Lectrotab XKA Aluminum Alloy Decorative Tab Kit with Rocker Switch - 9 x 12 Bestsellers

XKA aluminum alloy trim tab kit with toggle switch - 9 x 12

Lectrotab aluminum alloy trim tabs are specially designed to meet the needs aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No compositionnt should only be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.

Lectrotab's new flat toggle switch features improved sealing to prevent water entry and a recessed toggle to prevent breakage. Specially designed to provide an "instant stop" circuit when the switches are released, preventing actuator overshoot.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal location of the cylinder cannot be damaged due tofrom a clogged cylinder or barnacle growth
Uses an internal pressure equalization system
The internal braking system prevents unwanted movement of the tab during operation road or reverse
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot will not corrode and will not deteriorate in sunlight or under water

Technical specifications:

Tab size of trim (L x W): 9" x 12" (23 x 30 cm)
Boat length: 16' to 25' (5 to 7.5 M)
Material Trim Tab: 6005-T5 Marine Grade Aluminum Alloy
Actuator DC Voltage - 12V
Actuator Stroke Length - 2.25 " (57mm)
Actuator Cable Length - 23' (7M)
Actuator Vertical Height - 11.875" (302mm)
DimensionRocker Switch Mounting Hole Cutout (H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H) x L) - 2.25" x 2" (57.5 x 50 mm)
Toggle switch operating voltage - 12 or 24 V

In the Box:

One (1) Flat Rocker Switch
Two (2) Aluminum Alloy Tabs
Two (2) actuators with 23' (7M) cables
Instruction Manual

*Sold as a Kit

Lectrotab XKA Aluminum Alloy Decorative Tab Kit with Rocker Switch - 9 x 12 Product Description

XKA Aluminum Alloy Decorative Tab Kit with Rocker Switch - 9 x 12

The Lectrotab Aluminum Alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained forur easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking.. The actuator incorporates a standard or low profile transom mounting bracket.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to 10 gauge stainless steel
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
The upper cylinder seal location cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
Internal braking system prevents unwanted tongue movement while driving or reversing
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate when exposed to sunlight or under water. li>

Technical specifications:

Trim tab size (L x W) - 9" x 12" (23 x 30 cm )
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Material - Marine Grade 6005-T5 Aluminum Alloy
Actuator DC voltage - 12 V
Actuator stroke length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Toggle Switch Dimensions ( W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Toggle switch operating voltage - 12 or 24 V

In the box:

One (1) flat rocker switch
Two (2) aluminum alloy tabs
Two (2) actuators with 23' (7M) Cables
Instruction Manual

*Sold as a kit

Save $129 when you purchase the Lectrotab XKA Aluminum Alloy Decorative Tab Kit with Rocker Switch - 9 x 12 for only $731 at from NVN Marine Same day dispatch before 3 p.m. Lectrotab XKA aluminum alloy decorative tab kit with toggle switch - 9 x 1.2 Technical specifications

Type:	Boat equipment \| Compensating tabs
Supplier:	Lectrotab

Lectrotab XKA Aluminum Alloy Trim Tab Kit with Toggle Switch - 9 x 12 User ReviewsLectrotab>For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.