Lenco Auto Glide Boat Leveling System for Single Actuator Tab Systems Boat Outfitting
Auto Glide is an automatic boat leveling system that uses sophisticated accelerometers, gyroscopes and advanced software to optimize vessel performance. Auto Glide keeps the boat level at all times, regardless of cruising speeds. It has the ability to use GPS data and engine data to navigate the vessel at the most efficient sailing angle. Proper use of trim tabs makes a huge difference in boat performance. We developed Auto Glide to maximize the benefits of trim tabs while simplifying operation and control. Auto Glide constantly strives to make your boat the best it can be, providing a smoother, smoother and more comfortable ride.
Lenco 15500101 Attributes- Compatibility: Single Actuator Trim Tab Systems
- Type: Automatic
- For single actuator trim tab systems
- For boats without existing NMEA 2000 networks
- Advanced software to optimize vessel CE performance
- Auto Glide keeps the boat level at all times, regardless of cruising speeds
- 5-year limited warranty
- Auto Glide Quick Reference Guide_TCHDAT.pdf
Auto Glide Boat Leveling System
A true boat leveling system automatic boat/trim tab control that actually works - completely and automatically!
The Auto Glide system controls your trim tabs from the moment you leave your dock until you return home!
Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjustingmaintaining your Lenco trim tabs according to your needs. This optimal running angle is determined during the setup process after installing your Auto Glide system.
Imagine your boat's running angle is measured 25 times per second and that data is used by the new Auto Glide control. box to:
- Automatically place your boat in the most efficient running angle.
- Reduce the amount of bow lift on your boat during holeshot mode.
- Eliminate bow porpoising (bow bounce).
- Keep your boat level at all times.
These actions will result in a smoother ride and the best possible fuel efficiency.
The Auto Glide has 3 automatic operating modes, 4 settings automatic and 2 manual operating modes. Although you probably keep your Auto Glide in automatic mode,you can immediately switch to manual mode by simply pressing one of the 4 up/down buttons on the keyboard.
The main components are the Auto Glide key. Pad, the Auto Glide control box, the main control box harness and various cables. These cables connect the Auto Glide system to your engine(s), GPS unit, network, and/or a standalone GPS antenna/receiver.
The boat must be equipped with the Auto Glide system. Lenco single fin with Lenco Electric. Actuators. It is a MUST in all applications.
For aftermarket systems:
- The Lenco Glide system will work on ALL boats with ALL engines. GPS data is used to provide data to the control box. An optional connection to the NMEA 2000 network is included. For OEM system:
For OEM system:
- Connection to analog network systems is available.
- The coConnection to CANbus based motors is available. See list below.
- Boat must have a NMEA 2000 GPS network or NMEA 2000 antenna receiver.
- NMEA 0183 will work, but will have slower signal response. Lenco offers an optional NMEA 2000 GPS antenna receiver and stainless steel mounting bracket.
Kit contains
1 30254 -001D Auto Glide Keypad Control
1 30255-001 Single Actuator Auto Glide Control Box
1 30248-001 Single Actuator Auto Glide Control Box Harness
1 30259-001D CAN Bus No. 1 NMEA2000 cable - 2.5'
1 30262-001D GPS/NMEA 2000 CAN bus network adapter cable No. 2 - 2.5'
1 30266-001 GPS NMEA 2000Antenna only
3 30267 -001D T-Connector Only
2 30268-001D Terminating Resistor - Female
1 30268-002D Terminating Resistor - Male
1 30281-001D Power Cable - NMEA Network2000 2.5'
Available for these CANbus based motors:
NMEA2000 motors
- Yamaha (Command Link Plus requires NMEA 2000 / Yamaha Gateway P/N: 6Y98A2D00000)
- Evinrude
- Honda
- Suzuki
E - Volvo Penta (non-EVC engines) (with a Volvo NMEA2000 gateway - Volvo P/N 3889757)
J1939 engines
- Volvo Penta (EVC engines)
- Yanmar
- Caterpillar
- Cummins
- Detroit Diesel
- John Deere
- Steyr
SmartCraft Engines
- Mercury - Verado
- Mercury - Optimax with SmartCraft ECU
- Mercruiser with SmartCraft ECU
- Cummins/Mercruiser with SmartCraft ECU
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defectsongenital or other reproductive problems. For more information,
Advanced solid-state electronics can monitor your onboard systems and continue working hard to improve performance and the economy. The system can be used for new or renovated installations. Before takeoff, these ailerons will be automatically lowered to reduce bow lifting and boarding time. Once the aircraft is boarded, it will automatically be leveled and secured in this location. It's that simple! The configuration is very simple, it can use all or part of the data from other devices (such as GPS speed, engine speed, fuel consumption, etc.) to always maintain the best driving angle. Two preset manual positions can be stored for use in standing water or at different speeds. The special "hold" function can nowmaintain the vessel's rolling position until the power is turned off. Manual control is also very simple; just click the up or down button. All of these operations are controlled by a 6" x 6" x 2" enclosure fully submerged in water, which contains three gyroscopes and three accelerometers with waterproof connections and components.
PRODUCT ID: 50942
SKU: NVN -50942
CSKU: CWR-50942
REWRITE: 62053-lenco-auto-glide-boat-leveling-system-f
MPN: 15500-101
UPC: 874847006712
ASIN: B007D2JK90
WSKU: LEN15500101
SSKU:
KSKU: LEN15500101
GSKU:
MSKU:
LSKU: 622-15500101
NAME: Lenco Auto Glide Boat Leveling System for Systems of single actuator tabs
br>EX_NAME: LENCO AUTO GLIDE BOAT LEVELING SYSTEM F/SINGLE ACTUATOR
PTITLE: Lenco Auto Glide Boat Leveling System f/single actuator tab systems
TYPE: Boat fittings
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Lenco 15500-101 Auto Glide Kit, Single Act, with GPS and N2K
br> Enco Auto Glide Boat Leveling System for Single Actuator Tab Systems
Gtags:
| Lenco |
GSpecs:
Lenco Auto Glide Boat Leveling System for Single Actuator Tab Systems Product Description
Auto Glide is an automatic boat leveling system that uses accelerometers, gyroscopes and sophisticated advanced software to optimize vessel performance. Auto Glide keeps the boat level at all times, regardless of cruising speeds. It has the ability to use GPS data and engine data to navigate the vessel at the most efficient sailing angle. Proper use of trim tabs makes a huge difference in boat performance. We developed Auto Glide to maximize the benefits of trim tabs while simplifying operation and control. Auto Glide constantly strives to make your boat the best it can be, providing a smoother, smoother, more comfortable ride.
Lenco 15500101 Attributes- Compatibility: Single actuator trim tab systems
- Type: Automatic
- For single actuator trim tab systems
- For boats without existing NMEA 2000 networks
- Advanced software to optimize vessel performance
- Auto Glide keeps the boat level at all times, regardless of cruising speeds
- 5-year limited warranty
- Auto Glide Quick Reference Guide_TCHDAT.pdf
Automatic Boat Leveling System
A true automatic boat control system / trim control system that actually works - completely and automatically!
The Auto Glide system controls your trim tabs from the moment you leave your dock until 'to yourback home!
Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your trim tabs Lenco according to your needs. This optimal operating angle is determined during the setup process after installing your Auto Glide system.
Imagine The sailing angle of your boat is measured 25 times per second and this data is used by the new Auto Glide control box to:
- Automatically place your boat in the most efficient sailing angle.
- Reduce the amount of elevation from the bow of your boat during Hole mode Shot.
- Eliminate bow porpoising (bow bounce).
- Keep your boat level at all times.
These actions will result in a smoother ride and the best energy efficiency possibleible.
The Auto Glide has 3 operational automatic controls. modes, 4 automatic settings and 2 manual operating modes. Although you will probably keep your Auto Glide in automatic mode, you can immediately switch to manual mode by simply pressing one of the 4 up/down buttons on the keypad.
The main components are the Auto Glide key. Pad, the Auto Glide control box, the main control box harness and various cables. These cables connect the Auto Glide system to your engine(s), GPS unit, network, and/or a stand-alone GPS antenna/receiver.
The boat must be equipped with an auto glide system. Single Lenco trim tab with Lenco electric actuators. It is a MUST in all applications.
For aftermarket systems:
- The Lenco Glide system will work on ALL boats with ALL engines. GPS data is used to provide data to thecontrol box. An optional connection to the NMEA 2000 network is included. For OEM system:
For OEM system:
- Connection to analog network systems is available.
- Connection to CANbus based motors is available. See list below.
- Boat must have a NMEA 2000 GPS network or NMEA 2000 antenna receiver.
- NMEA 0183 will work, but will have slower signal response. Lenco offers an optional NMEA 2000 GPS antenna receiver and stainless steel mounting bracket.
Kit contains
1 30254 -001D Auto Glide Keypad Control
1 30255-001 Auto Glide Control Box for Single Actuator
1 30248-001 Auto Glide Control Box Harness for Single Actuator
1 30259-001D NMEA2000 Cable n°1 for CAN bus - 2.5'
1 30262-001D GPS/NMEA 2000 network adapter cable n°2 for CAN bus - 2.5'
1 30266-001 NMEA 2000 GPS Antenna only
3 30267-001D T-connector only
2 30268-001D Terminating Resistor - Female
1 30268-002D Terminating Resistor - Male
1 30281-001D Power Cable - NMEA 2000 Network 2.5'
Available for these CANbus based motors:
Motors NMEA2000
- Yamaha (Command Link Plus requires NMEA 2000 / Yamaha Gateway P/N: 6Y98A2D00000)
- Evinrude
- Honda
- Suzuki
E - Volvo Penta (non-EVC engines) (with Volvo NMEA2000 gateway - Volvo P/N 3889757)
J1939 engines
- Volvo Penta (EVC engines)
- Yanmar
- Caterpillar
- Cummins
- Detroit Diesel
- John Deere
- Steyr
SmartCraft engines
- Mercure - Verado
- Mercure - Optimax with SmartCraft calculator
- Mercruiser with SmartCraft ECU
- Cummins/Mercruiser with SmartCraft ECU
This product can expose you to chemicals, including di(2-ethylhexyl) phthalate (dehp), known by State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Advanced solid-state electronics can monitor your onboard systems and continue working hard to improve performance and the economy. The system can be used for new or renovated installations. Before takeoff, these ailerons will be automatically lowered to reduce bow lifting and boarding time. Once the aircraft is boarded, it will automatically be leveled and secured in this location. It's that simple! The configuration is very simple, it can use all or part of the data from other devices (such as GPS speed, engine speed, consumptionfuel, etc.) to always maintain the best driving angle. Two preset manual positions can be stored for use in stagnant water or different speeds. The special "hold" function can hold the ship's rolling position until the power is turned off. Manual control is also very simple; just click the up or down button. All of these operations are controlled by a 6" x 6" x 2" housing fully submerged in water, which contains three gyroscopes and three accelerometers with waterproof connections and components.
Boat leveling system Lenco Auto Glide f/ Single Actuator Tab Systems Related ProductsLenco Auto Glide Adapter Cable for SmartCraft / Mercury - 2.5'
Lenco Auto Glide Adapter Cable for /Command Link / Yamaha - 2.5'
Lenco Auto Glide f/J1939 adapter cable - 2.5'
Lenco Auto Glide CANbus#1 NMEA2000 adapter cable - 2.5'
Cablee Lenco Auto Glide CANbus #2 GPS/NMEA 2000 adapter - 2.5'
Lenco Auto Glide adapter extension cable - 10'
Extension cable for Lenco Auto Glide adapter - 20'
Extension cable for Lenco Auto Glide adapter - 30'
Extension cable for Lenco Auto Glide adapter - 40'
Lenco Extension cable for Auto Glide adapter - 50'
Frequently Asked Questions (FAQ) about the Lenco Auto Glide Boat Leveling System for Single Actuator Tab Systems Who is Lenco Marine?
How to Describe the Lenco Auto Boat Leveling System Glide for single actuator tab systems?
What is the product type?
What is the weight of the product?
How compatible is this product? product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your navigation in batsofter, drier, faster water and with increased safety, whether on a performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco Auto Glide Boat Leveling System for Single Actuator Tab Systems? Advanced solid-state electronics can monitor your onboard systems and continue working hard to improve performance and economy. The system can be used for new or renovated installations. Before takeoff, these ailerons will be automatically lowered to reduce bow lifting and boarding time. Once the aircraft is boarded, it will automatically be leveled and secured in this location. It's that simple! The configuration is very simple, it can use all or part of the data from other devices (like GPS speed, rengine speed, fuel consumption, etc.) to always maintain the best driving angle. Two preset manual positions can be stored for use in standing water or at different speeds. The special "hold" function can hold the ship's rolling position until the power is turned off. Manual control is also very simple; just click the up or down button. All of these operations are controlled by a 6" x 6" x 2" enclosure fully submerged in water, which contains three gyroscopes and three accelerometers with waterproof connections and components.
- Never worry about the trim your boat!
- No more manual adjustments or worries about your boat's trim.
- Keeps your boat level and in control whatever the conditions.
- The Auto Glide system is the most automatic leveling system and innovative boat on the market.
- The Auto Glide system is a complete automatic trim control system, with no moving parts or complicated electronics.
- It is easy to install and operates automatically from the moment you leave your dock until you return home!
The Lenco Auto Glide Boat Leveling Kit is perfect for any boat with a Single actuator trim tab. It is the only automatic boat leveling system on the market that is fully compatible with NMEA 2000 networks and controllable from your smartphone.
What is the product type? Automatic- Never worry about trim on your boat again!
- No more manual adjustments or worrying about trim on your boat.
- Maintains your boat level and under control, whatever the conditions. conditions.
- The Auto Glide system is the leveling systemmost innovative boat automatic on the market.
- The Auto Glide system is a complete automatic trim tab control system, with no moving parts or complicated electronics.
- It is easy to install and works automatically from the moment you leave your dock until you return home!
- Lenco Auto Glide Kit with GPS Antenna and Network - For Single Actuator Trim Tab Systems
- For boats without existing NMEA 2000 networks
- Auto Glide is an automatic boat leveling system that uses a compensator and ballast water tank to keep the boat level.
- It automatically adjusts the trim to counteract boat tilt by moving ballast water from one side to the other.
- Fully automatic boat leveling system which requires no human intervention.
- The only leveling system of theboat system available for single actuator trim tabs without an existing NMEA 2000 network.
- Comes with a GPS antenna and network cable to connect the unit to an existing NMEA 2000 network.
Save $1,099 when you purchase the Lenco Auto Glide Boat Leveling System for Single Actuator Tab Systems b> for only $1,449 from NVN Marine! Free same day delivery before 3 p.m. Lenco Auto Glide Boat Leveling System with Single Actuator Tab Systems Videos Lenco Auto Glide Boat Leveling System with Single Actuator Tab Systems Technical Specifications
| Type: | Boat layout | Compensating tabs |
|---|---|
| Seller: | Lenco Marine |
| Weight: | 4.2 lbs |
| Weight Shipping Weight: | 4.2 lbs |
|---|---|
| Box Sizes: | 7.00 (h) x 7.00 (w) x 15.00 (w) |
| Cubic feet: | 735.0 |
| Returnable: | Yes |
| P65: | Yes |
- Lenco Auto Glide Boat Leveling System with Dual Actuator Tab Systems
- Lenco Auto Glide Adapter Extension Cable 50'
- Lenco Auto Glide Adapter Extension Cable 40'
- Lenco Auto Glide Adapter Extension Cable 30'
- Lenco Auto Glide Adapter Extension Cable 20'
- Lenco Auto Glide Adapter Extension Cable 10'
- Lenco Auto Glide Adapter Cable for SmartCraft / Mercury - 2.5'
