Lenco 12" x 18" Edge Mount Kit with Standard 12V Tactile Switch Kit Boat Outfitting
Onboard mountingMounts the actuator to the trailing edge of the aircraft, requiring 4" of height less transom than standard fitment
Compensators make the most important difference in how your boat rides and performs. They are optional on some boats but should be as standard as electric trim tabs and tilt make your ride smoother, drier. faster and with increased safety, whether on a small skiff or a mega-yacht, Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly by compared to conventional hydraulic systems. free and environmentally friendly.
- Instant response electric actuators for precise control
- Everything is fully submersible, maintenance free and sealed for life
- The screwSelf-locking balls will not drift, even when moving backwards
- Laser cut 12 gauge stainless steel drift planes
- Corrosion and impact resistant brackets look great despite years of abuse
- Clean installation, saving time and space
- Actuators are high impact, Ultraviolet resistant nylon housing, 50% fiberglass filled
- 316 super polished stainless steel cylinders
Switch kits Standard Solid State Touch Panels with Spreader Feature
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.
Features
- Built-in winding function
- Solid state electronics
- Plug & Play
- Low profile design
- Sealed, self-contained keypad and solid-state control box with waterproof connectors
- Quick and simple installation
- Includes 36" feed pigtail for feed control
- 2" hole cutout size , overall size 2.75" x 2.75'
Each kit contains:
- Standard Tactile Switch Kit
- 2 actuators with 6' cable and Deutsch plugs
- 2 20' actuator extension cable harnesses
- 2 12 gauge stainless steel fin planes
- 2 upper mounting brackets with gland gasket
- 2 lower mounting brackets
- /li>
- All stainless steel mounting hardware
This product can expose you to chemicals including di(2-ethylhexyl) phthalate ( dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.
LED Keypad Replacement f15270001 15271001 LED Touch Switch Keypad Replacement warns you that this product may expose you to chemicals, including diethylethylhexyl phthalate, which is...
PRODUCT ID: 29315
SKU: NVN-29315
CSKU: CWR-29315
REWRITE: 40426-lenco-12-x- 18-edgemount-kit-w-standard
MPN: TT12X18E
UPC: 012301594584
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU :
LSKU:
NAME: Lenco 12" x 18" Edge Mount Kit with 12V Standard Touch Switch Kit
NAME_EX: MOUNT KITLENCO 12" Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES LED Key Replacement Lenco Pad f/15270-001 & 15271-001 [30343-001]
Gtags:
GSpecs:
Lenco 12" x 18" Edge Mount Kit with 12V Standard Touch Switch Kit Product Description Edge Mount
Mounts the actuator to the trailing edge of the aircraft, requiring 4" less transom height than the standard mount
The trim tabs make the most significant difference in how your boat runs and operates. They are optional on some boats but should be standard like electric trim and tilt, Lenco trim tabs make your boat smoother, drier, faster and with added safety whether on a small skiff or a mega -yacht. Lenco's ball screw design is more reliable, three times more powerful and delivers instant response. which makes them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally friendly.
- Electric Actuatorsinstant response for precise control
- Everything is perfect. fully submersible, maintenance free and sealed for life
- Self-locking ball screw will not drift, even when moving backwards
- Cut-to-face stainless steel trim tab plans 12 gauge laser
- Corrosion and impact resistant brackets look great despite years of abuse
- Clean, quick, space-saving installation
br> - Actuators feature a 50% glass fiber filled, impact resistant, ultraviolet resistant nylon housing
- 316 stainless steel cylinders super polished
Standard Solid State Tactile Switch Kits with Gap Function
#15069-001 (124SSR)
For Systems 12 volt single actuator. The control box is waterproof, self-contained, sealed, solid-state, Deutsch-connected for easy Plug & Play installation and features a self-windingtheir integrated. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.
Features
- Integrated winding function
- Solid state electronics
- Plug & Play
- Low profile design
- Sealed, self-contained keypad and solid-state control box with waterprooof connectors
- Quick and simple installation
- Includes a 36" power pigtail for the control box
- 2" hole cutout size, overall size 2.75" x 2.75'
Each kit contains:
- Standard touch switch kit
- 2 actuators with 6' cable and plugs Deutsch
- 2 20' actuator extension wire harnesses
- 2 12 gauge stainless steel fin planes
- 2 upper mounting brackets with gasket
- 2 bottom mounting brackets
- All stainless steel mounting hardware
This product may Expose yourself to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. . For more information,
LED Keypad Replacement f15270001 15271001 LED Touch Switch Keypad Replacement warns you that this product may expose you to chemicals, including diethyl ethylhexan.yl phthalate, which is...
Lenco 12" x 18" Edge Mount Kit with 12V Standard Tactile Switch Kit Related ProductsLenco Top Mount Bracket with Gasket Waterproofing (2008 to present)
Lenco Compact Top Mount Bracket - 2 screws 1 thread
Lenco Standard Top Mount Bracket - 3 screws 1thread
Lenco Standard Lower Mounting Bracket - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/ 16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Anode Tecnoseal R2AL rudder - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" diameter
Frequently asked questions ( FAQ) About Lenco 12" x 18" Edge Mount Kit with 12V Standard Tactile Switch Kit Who is Lenco Marine? How to describe Lenco 12" x 18" Edge Mount Kit with Switch Kit standard 12V touchscreen?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating smoother, drier, fasterof and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 12" x 18" mounting kit with 12V standard touch switch kit? LED Keypad Replacement f15270001 15271001 LED Touch Switch Keypad Replacement warns you that this product may expose you to chemicals including diethylethylhexyl phthalate, which is...
Save $550 when you purchase the Lenco 12" x 18" Edge Mount Kit with 12V Standard Tactile Switch Kit for only $824 at NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 18" mounting kit with standard 12V touch switch Videos Lenco 12&qpas; x 18" Edge Mount Kit with Standard 12V Touch Switch Kit Technical Specificationses
Type: | Boat equipment | Compensating tabs |
---|---|
Supplier: | Lenco Marine |
Weight: | 26.2 lbs |
Product brochure: | Download the PDF |
Shipping Weight: | 26.2 lbs |
---|---|
Box sizes: | 3.00 (h) x 5.00 (w) x 9.00 (w) |
Cubic feet: | 135.0 |
Returnable: | Yes |
P65: | Yes |
For detailed shipping terms, please see our Shipping Policy and you can find ourSee our return and refund policy here.
- Lenco 12" x 18" Edge Mount Trim Tab Kit without Switch Kit 12V
- Lenco 12" x 18" 24V Super Heavy Duty Trim Tab Kit without Switch Kit
- Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit
- Lenco 12" x 12" Standard Trim Kit with 12V Integrated LED Switch
- Lenco 12" x 12" Standard Trim Tab Kit with Dual Toggle Switch
- Lenco 12" x 12" Standard Performance Trim Tab Kit with 12V Standard Touch Switch
- Lenco 12" x 12" Standard Performance Trim Kit without Switch Kit 12V