Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 9 x 18 Bestsellers
XKA aluminum alloy trim tab kit with MLC-1 control - 9 x 18
Lectrotab aluminum alloy trim tabs are specially designed to meet to the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.
Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No componentmust be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.
The Lectrotab MLC-1 is a microprocessor-based trim tab control that can move both tabs simultaneously with the press of a single button. It includes LED tab position indicators that will automatically dim in the dark and light up in the sun.
Features:
- All tabs are sealed with a corrosion-resistant epoxy coating
- Strength equivalent to of 10 gauge stainless steel
- "No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
- Top seal location of the cylinder cannot be damaged due to a cylinderclogged or barnacle growth
- Uses an internal pressure equalization system
- Internal braking system prevents unwanted movement of the tongue while riding or walking rear
- Quiet operation
- Actuators are fully load tested to push at 1,000 pounds of force
- Non-metallic external structure that cannot corrode and will not deteriorate in the sun or under water
Technical specifications:
- Trim size (L x W): 9" x 18" (23 x 46 cm)
- Boat Length: 21' to 30' (6.5 to 9 M)
- Trim Tab Material: Alloy of 6005-T5 marine grade aluminum
- Actuator DC Voltage - 12V
- Actuator Stroke Length - 2.25" (57mm)
- Actuator cable length - 7 m (23 ft)
- Vertical height of actuator - 302 mm (11.875")
- Control dimensions (L x H) - 3.15" x 3.07" (80 x 77 mm)
- Control mounting hole cutout - 2" (50 mm)
- Control operating voltage control - 12 or 24 V
In the box:
- One (1) manual leveling control
- Two (2) aluminum alloy tabs
- Two (2) actuators with 23' (7M) cables
- Instruction manual
*Sold as a kit
Lectrotab XKA aluminum alloy trim tab kit with MLC-1 control - 9 x 18 Product descriptionXKA aluminum alloy trim tab kit with MLC-1 control - 9 x 18
Lectrotab aluminum alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.
Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for installationeasy. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil leaking.t. The actuator incorporates a standard or low profile transom mounting bracket.
The Lectrotab MLC-1 is a microprocessor-based trim tab control that can move both tabs simultaneously with the press of a single button. It includes LED tab position indicators that will automatically dim in the dark and light up in the sun.
Features:
- All tabs are sealed with a corrosion-resistant epoxy coating
- Strength equivalent to 10 gauge stainless steel
- "No Break" polypropylene hinge tested to 300,000 cycles up to one neck90° rbure without failure
- The upper cylinder seal location cannot be damaged due to a dirty cylinder or barnacle growth
- Uses a system internal pressure equalization
- Internal braking system prevents unwanted movement of the tongue while driving or reversing
- Quiet operation
- The Actuators are fully load tested to push at 1,000 pounds of force
- Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water
Technical specifications:
- Trim tab size (L x W) - 9" x 18" (23 x 46 cm)
- Boat Length - 21' to 30' (6.5 to 9 M)
- Trim Material - Marine Grade 6005-T5 Aluminum Alloy
- DC Voltage of actuator - 12 V
- Actuator stroke length - 2.25" (57 mm)
- Actuator cable lengthioner - 23' (7 M)
- Vertical height of actuator - 11.875" (302 mm)
- Control dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
- Control mounting hole cutout - 2" (50 mm)
- Control operating voltage - 12 or 24 V
In the box:
- One (1) manual leveling control
- Two (2) aluminum alloy tabs
- Two (2) actuators with 23' (7M) cables
- Instruction manual
* Sold as a kit
Save $186 when you purchase the Lectrotab XKA Aluminum Alloy Trim Tab Kit with MLC-1 Control - 9 x 18for only $1,054 from NVN Marine!pm. Lectrotab Compensating tabs
Thectrotab
For detailed shipping policy, please check our shipping policy and you can find our return & refund policy here.
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 9 x 12
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 12 x 9
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 12 x 24
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 12 x 18
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 12 x 12
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with ALC-1 Control - 9 x 9
- Lectrotab XKA Aluminum Alloy Decorative Tab Kit with ALC-1 Control - 9 x 24
