Lenco 9" x 9" Edgemount Trim Tab Kit with 12V Standard Touch Switch Kit Boat Outfitting

Onboard mounting

Mounts the actuator to the trailing edge of the aircraft, requiring 4" of height less transom than standard fitment

Compensators make the most important difference in how your boat rides and performs. They are optional on some boats but should be as standard as electric trim tabs and tilt make your ride smoother, drier. faster and with increased safety, whether on a small skiff or a mega-yacht, Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly by compared to conventional hydraulic systems. free and environmentally friendly.

Instant response electric actuators for precise control
Everything is fully submersible, maintenance free and sealed for life
The screwSelf-locking balls will not drift, even when moving backwards
Laser cut 12 gauge stainless steel drift planes
Corrosion and impact resistant brackets look great despite years of abuse
Clean installation, saving time and space
Actuators are high impact, Ultraviolet resistant nylon housing, 50% fiberglass filled
316 super polished stainless steel cylinders

Switch kits Standard Solid State Touch Panels with Spreader Feature
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Built-in winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keypad and solid-state control box with waterproof connectors
Simple and quick installation
Includes tail 36" feed pig plug for beef control
2" hole cutout size, overall size 2.75" x 2.75'

Each kit contains:

Standard touch switch kit
2 actuators with 6' cable and Deutsch plugs
2 extension cable harnesses 20' Actuator Mount
2 12 gauge stainless steel fin planes
2 top mounting brackets with gland seal
2 bottom mounting brackets
/li>
All stainless steel mounting hardware

This product can expose you to chemicals including di(2-ethylhexyl) phthalate ( dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Lenco 9" x 9" Edge Mount Tab Kit with 12V Standard Tactile Switch Kit. The Edge mount allows the actuator to be mounted on the back edge of a flat surface, and the required backplate height is 4" less. and the standard mounting frame.
PRODUCT ID: 29282
SKU: NVN-29282
CSKU: CWR-29282
REWRITE: 40393-lenco-9-x-9-edgemount-trim-tab
MPN: TT9X9E
br> UPC: 005851292727
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 9" Edgemount Trim Tab Kitwith Standard 12V Touch Switch Kit
NAME_EX: LENCO 9"X9" EDGE MOUNT KIT WITH TOUCH SWITCH
PTITLE: Lenco 9" x 9" Edgemount Trim Tab Kit with Touch Switch Kit standard 12 V
TYPE: Boat fittings | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 9 " x 9" Edgemount Decorative Tab Kit with 12V Standard Tactile Switch Kit - TT9X9E

Gtags:

Lenco

GSpecs:

Lenco 9" x 9" Edge Trim Kit with 12V Standard Touch Switch Kit Product Description Edge Mount

Mounts the actuator to the trailing edge of the plane, requiring 4" less transom height than standard mounting

Trimming tabs make the most important difference in how your boat handles runs and works. They are optional on some boats but should be standard with electric trim and tilt, Lenco trim tabs make your boat smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and has an instant. response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally friendly.

Electric ActuatorsInstant response for precise control
Everything is fully submersible, maintenance free and sealed for life
Self-locking ball screw will not drift, even when moving backwards
12 gauge laser cut stainless steel trim tab plans
High impact corrosion resistant brackets look great despite years of abuse
br>
Clean, quick and space-saving installation
Actuators feature an ultraviolet-resistant nylon housing , 50% fiberglass filled and impact resistant
316 super polished stainless steel actuators

Tactile switch kits Standard semiconductor with gap function
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid-state, Deutsch-connected for easy Plug & Play installation.t has an integrated winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keypad and solid-state control box with waterproof connectors
Quick and simple installation
Includes a 36" power pigtail for control box
2" hole cutout size, overall size 2.75" x 2.75'

Each kit contains:

Standard touch switch kit
2 actuators with 6' cable and Deutsch plugs
2 20' actuator extension wire harnesses
2 12 gauge stainless steel fin planes
2 upper mounting brackets with gasketsealing
2 bottom mounting brackets
All stainless steel mounting hardware

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,

The Lenco 9" x 9" Edge Mount Tab Kit with 12V Standard Tactile Switch Kit allows to mount the actuator on the rear edge of a. flat surface and the required backplate height is 4" less than the standard mounting frame.

Lenco 9" x 9" Edgemount Trim Tab Kit with Standard 12V Touch Switch Kit Products Related Lenco Top Mount Bracket with Gland Gasket (2008 - Present)
Lenco Compact Top Mount Bracket - 2 Screws1 thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
Tecnoseal R1 rudder Anode - Zinc - 1-7/8" diameter
br />Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" Diameter
/>

Frequently Asked Questions (FAQ) about Lenco 9" x 9" Edgemount Decorative Tab Kit with 12V Standard Tactile Switch Kit Who is Lenco Marine?
How to Describe Lenco 9"Edgemount x 9" Trim Tab Kit with 12V Standard Touch Switch Kit?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate.will ion. Lenco trim tabs will make your boat run smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe Lenco 9. " x 9" Edge Mount Tab Kit with 12V Standard Tactile Switch Kit? The Lenco 9" x 9" Edge Mount Tab Kit with Standard 12V Tactile Switch Kit mounts the actuator to the rear edge of a flat, elevated surface. of required backplate is 4" less than the standard mounting frame.

Save $473 when you purchase the 9" Edgemount Decorative Tab Kit x 9" Lenco with 12V Standard Tactile Switch Kitfor only $709 from NVN Marine! Same day shipping before 3pm. KitLenco 9" x 9" Decorative Tab Kit with 12V Standard Tactile Switch Kit Videos Lenco 9" x 9" Decorative Tab Kit with 12V Standard Tactile Switch Kit Technical Specifications

Type:	Boat outfitter \| Compensating Tabs
Seller:	Lenco Marine
Weight:	16.4 lbs
Product brochure:	Download the PDF

Lenco 9" x 9" Edge Mount Decorative Tab Kit with 12V Standard Tactile Switch Kit Tactile Switch Kit 12V Shipping & Returns

Shipping Weight:	16.4 lbs
Box sizes:	3.00 (h) x 5.00 (w) x 9.00 (w)
Cubic feet:	135.0
Returnable:	Yes
P65:	Yes