Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit Boat Outfitting

Deck Mount Trim Tab Kit with LED Indicator Switch Kit

Lenco Electric Edge Mount Trim Tab Kits Make Your Boat Sailing Smoother , drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Suggested Boat Length:16'-25'
L" x W":9" x 12"
Hinge Height: 2"
Height mtransom minimum: 13.5"

Kit Contents

2 12 gauge stainless steel trim tab blades
2 each of actuator #15054-001 with 6' cables and Deutsch plugs
2 each of 20' actuator #30133-103 extensionconnecting wire harnesses
2 top mounting brackets #15085-001 (116) with gasket
2 top mounting brackets No. 50014-001 (119)
2 each of lower mounting brackets No. 50014-001 (119) mounting brackets
1 user manual Lenco Use/Installation
All necessary stainless steel mounting hardware

Specifications:

Blades: 12 gauge stainless steel
Finish:Smooth
Class: Fuel efficient
Conformity: CE certified
Compatibility: Any boat

LED Indicator Switch Kit

With integrated winding and self-checking functions for single actuator systems / 12 and 24 volts

Lenco waterproof trim tab tactile switch kits complete your trim tab system with completely waterproof, maintenance-free and easy to install tactile switches. .

The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof and has an overmolded connector to eliminate water intrusion. DIRECTED. Indicator lights let you know exactly where your trim tabs are located at all times. A backlit keyboard automatically illuminates graphics for nighttime viewing. A photo eye reads ambient light and adjusts the intensity of the indicator for optimal viewing in all lighting conditions.

The standard tactile switch is built to the same exacting standards as indicator switches.

Kit Contents

Sealed Self-Contained Keypad
Control box
36 inch power pigtail.

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp) , known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, see P65Warnings.ca.gov.

The kit. LENCO 9-inch electric daggerboard makes your sailing smooth, dry and faster, and increases safety, whether on a small boat or a large yacht This...
PRODUCT ID: 56426
. SKU: NVN-56426
CSKU: CWR-56426
REWRITE: 67537-lenco-9-x-12-edge-mount-trim
MPN: TT9X12EI
UPC: 649664625749
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit
NAME_EX: LENCO 9" Edge Mount Trim Tab KIT x 12" with LED Indicator
PTITLE: Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 9 " x 12" Edge Trim Kit with LED Indicator Switch Kit - TT9X12EI
Amazony Category:
Gtags:

Lenco

Specifications G:

Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit Product Description Edge Mount Trim Tab Kit with LED Indicator Switch Kit

Lenco Electric Edge Mount Trim Tab Kits make your boating smoother, drier, faster and with added safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Length dSuggested Boat:16'-25'
L" x W": 9" x 12"
Hinge Height: 2 "
Minimum transom height: 13.5"

Kit contents

2 shutter slats 12 gauge stainless steel compensator
2 of each of #Actuator 15054-001 with 6' cables and Deutsch plugs
2 of each of the harnesses 20' actuator extension cables #30133-103
2 each of #15085-001 (116) top mounting brackets with gasket
2 of each of the lower mounting brackets #50014-001 (119)
1 of each of the lower mounting brackets Lenco / installation manual
All necessary stainless steel mounting hardware

Specifications:

Blades: 12 gauge stainless steel
Finish: Smooth
Class: Fuel efficient
Compliance: CE certified
Compatibility: Any Boat

LED Indicator Switch Kit

With integrated retractor and self-checking features for single actuator / 12 and 24 volt systems

Lenco waterproof trim tab tactile switch kits complete your trim tab system with tactile switches totally waterproof, maintenance free and easy to install.

The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof and has an overmolded connector to eliminate water intrusion. DIRECTED. Indicator lights let you know exactly where your trim tabs are located at all times. A backlit keyboard automatically illuminates graphics for nighttime viewing. A photo eye reads ambient light and adjusts the intensity of the indicator for optimal viewing ins all lighting conditions.

The standard touch switch is built to the same exacting standards as indicator switches.

Kit Contents

Sealed, self-contained keyboard
Control box
36-inch power pigtail.

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, childbirth. defects or other reproduction problems. For more information,

Lenco 9 inch electric fin kit makes your boating more enjoyable.smooth, dry and fast, and increases safety, whether on a small boat or a large yacht. This...

Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit Related ProductsBracketLenco Top Mount with Gland Gasket (2008-Present)
Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Top Mount Bracket Lenco Standard Bottom Mount - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1- 7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2- 13/16" diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" diameter

Frequently Asked Questions Questions (FAQ) about Lenco 9" x 12" Dash Mount Trim Tab Kit with LED Indicator Switch Kit Who is the LencoMarine? How to describe the Lenco 9" Dash Mount Trim Kit x 12" with LED indicator switch kit?
Whatis the construction of the product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit? LENCO 9 inch electric daggerboard kit makes your sailing smooth, dry and faster, and increases safety, whether on a small boat or a large yacht. This... What is the construction of the product? Stainless Steel

Save $573 when you purchase the Sub-Mount Trim Tab Kitrboard Lenco 9" x 12" with LEDIndicator Switch Kitfor only $858 from NVN Marine! Same day dispatch before 3 p.m. Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit Technical Specifications

Type:	Equipment of boat \| Compensating Tabs
Seller:	Lenco Marine
Weight:	18.5 lbs
Construction:	Stainless steel

Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit User ReviewsTrim Tab Kit Lenco 9" x 12" Dash Mount with LED Turn Signal Switch Kit Shipping & Returns

Shipping Weight:	18.5 lb
Box sizes:	3.00 (h) x 5.00 (w) x 10.00 (l)
Cubic feet:	150.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return Policy. and refund policy here.