Lectrotab XKA Aluminum Alloy Decorative Tab Kit with One-Touch Control - 12 x 18 Bestsellers

XKA Aluminum Alloy Trim Tab Kit with One-Touch Control - 12 x 18

Lectrotab Aluminum Alloy Trim Tabs are specially designed to meet to the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No compositionsant should not be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.package.

Lectrotab's one-touch leveling LED control puts complete control of your trim tabs at your fingertips.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal location of the cylinder cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
The internal braking system prevents any movementunwanted tab while driving or reversing
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or underwater

Technical specifications:

Trim Tab Size (L x W) – 12" x 18" (30 x 46 cm)
Boat Length – 20' to 40' (6 to 12 M)
Trim Tab Material - Marine Grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Toggle Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm)
Toggle Switch Mounting Hole Cutout (H x L) - 2.25" x 2.5" (57 to 64 mm)
Operating voltageRocker Switch Operation - 12 or 24V

In the box:

One (1) toggle switch one touch
Two (2) aluminum alloy tabs
Two (2) actuators with 23' (7M) cables
Operating manual instructions

*Sold as a kit

Lectrotab XKA Aluminum Alloy Trim Kit with One-Touch Control - 12 x 18 Product Description

XKA Aluminum Alloy Trim Tab Kit with One-Touch Control - 12 x 18

Lectrotab aluminum alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation.easy tallation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil escaping. The actuator incorporates a standard or low profile transom mounting bracket.

Lectrotab's one-touch leveling LED control puts complete control of your trim tabs at your fingertips.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal location cylinder cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
Internal braking system prevents unwanted tongue movement while driving or reversing
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim tab size (L x W) - 12" x 18" (30 x 46 cm)
Boat length - 20' to 40' (6 to 12 M)
Trim material - Marine grade 6005-T5 aluminum alloy
Actuator DC voltage - 12 V
Actuator stroke length - 2.25" (57 mm)
Actuator cable length - 23' (7 M)
Vertical height of actuator - 11.875" (302 mm)
Toggle switch dimensions (L x H) - 3" x 3 " (77 x 77 mm)
HoleToggle Switch Mounting Cutout (H x W) - 2.25" x 2.5" (57 to 64 mm)
Toggle Switch Operating Voltage - 12 or 24 V

In the Box:

One (1) one-touch control
Two ( 2) Aluminum alloy tabs
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Save $190 with the purchase of the Lectrotab XKA Aluminum Alloy Trim Tab Kit with Remote Control one touch - 12 x 18for only $1,077 at NVN Marine, same day shipping! before 3:00 p.m. Lectrotab Boat equipment | Compensating tabs Supplier:

Lectrotab

Garn tab kitLectrotab XKA Aluminum Alloy Trim Tab Kit with One Touch Control - 12 x 18 User Reviews Lectrotab detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.