Jabsco Impeller Kit 12 Blades Neoprene 3-¾ Marine Plumbing & Ventilation

Impeller kit

Material:Neoprene
Drive type:Spline drive
Number of blades: 12
Dimensions:

Diameter:

Shaft Width:1"
Shaft Diameter:3-9/16"

Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of engine cooling pumps, bilge pumps, transfer and general purpose flexible bronze impeller.
Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all impellers
/b> at least once a year, or sooner, depending on the function of the engine. When installed correctly a turbine can last several years, but it is always advisable to follow a preventative maintenance program instead. as corrective.

The remImpeller placement is easy.By removing the end cover. screw, it is possible to remove the impeller using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

WARNING: This product can expose you to chemicals, including LEAD, which is known to the State of California to cause death. cancer, birth defects or other reproductive problems. For more information,

Jabsco

GSpecs:

Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾ Product Description Impeller Kit

Material:Neoprene
Type d 'drive:Splined drive
Number of blades:12
Dimensions:

Diameter:

Shaft Width:1"
Shaft Diameter: 3-9/16"

Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flex impeller, engine cooling, bilge, transfer and general purpose pumps.
Jabsco flex impellers undergo rigorous quality processes to ensure reliable, efficient performance and durable.

Replace all wheels at least once a year, or sooner, depending on the function of the motor. When installed correctly, a wheel can last. several years, but it is always advisable to respect a schedulepreventive maintenance rather than corrective maintenance.

Replacing the turbines is easy.By removing the screw end cover, it is possible to remove the turbine using either a tool Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and end cover, the pompe is ready for use.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive problems. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. When the water is heavily polluted (e.g. oil or diesel), please use a nitrile impeller for pumping and bilge transfer operations. Replace all wheels at least once a year or sooner, depending on engine load. If installed correctly, the turbine can last for several years, but it is always recommended to follow a preventative maintenance plan rather than corrective maintenance.

Frequently asked questions (FAQ) aboutthe Jabsco turbine kit - 12 blades - Neoprene - 3-¾ Who is Jabsco?
How to describe the Jabsco turbine kit - 12 blades - Neoprene - 3-¾?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for Engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to describe the Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. When the water is heavily polluted (e.g. oil or diesel), please use anitrile impeller for pumping and bilge transfer operations. Replace all wheels at least once a year or sooner, depending on engine load. If installed correctly, the turbine can last for several years, but it is always recommended to follow a preventative maintenance plan rather than corrective maintenance.

Save $47 when you purchase the Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾ for only $94 from NVN Marine! Same day dispatch before 3 p.m. Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾ Videos Jabsco Impeller Kit - 12Blade - Neoprene - 3-¾ Technical Specifications

Type:	Marine plumbing and ventilation \| Wheels
Supplier:	Jabsco
Weight:	2.0 lbs

Jabsco Impeller Kit - 12 Blades - Neoprene - 3-¾ Reviews user reviewsTower kitJabsco Bine - 12 Blades - Neoprene - 3-¾ Shipping & Returns

Shipping Weight:	2.0 lbs
Box sizes:	5.00 (h) x 6.00 (w) x 10.00 (w)
Cubic feet:	300.0
Returnable :	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you will find our Return Policy and Refund Policy here.