Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit Boat Outfitting

12" x 9" Edge Mount Trim Tab Kit without Switch Kit - 12V

Electric Edge Mount Trim Tab Kits Lenco make your boating smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Kit Contents:

2 x 12 gauge stainless steel trim tab blades
2 de each of actuators #15054-001 with 6' cables and Deutsch plugs
2 of each of #30133-103 20' actuator extension wire harnesses
2 each of #15085-001 (116) upper mounting brackets with gasket
2 each of #50014-001 (119) lower mounting brackets
1 of each Lenco installation/owner's manual
All necessary stainless steel mounting hardware

Specifications:

Suggested boat length: 14' to 18'
Tab length: 12"
Tab width: 9"
Hinge Height: 2"
Minimum Transom Height: 11"
Blades: 12 gauge stainless steel
Finish:
Smooth switch kit: sold separately
Class: fuel efficient
Compliance: CE certified
Compatibility: any boat
Actuators: 12 volts

This product can expose you to chemicals, including phthalate di(2-ethylhexyl) (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Cutout Label Kit, 12 .Edges gradually increase strength and style. Including (2) SS #12 blade (2)...
PRODUCT ID: 29307
SKU: NVN-29307
CSKU: CWR-29307.
REWRITE: 40418-lenco-12-x -9 Edge Mount Kit
MPN: 15015-101
UPC: 874847004381
ASIN: B00KOEM7BM
WSKU: LEN15015101
SSKU: LEN-15015-101
KSKU: LEN15015101
GSKU:
MSKU:
LSKU:
NAME: Edge Mount Kit Thenco 12" x 9" without 12V switch kit
NAME_EX: LENCO 12" 12V switch
TYPE: Boat fittings | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

LENCO MARINE 15015-101 Trim Tab at edge mountKit without switch - 12" x 9"
Lenco 12 X 9 Edge Mount Kit without switch 12v kit by Hodges Marine

Gtags:

Lenco

GSpecs:

Lenco 12" x 9" Edge Mount Kit without Switch Kit 12V Product Description

12" x 9" Edge Mount Trim Tab Kit without Switch Kit -12V

Lenco Electric Edge Mounting Trim Tab Kits make your boating experience smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Kit contents:

2 12 gauge stainless steel trim tab blades
2 each of actuators #15054-001 with 6' cables and Deutsch plugs
2 each of #30133 -103 20' Actuator Extension Wire Harnesses
2 Top Mounting Brackets #15085-001 (116) with Gasket
2 Bottom Mounting Brackets #50014-001 (119)
1 of each Lenco Owner's/Installation Manual
All necessary stainless steel mounting hardware

Specifications:

Suggested boat length: 14' to 18'
Tab length: 12"
Tab Width: 9"
Hinge Height: 2"
Minimum Transom Height: 11"
Blades: Stainless Steel 12 gauge
Finish: Smooth
Switch kit: sold separately
Class: Fuel efficient
Compliance: CE certified
Compatibility: Any boat
Actuators: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp ), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Cuttable Label Kit, 12 X 9, 12V, Edge Mount, MFG Len-15015-101 , for installing the lower actuator. Ships from 14 to 36. Edges gradually increase strength and style. Including (2) #12 SS Blade (2)...

Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gasket sealing (2008-present)
Lenco Compact Top Mount Bracket - 2 screws 1 thread
Lenco Standard Top Mount Bracket - 3 screws 1 thread
Lenco Standard Bottom Mount Bracket - 3 bolts
br />AnodeTecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3 /4" diameter
Tecnoseal R1AL Rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Anode Tecnoseal R3AL Rudder Kit - Aluminum - 3-3/4" Diameter Frequently Asked Questions (FAQ) About Lenco 12" x 9" Onboard Mount Kit Without Kit 12V switch Who is LencoMarine?
How to describe the Lenco 12" x 9" onboard mounting kit without 12V switch kit?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. The conceptLenco ball screws are more reliable, twice as powerful and have an instant response that makes them very user-friendly. How to describe the Lenco 12" x 9" edge mount kit without 12V switch kit? Cutout Label Kit, 12 X 9, 12V, Edge Mount, MFG Len-15015-101, for Bottom Actuator Installation. Ships from 14 to 36. Edges gradually increase strength and style. Includes (2) #12 SS Blade (2)...

Edge Mount Trim Tab Kit without Switch Kit - 12V
Edge Mount Trim Tab Kits Lenco electric edge-mount trim makes your boat navigation smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is self-aligning and self-centering for easy installation and alignment.
These trim tabs are made from aluminum and stainless steel of thehighest quality for maximum corrosion resistance and durability.

The ball screw is a precision machined screw that moves the trim tab to the desired position.
The trim tab is a small plate that protrudes from the side of the boat and controls the angle of attack of the boat in relation to the waves.
The trim tab kit for edge mounting 12" x 9" without switch kit is perfect for boats with an outboard motor or without an outboard motor.

Save $399 with the purchase of the Lenco 12" x 9" Onboard Mount Kit without 12V Switch Kit for only $507 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit Videos Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit Technical Specificationsns

Type :	Boat equipment \| Comp tabsnsateurs
Seller:	Lenco Marine
Weight:	16.0 lbs
Product Brochure:	Download PDF

Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit User ReviewsLenco 12" x 9 Edge Mount Kit " without 12V switch kit Shipping & Returns

Shipping Weight:	16.0 lbs
Box sizes:	6.00 (h) x 14.00 (w) x 14.00 (w)
Cubic feet:	1176.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms please see our shipping policy and you can find our return and refund policy here.