Lectrotab XKA Aluminum Alloy Decorative Tab Kit with One-Touch Control - 9 x 24 Bestsellers

XKA Aluminum Alloy Trim Tab Kit with One Touch Control - 9 x 24

Lectrotab Aluminum Alloy Trim Tabs are specially designed to meet to the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No compositionant must not be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bra.

Lectrotab's one-touch leveling LED control puts complete control of your trim tabs at your fingertips.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal location of the cylinder cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
The internal braking system prevents everything movesUnwanted tab operation while underway or in reverse
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
>Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim Size (L x W) – 9" x 24" (23 x 61 cm)
Boat Length – 24' to 37' (7 to 11 M)
Trim Material - Rine Grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12V
Actuator Stroke Length - 2.25 " (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Toggle Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm)
Toggle Switch Mounting Hole Cutout (H x W) - 2.25" x 2.5" (57 to 64 mm)
Internal operating voltageRocker Switch - 12 or 24V

In the box:

One (1) one-touch control
- li>
- Two (2) aluminum alloy tabs
- Two (2) actuators with 23' (7M) cables
- Instruction manual
*Sold as a kit
Lectrotab XKA Aluminum Alloy Trim Kit with One-Touch Control - 9 x 24 Product Description
XKA Aluminum Alloy Trim Tab Kit with One-Touch Control - 9 x 24

Lectrotab aluminum alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for instaeasy llation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil to leak. The actuator incorporates a standard or low profile transom mounting bracket.

Lectrotab's one-touch leveling LED control puts complete control of your trim tabs at your fingertips.

Features:
- All tabs are sealed with a corrosion-resistant epoxy coating
- Strength equivalent to of 10 gauge stainless steel
- "No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
- Top seal location of the cylinder cannot be damaged due to a dirty cylinder or barnacle growth
- UUses internal pressure equalization system
- Internal braking system prevents unwanted movement of the tongue while driving or reversing
- Quiet operation
- Actuators are fully load tested to push 1,000 lbs of force
- Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water
Technical specifications:
- Trim size (L x W) - 9" x 24" (23 x 61 cm)
- Boat Length – 24 to 37 ft (7 to 11 M)
- Trim Tab Material – Marine Grade 6005-T5 Aluminum Alloy
- DC Voltage of actuator - 12 V
- Actuator stroke length - 2.25" (57 mm)
- Actuator cable length - 23' (7 M)
- Vertical Actuator Height - 11.875" (302 mm)
- Toggle Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm) )
- Cutting the holeToggle Switch Mounting Size (H x W) - 2.25" x 2.5" (57 to 64 mm)
- Toggle Switch Operating Voltage - 12 or 24V
In the box:
- One (1) one-touch control
- Two (2 ) aluminum alloy tabs
- Two (2) actuators with /23' (7M) cables
- Instruction manual
*Sold as a kit

Save $195 when you purchase the Lectrotab XKA Aluminum Alloy Decorative Tab Kit with One-Touch Control - 9 x 24for only $1,108 at NVN Marine, same day shipping before! 3:00 p.m. Lectrotab XKA Aluminum Alloy Decorative Tab Kit with One-Touch Control - 9 x 24 Technical Specifications

Type:
Boat Equipment | Compensating tabs

Supplier:
Lectrotab

Trim tab kitLectrotab XKA Aluminum Alloy Trim Tab Kit with One-Touch Control - 9 x 24 User Reviews Lectrotab detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.

Type:	Boat Equipment \| Compensating tabs
Supplier:	Lectrotab