancer, birth defects or other reproductive harm. For more information,

Jabsco flexible impellers can be applied to most makes and models of flexible impeller engine cooling pumps in bronze, bilge pumps, transfer pumps and general pumps. Jabsco flexible wheels undergo strict quality control to ensure reliable, efficient and long-lasting performance. Replace all wheels at least once a year or sooner, depending on engine load. If installed correctly, the turbine can last for several years, but it is always recommended to follow a preventive maintenance plan rather thancorrective maintenance. It is easy to replace the turbine. By removing the end cap screws, the Jabsco Impeller Removal Tool or Channel Lock Pliers can be used to remove the impeller to grip the impeller hub. Do not use screwdrivers, as they may damage the surface of the pump body, cause leaks and be dangerous in confined spaces. In case of emergency, be sure to bring a spare wheel on board. The turbine is one of the most important components of the engine cooling system and should always be treated as such. Always grease new wheels. First, it makes it easier to install the impeller into the pump hole; Second, it provides additional protection to the turbine during initial filling. After replacing the seal and cap, the pump can be used. Material: nitrile. Workout type: plan one workoutique. Number of blades: 10. Diameter: 1-19/32". Shaft width: 5/16". Shaft diameter: 0.75 inches. Insert material: brass.

Jabsco Impeller Kit Frequently Asked Questions (FAQ) - 10 Blades - Nitrile - 1-19/32" Diameter Who is Jabsco?
How to Describe the Jabsco Impeller Kit - 10 blades - Nitrile - 1-19/32" diameter?
What is the product type?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small boat for all work boats, for engine cooling, bilge pumping, fresh or waste water management, Jabsco worldwide will provide top quality product. How to describe the J turbine kitabsco - 10 blades - Nitrile - 1- 19/32" diameter? Jabsco flexible impellers can be applied to most makes and models of bronze flexible impeller engine cooling pumps, from bilge pumps, transfer pumps and general pumps Jabsco flexible impellers are subject to strict quality control to ensure reliable, efficient and long-lasting performance. Replace all impellers at least once. per year or earlier, depending on the engine load If installed correctly, the turbine can last several years, but it is always recommended to follow a preventive maintenance plan instead of corrective maintenance. Easy to replace the wheel by removing the end cap screws, the Jabsco wheel removal tool or channel lock pliers can be used to remove the wheel from grip. the turbine. Do not use a screwdriver, as its can damage the surface of the pump body, cause leaks and can be dangerous in confined spaces. In case of emergency, be sure to bring a spare wheel on board. The turbine is one of the most important components of the engine cooling system and should always be treated as such. Always grease new wheels. First, it makes it easier to install the impeller into the pump hole; Second, it provides additional protection to the turbine during initial filling. After replacing the seal and cap, the pump can be used. Material: nitrile. Workout Type: Single Plane Workout Number of blades: 10. Diameter: 1-19/32". Shaft width: 5/16". Shaft diameter: 0.75 inches. Insert material: brass. What is the type of product? Turbines

Save $21 when you purchase the Jabsco Impeller Kit - 10 blades - Nitrile - 1-19/32" in diameter for only $44 at NVN Marine! Same day dispatch before 3 p.m. Jabsco turbine kit - 10 blades - Nitrile - 1-19/32" D.iameter Videos Jabsco turbine kit - 10 blades - Nitrile - 1-19/32" diameter Technical specifications

Type:	Marine Plumbing and Ventilation \| Turbines
Supplier:	Jabsco
Weight:	0.2 lb

Jabsco Impeller Kit - 10 Blades - Nitrile - 1-19/ 32" User Diameter ReviewsJabsco Impeller Kit - 10 Blades - Nitrile - 1-19/32" Diameter Shipping & Returns

Shipping Weight:	0.2 lbs
Box sizes:	1.00 (h) x 4.00 (w ) x 6.00 (l)
Cubic feet:	24.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy. shipping and you can find our return and refund policy here.