Lee's Stainless Steel 15° Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube Hunting & Fishing

Rod Holders with Swivel Base

RH579

Half Angle 15°

Stainless Steel Flush Mount with Swivel Base

>Without doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not only does this make sheared rod holder pins a thing of the past, but, more importantly, it allows the rod tip to follow the fish. This reduces the possibility of fraying of thea line and improved drag when the line flows laterally off the tip of the roller rather than over the roller. The rod also removes more easily from the holder since it is not locked to a rigid spindle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2-inch stainless steel locknut at the bottom of the rod holder.

Primarily designed for use with curved stocks, the rod holder has a unique rotating base. When side pressure is applied to the tip of the knife, the pair of rods can be rotated in the rod holder...
PRODUCT ID: 31166
SKU: NVN-31166
CSKU: CWR-31166
REWRITE: 42277-lee-s-150-stainless-steel-swivel-base-flush
MPN: RH579H
UPC: 096811517905
ASIN: B000FOUXAI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lee's 15° Flush Mount Stainless Steel Swivel Base Rod Support 2.25" OD X 10.5" Tube
EX_NAME: LEE'S 15 DEGREE SS FLUSH MOUNT BASE SWIVEL BASE HOLDER 2.25"
PTITLE: Lee's 15° Swivel Base Stainless Steel Flush Mount Rod Holder 2.25" OD X 10.5" Tube
br> TYPE: Hunting & Fishing | Rod Holders
SELLER: Lee's Tackle
SPORTING GOODS> OUTDOOR RECREATION> FISHING
Sports
Lee's 15 Stainless Steel Rotating Base Flush Fishing Rod Holder 2.25" OD X 10.5" Tube
Lee's Tackle RH579H Stainless Steel 15 Degree Swivel Base Flush Mount Rod Holder
Category Amazon: Sports
Gtags:

GSpecs:
br>
Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder, 2.25" OD X 10.5" Tube Product Description Swivel Base Rod Holders

RH579

Half Angle 15°

Stainless Steel Flush Mount with Swivel Base

Without a doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not only does this make sheared rod holder pins a thing of the pastsed, but, more importantly, it allows the rod tip to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line flows sideways off the tip of the roller rather than over the roller. The rod is also more easily removed from the support since it is not locked to a rigid axle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2-inch stainless steel locknut at the bottom of the rod holder.

Primarily designed for use with curved stocks, the rod holder has a unique rotating base. When lateral pressure is applied to the tip of the necktrough, the pair of rods can be rotated in the rod holder...

Lee's 15° Stainless Steel Swivel Base Recessed Rod Holder 2.25" OD X 10.5" Related Products tubesSika Sikaflex 291 Fast-Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 Fast-Cure Adhesive and Sealant 10.3 oz (300 ml) ChariotRidge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge ) - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Aluminum Gray
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - Cartridge 10.3 oz (300 ml) - Colonial White
Sika Sikaflex 505UV High Performance Exterior Grade Polyurethane Sealant - 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 521UV Polyurea Sealantthane LM UV Resistant - 10.3 oz (300 ml) Cartridge - White Frequently Asked Questions (FAQ) about Swivel Base Flush Mount Fishing Rod Holder Lee's 15° Stainless Steel, 2.25" OD 2.25" OD Lee's Stainless Steel 15° Swivel Base Flush Mount Rod Holder, 2.25" OD X 10.5" Tube?
What is the diameter (inches) of the product?
What is the angle of the product?
What is the finish of the product?
Who is Lee's Tackle? For over 85 years, Lee's Tackle has had a well-established reputation for manufacturing the highest quality equipment using the finest marine materials. As threesixth generation, Lee's Tackle is proud to perpetuate its tradition. Whether you own a 15-foot flat skiff or a 120-foot super sport fisherman, you'll find a Lee's Tackle product that meets your needs. How to describe the Lee Support 2.25" OD X 10.5" Tube Stainless Steel 15° Swivel Base Flush Mount Cane? Primarily designed for use with curved stocks, the rod holder has a unique rotating base. When side pressure is appliedAttached to the tip of the knife, the pair of rods can be rotated in the rod holder...How long is the product? (Inch) 12" What is the construction of the product? Stainless SteelHow to mount or what is the mounting style of Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder, Tube 2.25" OD X 10.5" FlushWhat is the diameter (inches) of the product?r />Save $65 when you purchase Lee's Stainless Steel 15° Swivel Base Flush Mount Rod Holder, 2.25" OD X 10.5 Tube "for only $145 from NVN Marine! Same day dispatch before 3 p.m. Lee's 15° Stainless Steel Swivel Base Recessed Rod Holder, 2.25" OD X 10.5" Tube Technical Specifications

Type:	Hunting and fishing \| Rod Holders
Seller:	Lee's Tackle
Weight:	3.1 lbs
Angle:	15 degrees
Construction:	Stainless steel
Diameter (inches):	2-1/4"
Finish:	Polished
Length (inches):	12"
Mounting Style:	Recessed

Lee's 15° Stainless Steel Swivel BaseRecessed Rod Bracket 2.25" OD tr> Shipping Weight:

3.1 lbs

Sizes of boxes:

6.00 (h) x 6.00 (w) x 15.00 (w)

Cubic feet:

540.0

Returnable:

Yes