Lenco 18" x 14" Standard Performance Trim Kit without Switch Kit 12V Boat Outfitting

18" x 14" Standard Performance Trim Tab Kit without Switch Kit - 12V

Upgraded Electropolished Trim Blades with Plus Hinge Pin heavy-duty 1/4" diameter These performance trim tab kits are above the basic level. Lenco standard mounting kits feature the same fast-response electric actuators for precise control with all Deutsch Plug & Play connections. They are electro-polished 12 gauge - 304 SS with 1." raised edges (the 16" x 12" and 18" x 14" have an 85 degree inside taper) and a 1/4" hinge pin diameter Kit includes standard actuators with 5/16" stainless steel bolts. Actuators mount to the trailing edge of the blades

Kit Contents:

2 each of 12 gauge stainless steel trim tabs electro-polished blades
2 each of actuators no. 15054-001 with c6' cable and Deutsch plugs
2 each of 20' Actuator Extension Wire Harness #30133-103
2 Top Mounting Brackets #15085- 001 (#116) with gasket
2 lower mounting brackets #50014-001 (#119)
1 each from Lenco User and Installation Manuals
All necessary stainless steel mounting hardware

Specifications:

Suggested boat length : 22' to 40'
Tab length: 18"
Tab width: 14"
Minimum transom height: 11"
Blades: 12 gauge stainless steel
Finish: Electro-Polished
Switch kit: sold separately
Class: energy efficient fuel
Compliance: CE certified
Compatibility: any boat
Actuators: 12 volts

AWARNING:This product can expose you to chemicals including di(2-ethylhexyl phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other harm reproduction. For more information, visit. P65Warnings.ca.gov.

Fully submersible and precisely controlled electric actuator. Blade is 12# electropolished 304 stainless steel, sloped upward 1 inch (16x12 and 18x14 blades have an internal taper of 85) and is equipped with a 1/4 inch diameter stainless steel hinge screw. stainless steel mounting bracket Minimum backplate height: 9 in. Type L -13.5 in., 12 in. and longer models -11 in. Kit includes: one standard 12 volt actuator (2), with one bolt 5/16 inch stainless steel mounting, 6' wire and Deutsch connector, one act20' ioner extension cable harness (2) with Deutsch connector. Electropolished stainless steel trim - 12 gauge (2). Stainless steel mounting hardware. The switch kit is sold separately.
PRODUCT ID: 29265
SKU: NVN-29265
CSKU: CWR-29265
REWRITE: 40376-lenco-18-x-14-standard-performance-trim
MPN: 15040- 101
UPC: 874847004626
ASIN: B00MYSX7UG
WSKU: LEN15040101
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 18" x 14" Standard Performance Trim Tab Kit No Switch Kit 12V
EX_NAME: LENCO 18" Lenco 18" x 14" without 12V Switch Kit
TYPE: Boat Equipment | Trim Tabs
SUPPLIER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
CategoryAmazon:
New Standard Performance Electric Trim Tab Kit - 12 Volt lenco 15040-101 18" L x 14" W Boat Size 22'-40' 12V
Lenco 18 X 14 Standard Performance Trim Tab Kit WO Switch Kit by Hodges Marine

Gtags:

Lenco

GSpecs:

Lenco 18" x 14" Standard Performance Trim Tab Kit without Switch Kit 12V Product Description

18" x 14" Standard Performance Trim Tab Kit without Switch Kit - 12V

Upgraded electropolished trim blades with a sturdier 1/4" diameter hinge pin make these performance trim tab kits a step above the basic level of kits Standard Lenco mounting blades Equipped with the same fast-response electric actuators for precise control Fully submersible with all Deutsch Plug & Play connections. Blades are 12 gauge - 304 SS electro-polished with 1" raised edges. 16" x 12" and the 18" x 14" have an 85 degree inside taper) and a 1/4" diameter hinge pin. Kit includes standard actuators with 5/16" SS bolts. Actuators mount on the trailing edge of the blades

Kit contents:

2 each of electro-polished 12 gauge stainless steel trim tabs
2 each of actuators #15054-001 with 6' cable and Deutsch plugs
2 of each of actuators #30133-103 of 20'R extension wire harnesses
2 of each top mounting bracket #15085-001 (#116) with gasket
2 each of Lower Mounting Brackets #50014-001 (#119)
1 Lenco Installation/Owner's Manual
All necessary stainless steel mounting hardware

Specifications:

Suggested boat length: 22' to 40'
Tab length : 18"
Tab Width: 14"
Minimum Transom Height: 11"
Blades: 12 gauge stainless steel
Finish: Electropolished
Switch kit: sold separately
Class: Fuel efficient
Conformity: CE certified
Compatibility: Allboat
Actuators: 12 volts

This product can expose you to chemicals including di(2- ethylhexyl (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Fully submersible, precise well-controlled electric actuator All Deutsch plug-and-play connections Blade is 12# electropolished 304 stainless steel, tilted up 1 inch (16x12 and 18x14 blades have a. 85 internal taper) and is equipped with a 1/4 inch diameter stainless steel hinge. Minimum backplate height: 9 in. Type L -13.5 in., Models 12. inches and longer -11 inches Kit includes: standard 12 volt actuator (2), with 5/16 stainless steel mounting boltinch, 6' wire and Deutsch connector, 20' actuator extension wire harness (2) with Deutsch connector. Electropolished stainless steel trim - 12 gauge (2). Stainless steel mounting hardware. The switch kit is sold separately.

Lenco 18" x 14" Standard Performance Trim Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Bracket Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mount Bracket - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
/>Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter

Frequently Asked Questions (FAQ) about Rudder Tab Kit Lenco 18" x 14" Standard Performance Trim with /o Switch Kit 12V Who is Lenco Marine?>Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boat ride smoother, drier, faster and with increased safety, whether on a performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, two times more powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 18" x 14" Standard Performance Trim Tab Kit without 12V Switch Kit? Electric actuatorFully submersible and precisely controlled electric. All Deutsch plug-and-play connections. The blade is 12# electropolished 304 stainless steel, angled upward 1 inch (16x12 and 18x14 blades have an internal taper of 85) and is equipped with a 1/4 inch diameter stainless steel hinge. Stainless steel mounting screws. Minimum Backplate Height: 9 in. L Type -13.5 in., 12 in. and Longer Models -11 in. Kit Includes: Standard 12 Volt Actuator (2), with 5 in. Stainless Steel Mounting Bolt /16 inch, 6' wire and Deutsch connector, 20' actuator extension wire harness (2) with Deutsch connector. Electropolished stainless steel trim - 12 gauge (2). Stainless steel mounting hardware. The switch kit is sold separately.

Save $551 when you purchase the Lenco 18" x 14 Standard Performance Trim Tab Kit" without 12V Switch Kit for only $825 at NVN Marine! Same day shipping before 3pm. Lenco 18" x 14" Standard Performance Trim Tab Kit without kit d '12V switch Technical specifications

Type:	Boat equipment \| Compensator tabs
Seller:	Lenco Marine
Weight:	31.0 lb
Product brochure:	Download PDF

Lenco 18" x 14" Standard Performance Trim Tab Kit w/o 12V Switch Kit User ReviewsLenco 18" x 14" Standard Performance Trim Tab Kit w/o 12V Switch Kit Shipping and return

Shipping weight:	31.0 lbs
Box sizes:	9.00 (h) x 19.00 (w) x 24.00 (w)
Cubic feet:	4104.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please review our shipping policy and you can find our return and refund policy here.