Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 9 x 9 Bestsellers
XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 9
Lectrotab stainless steel trim tab design provides unmatched strength and reliability . All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actionneur incorporates a standard or low profile transom mounting bracket.
Auto Level Control (ALC) will automatically adjust your trim tabs to keep them in a flat boat for a more comfortable and enjoyable ride. Additionally, ALC automatically corrects side-to-side roll and fore-and-aft pitch to enhance your boating experience and improve your fuel economy.
Features :
- Continuous rolled and pinned hinge provides increased strength and eliminates the need for welding
- The location of the cylinder top joint cannot be damaged due to a clogged cylinder or barnacle growth
- Uses internal pressure equalization system
- Internal braking system prevents unwanted movement of the tab by while traveling or in reverse
- Silent operation
- The actuatorss are fully load tested to push 1,000 lbs of force
- Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water
Technical specifications:
- Trim tab size (L x W): 9" x 9" (23 x 23 cm)
- Boat Length - 14' to 19' (4 to 6 M)
- Trim Tabs Material: 12 Gauge, 304 StaiStainless Steel
- Actuator DC Voltage - 12 V
- Actuator stroke length - 2.25" (57 mm)
- Actuator cable length - 23' (7 M)
- Vertical actuator height - 11.875" (302 mm)
- Control dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
- Control Mounting hole cutout - 2" (50 mm)
- Control operating voltage - 12 or 24 V
In the box:
- One (1) automatic leveling control
- Two (2) stainless steel tabsthe
- Two (2) actuators with 23' (7M) cables
- Instruction manual
*Sold as a kit
XKA stainless steel decorative tab kit with ALC-1 control - 9 x 9 p>
The design of Lectrotab stainless steel trim tabs offers unrivaled strength and reliability. All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.
Auto Level Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, ALC automatically corrects side-to-side roll and fore-and-aft pitch to enhance your boating experience and improve your fuel economy.
Features :
- Continuous rolled and pinned hinge provides increased strength and eliminates the need for welding
- The location of the cylinder top joint cannot be damaged due to a dirty cylinder or barnacle growth
- Uses internal pressure equalization system
- Internal braking system prevents unwanted movementadjustable tab while driving or reversing
- Quiet operation
- Actuators are fully load tested to push 1,000 lbs of force
- Structure non-metallic external that cannot corrode and will not deteriorate in sunlight or under water
Technical specifications:
- Trim Tab Size (L x W) - 9" x 9" (23 x 23 cm)
- Boat Length - 14 - 19 ft (4 - 6 M)
- Trim Tab Material - 12 Gauge, 304 Stainless Steel
- Actuator DC Voltage - 12V
- Actuator Stroke Length - 2.25 " (57 mm)
- Actuator cable length - 23' (7 M)
- Actuator vertical height - 11.875" (302 mm)
- Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
- Control Mounting Hole Cutout - 2" (50 mm)
- Control operating voltage - 12 or 24V
In the box:
- One (1) automatic leveling control
- Two (2) stainless steel tabs
- Two (2) actuators with 23' (7M) cables
- Instruction manual
*Sold as a kit
Save $303 when you purchase the Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 9 x 9 for only $1,717 at NVN Marine! Same Day Dispatch by 3:00 PM Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - Technical Specifications 9 x 9
| Type: | Boat outfitter | Compensating tabs |
|---|---|
| Supplier: | Lectrotab |
For detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.
- Lectrotab XKA stainless steel decorative tab kit with ALC-1 control - 9 x 24
- Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 9 x 18
- Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 9 x 12
- Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 12 x 9
- Lectrotab XKA stainless steel decorative tab kit with ALC-1 control - 12 x 18
- Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 12 x 12
- Lectrotab XKA stainless steel tab - 9 x 9
