Sale!
Jabsco turbine kit 12 blades neoprene 2" diameter
Jabsco turbine kit 12 blades neoprene 2" diameter

Jabsco turbine kit 12 blades neoprene 2" diameter

$12

SKU: Jabsco turbine kit 12 blades neoprene 2" diameter
Category:

Jabsco turbine kit 12 blades neoprene 2" diameter Marine Plumbing & Ventilation

Impeller kit

Material:Neoprene
Drive type:Spline drive
Number of blades: 12
Dimensions:
  • Diameter:2-1/4"
  • Shaft Width:1-1/4"
  • Shaft Diameter:5/8"
    Insert Material: Brass


    Jabsco flexible impellers can be installed on most makes and models of engine cooling pumps, bilge pumps, transfer and general purpose flexible bronze impeller.
    Jabsco flexible impellers undergo rigorous quality testing processes to ensure reliable, efficient and long-lasting performance.

    Replace all. the wheelsat least once a year, or sooner, depending on the operation of the engine. When installed correctly, a wheel can last several years, but it is always advisable to follow a maintenance schedule. preventive rather than corrective maintenance.

    Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco Impou removal tool, or channel lock pliers , to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

    Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

    Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

    WARNING: This product can expose you to chemicals, including LEAD, which are known to the State of California may cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.



    Neoprene is the mostIt is a commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use nitrile impellers for pumping bilge water and for...
    PRODUCT ID: 50232
    SKU: NVN-50232
    CSKU: CWR-50232
    REWRITE: 61343-jabsco -impeller-kit-12 -blade
    MPN: 1210-0001-P
    UPC: 671880570718
    ASIN: B002MZNSRI
    WSKU:
    SSKU:
    KSKU:
    GSKU:
    MSKU:
    LSKU: 6-12100001P
    NAME: Jabsco Impeller Kit - 12 Blades - Neoprene - 2-¼" Diameter
    EX_NAME: JABSCO NEOPRENE IMPELLER KIT 12 Blades 2 1/4DIA : VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
    Sports
    Jabsco 1210-0001-P, Neoprene, Drive Type 7, 12 Blades, Diameter 2- 1/4, 1-1/4 Width, 5/8 Shaft, Brass Insert
    Jabsco Impeller Kit - 12 Blades - Neoprene - 2-¼" Diameter
    Sports
    Gtags:
    Jabsco

    GSpecs:

Jabsco Impeller Kit - 12 Blades - Neoprene - 2 Inch Diameter Product Description Turbine Kit

Material:Neoprene
Drive Type:Spline drive
Number of blades:12
Dimensions:
  • Diameter:2-1/4"
  • Shaft Width:1-1/4"
  • Shaft diameter:5/8"
    Insert material:Brass


    Jabsco flexible impellers can be installed on the Most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
    Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance .

    Replace all impellersat least once a year, or sooner, depending on the function of the motor. When installed correctly, an impeller can last. several years, but it is still adviceIt is important to follow a preventative rather than corrective maintenance program.

    Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the turbine using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

    Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

    Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the sealand end cover, the pump is ready for use.

    This product can expose you to chemicals, including LEAD, which is known to the State of California as a causing cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.



    Neoprene isIt is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use nitrile impellers for pumping bilge water and for...

    Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 12 Blades - Neoprene - 2 Inch Diameter Who is the Jabsco?
    How to describe the Jabsco turbine kit - 12 blades - Neoprene - 2-¼" diameter?
    What is the product type?
    Who is the Jabsco? Jabsco is one of the world's leading manufacturers of products for the recreational marine marketrs, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit - 12 Blades - Neoprene - 2-¼" Diameter? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use nitrile impellers for bilge water pumping and... What is the product type?

    Save $16 with the purchase of the Jabsco Impeller Kit - 12 Blades - Neoprene - 2¼" Diameter for only $31 from NVN Marine! Same day dispatch before 3 p.m. Jabsco Impeller Kit - 12blades - Neoprene - 2 inches in diameter. Videos Jabsco turbine kit - 12 blades - Neoprene - 2-. ¼" Diameter Technical Specifications
    Type:

    Marine Plumbing & Ventilation | Impellers
    Supplier:

    Jabsco
    Weight:

    0 .3 lb
    Jabsco Impeller Kit - 12 Blades - Neoprene - 2 Inch Diameter User ReviewsJabsco Impeller Kit - 12 Blades - Neoprene - 2 ¼" diameter Shipping & Returns
    Shipping Weight:

    0.3 lbs
    Box sizes:

    4.00 (h) x 7.00 (w) x 7.00 (w)
    Cubic feet:

    196.0
    Returnable:

    Yes
    USPS First Class:

    Yes
    P65:

    Yes

    For shipping conditionsion details, please see our shipping policy and you can find our returns and refunds. Politics here.

Related products