Lenco 12" x 12" Edgemount Decorative Tab Kit with 12V Standard Touch Switch Boat Outfitting

12" x 12" Edge Mount Trim Tab Kit with Standard Tactile Switch Kit - 12V

Lenco Electric Complete Trim Tab Kits make your boating smoother, drier and faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Edge mount actuators mount to the trailing edge of the aircraft, requiring 4" (10 .16 cm) less transom height than the standard Lenco trim tab assembly.

Lenco trim tab switch kits complete your trim tab system with completely waterproof, maintenance-free tactile switches. and easy to install.

The kit includes:

Sealed self-contained keypad
Control box
Pigtail 36"

Specifications:

Suggested boat length: 17' to 30'
Tab Length: 12"
Tab Width: 12"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch kit: Standard touch
Class: fuel efficient
Compliance: CE certified
Compatibility: any boat
Actuators: 12 volts

WARNING:This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive problems. For more information, go to P65Warnings.ca.gov.

Edge mounting installs the actuator on the rear edge of a flat surface and the height of its workerse is 4 inches lower than standard mounting.
PRODUCT ID: 29309
SKU: NVN-29309
CSKU: CWR-29309
REWRITE: 40420-lenco-12-x-12-edgemount-trim-tab
MPN: 15106- 102
UPC: 874847000178
ASIN: B005IGSWE2
WSKU: LEN15106102
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Kit Lenco 12" x 12" Edge Trim Tab Kit with 12V Standard Touch Switch Kit Lenco 12" x 12" Dashboard with 12V Standard Tactile Switch Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco 12" Trim Mount Kit X 12" with Standard Touch Switch 15106-102
Decor Tab KitLenco 9" x 24" Standard tives without 12V Switch Kit - 15003-101

Gtags:

Lenco

GSpecs:

Lenco 12" x 12" Edge Mount Trim Tab Kit with 12V Standard Touch Switch Kit Product Description

12" x 12" Edge Mount Trim Tab Kit with Standard Touch Switch Kit standard touch switch - - 12V

Lenco complete electric trim tab kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Edge mount actuators mount to the trailing edge of the aircraft, requiring 4" (10 .16 cm) less transom height than the standard Lenco trim tab assembly.

Lenco trim tab switch kits complete your trim tab system with completely waterproof, maintenance-free tactile switches. et easy to install.

Kit includes:

Sealed stand-alone keypad
Control box
Pigtail 36"

Specifications:

Suggested boat length: 17' to 30'
Tab Length: 12"
Tab Width: 12"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch kit: Standard touch
Class: fuel efficient
Compliance: CE certified
Compatibility: any boat
Actuators: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl phthalate (dehp), Known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, see P65Warnings.ca.gov.

Mounting on. edge installs the actuator on the rear edge of'a flat surface and the height of its crosspiece is 4 inches lower than that of the standard assembly.

Lenco 12" x 12" Edge Trim Kit with 12V Standard Touch Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Bracket Lenco compact top mounting bracket - 2 screws 1 thread
Lenco standard top mounting bracket - 3 screws 1 thread
Lencot standard bottom mounting bracket - 3 bolts
Tecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
/>Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL Rudder anode - Aluminum - 3-3/4" diameter

Frequently Asked Questions (FAQ) about Len Compensation Tab Kitco 12" x 12" Trim Mount with Standard Tactile Switch Kit 12V Who is Lenco Marine? How to Describe the Lenco 12" x 12" Trim Mount Tab Kit with Standard Tactile Switch Kit 12 V?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user friendly. How to describe the Lenco 12" x 12" Edgemount Trim Tab Kit with 12V Standard Tactile Switch Kit? Edge mounting installs the actuator on the rear edge of a flat surface and its crosspiece height is 4 inches lower than st mountingandard.

Save $539 when you purchase the Lenco 12" x 12" Edgemount Decorative Tab Kit with 12V Standard Tactile Switch Kit for only $717 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 12" Decorative Tab Kit with 12V Standard Tactile Switch Kit Videos Lenco 12" x 12" Decorative Tab Kit with 12V Standard Tactile Switch Kit Technical Specifications

Type:	Boat outfitter \| Compensating Tabs
Seller:	Lenco Marine
Weight:	21.4 lbs
Product brochure:	Download the PDF

Edgemount Lenco 12" x 12" Trim Tab Kit with 12V Standard Touch Switch Kit User ReviewsLenco Trim Tab Kit 12" x 12" with standard 12V Exp touch switch kitedit and return

Shipping weight:	21.4 lbs
Box sizes:	3.00 (h) x 5.00 (w) x 9.00 (w)
Cubic feet:	135.0
Returnable:	Yes
P65:	Yes

For detailed shipping policy, please see our Shipping Policy and you can find our Return and Refund Policy here.