Jabsco Impeller Kit 6 Blades Neoprene 1-9/16" Diameter Marine Plumbing & Ventilation
Turbine KitMaterial:Neoprene
Drive Type:Slotted Shaft - Pin Drive
Blade number:6
Dimensions:
- Diameter:1-9/16"
- Shaft Width:15/32"
- Shaft Diameter:3/4"
Insert Material:Brass
Jabsco flexible impellers can be installed on most makes and models of cooling pumps Motor, wedge, transfer and general purpose flexible bronze impeller.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long-lasting performance.
Replace all impellersat least once a year, or sooner, depending on how well the engine is installed, a turbine can last several years, but it is always advisable to stick to a schedule. preventive rather than corrective maintenance.
Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either an impeller removal tool Jabsco channel lock pliers to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.
WARNING: This product can expose you to chemicals, including LEAD, which are recognized by the State of California may cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.
The lift pump in any Rainman system contains a small rubber impeller, which is considered a consumable. Impeller life will vary depending on usage, but in general...
PRODUCT ID: 50241
SKU: NVN-50241
CSKU: CWR-50241
REWRITE: 61352 -jabsco-impeller -kit-6-blade
MPN: 22405-0001-P
UPC: 671880574747
ASIN: B0121FJMH8
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-224050001P
NAME: Jabsco Impeller Kit - 6 Blades - Neoprene - 1-9/16" Diameter
NAME_EX: JABSCO NEOPRENE Impeller KIT 6 Blades 1 9/16 DIA3 /4 W
PTITLE: Jabsco Impeller Kit - 6 Blades - Neoprene - 1-9/16" Diameter
TYPE: Marine Plumbing & Ventilation | Impellers
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Sports
S tayCoolPumps Impeller Kit Replaces Johnson 09-808B-1 Jabsco 22405-0001-P
Title Google: Jabsco Impeller Kit – 6 Blades – Neoprene – 1-9/16" Diameter
Sports
Gtags:
| Jabsco |
GSpecs:
Material:Neoprene
Drive Type:Split shaft - Pin drive
Number of blades:6
Dimensions:
- Diameter:1-9/16"
- Shaft Width:15/32"
- Shaft Diameter:3/4"
Insert Material:Brass
Jabsco flexible impellers can be installed on most makes and models of bronze Flexible Impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subject to quality processes rigorous to ensure reliable, efficient and long-lasting performance.
Replace all turbines at least once a year, or sooner, depending on engine power. When installed correctly, a wheel can last several years, but it is alwaysurs advised to follow a preventative rather than corrective maintenance program.
Replacing the impellers is easy. By removing the screws from the end cover, it is possible to remove the impeller using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the joint and end cover, the pump is ready for use.
This product can expose you to chemicals, including LEAD, which are recognized by the State of California as causing cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.
The lift pump on any Rainman system contains a small rubber impeller, which is considered a consumable. Impeller life varies depending on usage, but in general...
Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 6 Blades - Neoprene - 1- 9/16" diameter Who is the Jabsco?
How to describe the Jabsco turbine kit - 6 blades - Neoprene - 1-9/16" diameter?
Who is the Jabsco? Jabsco is one of the world's leading manufacturers of products for the recreational marine market, including water systems, refrigeration pumpsengine management, searchlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit - 6 Blades - Neoprene - 1-9/16" Diameter? The lift pump on any Rainman system contains a small rubber impeller, which is considered a consumable. The life of the impeller varies depending on use, but in general...
Save $10 when purchasing the Jabsco Impeller Kit - 6 blades - Neoprene - 1-9/16" diameterfor only $22 at NVN Marine! Same day dispatch before 3 p.m. Jabsco Impeller Kit - 6 blades - Neoprene - 1-9/16" diameter Videos Jabsco Impeller Kit - 6 blades - Neoprene - 1-9/16" diameter Technical specificationses
| Type: | Marine plumbing and ventilation | Turbines |
|---|---|
| Supplier: | Jabsco |
| Weight: | 0.1 lb |
| Shipping Weight: | 0.1 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 4.00 (l) x 6.00 (l) |
| Cubic feet: | 24.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
For detailed shipping terms, please see our Shipping Policy and you can find our Return and Refund Policy here.
- Jabsco Impeller Kit 12 Blades Nitrile 2-¼" Diameter
- Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾" Diameter - Plastic Insert - Dual Flat Drive
- Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾" Diameter - Brass Insert - Splined Drive
- Jabsco Impeller Kit 12 Blades Neoprene 3-¾
- Jabsco Impeller Kit 12 Blades Neoprene 2-9/16" Diameter
- Jabsco Impeller Kit 12 Blades Neoprene 2-7/16" Diameter
- Jabsco Impeller Kit 12 Blades Neoprene 2-¼ Diameter
